* dead fast tps
* oooooh map avg on hh7
* adc v4 fast support
* new fast API
* hardware.cpp
* adc v2
* warning
* guard
* no check required
* stub cypress/kinetis
* kinetis and cypress stubs
* fix for stepperHbridgeHardware
* new config fields for microstepping
* add stepper dir pin mode to the dialog
* refactor stepper hw dialog & add microstepping panel
* microstepper modes enum
* stepperDcInvertedPins needed by Hellen
* add sleep() for stepper and divisor for pause()
* microstepping impl.
* make unit-tests more happy
* small progress
* fix etb-stepper dlg conflict
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
* more unification
* hip stub
* comment
* guard
* channel idx
* include
* hip
* move in to engine
* hip9011
* dead stuff
* dead
* fsio
* lcd
* more dead
* d
* dead code
* all your ram are belong to me
* turn off gpiochips we don't need
* save
* save by using the same file handle
* smaller stack ok
* these can be on the stack
* this is closer
* what about ccm?
* probing available
* now probe ccm
* ccm
* put stuff in ccm
* fsio
* memory usage
* memory
* allow re-register of the same sensor
* add api to unsubscribe
* do it for tps
* clear the pin
* happy test
* maybe make afr happy for now
* tests build
* happy simulator
* active configuration
* check valid
* we need vbatt now
* manage all pin init in init_sensors.cpp
* don't need that
* cleanup
* thermistors
* do two phase reinit in the right place
* config vs engine
* finally the tests are happy
* Typo fix
* flash_main: always allow to write settings to ext NOR while running
* mc33810: do not enable outputs right after undervoltage
Wait for next active signal
* QSPI flash: set correct dummy cycles for fast read command
* board subaru: fix connector pinout. again.
* board subaru: fix SDMMC pin configuration
* board subaru: fix DMA conflict SPI4_RX vs SDMMC2
* flash_main.cpp: reorder code for easy integration of ext storage
* Add EFI_STORAGE_INT_FLASH option
Default set to TRUE
* Add ChibiOS's Managed Flash Storage to build
* Add support for QSPI flash (SST26F064A tested)
* board: subaru: enable WSPI and NOR flash drivers
* Add option to save settings on ext flash MFS partition
* board: subaru: store settings on QSPI NOR flash
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* perform extra-step-prevention in the stepper driver itself
* isBusy flag
* I am unable to type
* the court of public opinion has decided that greater-equal is correct
* that sets target in steps, not percent
* correct var name
* mock stepper motor
* testable stepper
* build is happy
* helping build
* STM32F7xx: flash write parallelism settings
Datasheed allows 32bit program operation only for 2.7..3.0
While RM defines wider range...
* Add parentheses to defines
* intFlash: show all errors to user
Currently only erase error was exported to user. Flash write error
was silent. Also define few additional error codes and show it to
user.
* CanTxMessage usable from unit test
* testLuaReturnsNil
* CAN hook and tests
* it helps if parameter names exist
* nameless params
* s
* redefinition of default argument
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* detect hse
* implementation
* these boards don't need to set their own HSECLK
* assertions
* name
* tweaks
* how did this compile?
* s
* biiiig comment
* this script doesn't need to set 25mhz any more
* ....or PLLM
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* CAN HW: use designated initizalization
* board subaru eg33: set CAN transceiver EN to active state constantly
While FW does not handle CAN transceiver's EN signal
* tle6240: fix Matt's trap
* map: report some default value if no map sensor configured
Othervise user will get "unexpected MAP value" warning
Thread 2 hit Breakpoint 1, validateMap (mapKPa=3121.66162) at ./controllers/sensors/map.cpp:126
126 if (cisnan(mapKPa) || mapKPa < CONFIG(mapErrorDetectionTooLow) || mapKPa > CONFIG(mapErrorDetectionTooHigh)) {
(gdb) bt
0 validateMap (mapKPa=3121.66162) at ./controllers/sensors/map.cpp:126
1 0x002717dc in getMap () at ./controllers/engine_cycle/map_averaging.cpp:334
2 0x0028175a in GetMapWrapper::getMap (this=0x2004214c <mapWrapper>) at ./init/sensor/init_map.cpp:12
3 0x0028177c in operator() (__closure=0x0) at ./init/sensor/init_map.cpp:20
4 0x002817a8 in _FUN () at ./init/sensor/init_map.cpp:21
5 0x002811de in FunctionPointerSensor::get (this=0x20042150 <mapSensor>) at ./controllers/sensors/function_pointer_sensor.h:24
6 0x002651c0 in SensorRegistryEntry::get (this=0x2003ddf0 <s_sensorRegistry+48>) at ./controllers/sensors/sensor.cpp:111
7 0x002653e2 in Sensor::get (type=SensorType::Map) at ./controllers/sensors/sensor.cpp:208
8 0x00261f38 in updateTunerStudioState (tsOutputChannels=0x2003d2e8 <tsOutputChannels>) at ./console/status_loop.cpp:637
9 0x00262e48 in prepareTunerStudioOutputs () at ./console/status_loop.cpp:900
10 0x00260914 in TunerStudio::cmdOutputChannels (this=0x20021a64 <tsInstance>, tsChannel=0x2003d4dc <usbChannel>, offset=0, count=340) at ./console/binary/tunerstudio_commands.cpp:24
11 0x00260584 in TunerStudioBase::handleCrcCommand (this=0x20021a64 <tsInstance>, tsChannel=0x2003d4dc <usbChannel>, data=0x2003d4e1 <usbChannel+5> "", incomingPacketSize=5)
at ./console/binary/tunerstudio.cpp:701
12 0x0025fb3c in tsProcessOne (tsChannel=0x2003d4dc <usbChannel>) at ./console/binary/tunerstudio.cpp:537
13 0x0025fbe2 in TunerstudioThread::ThreadTask (this=0x2003d608 <usbConsole>) at ./console/binary/tunerstudio.cpp:554
14 0x0025f094 in ThreadController<1200>::StaticThreadTaskAdapter (thread=0x2003d608 <usbConsole>) at ./controllers/system/thread_controller.h:37
15 0x0020035e in _port_thread_start () at ChibiOS/os/common/ports/ARMCMx/compilers/GCC/chcoreasm_v7m.S:201
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* memory
* memory
* rename
* core
* structing
* more
* makefile
* structing
* 6240 compiles
* explicit cast instead of implicit narrowing
* 8888
* no extern C
* fix tests build
* extern "C"
* 33810
* 8860
* 33810
* linker
* unbreak master
* don't need that if compiling as C++
* bump config
* fix test
* tests
* unit tests bad merge
* build
* move subaru logic to cpp file
* cpp goodness
* hpp include
* this is probably the right thing to do
* simulator
* lua on f4
* move perf trace to efifeatures
* check that it's defined
* cypress and kinetis
* it would help to define the correct thing
* disable buffer if not used
* we can work with 2k
* turn off ramdisk on mre qc
* wow strncpy is useless for truncated strings
* turn off for bootloader
* lto bootloader
* remove callback parameter from cj125
* remove from ext
* remove stateChangeCallback
* alt doesn't need that
* demorgan
* remove call
* bad cut/paste
* check the actual pin in the test
Andrey G
Matthew Kennedy
Andreika
rusefillc
Andrey
alxrMironov
David Holdeman