* calculate BOARD_DIR exactly once
* deduplicate board scripts
* unit tests
* make passes variables to openblt build properly
* was this an intentional omission?
* s
* prometheus
* prometheus
* remove third trigger
* clean up the honda mess
* there was nothing novel about this engine config
* include
* missed a few
* s
* x
* changelog
* don't set the third trigger input
* don't redefine the same thing 3 times
* only two inputs!
* test
* 2 byte pin index #4097
* 2 byte pin index #4097
good time to defragment configuration
* 2 byte pin index #4097
new fancy way
* 2 byte pin index #4097
smart comment
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
* make things c++ friendly
* install various canaries in coal mines
* using is much clearer than typedef
* fixing builds
* lps25
* trigger includes were a mess
* c -> c++ cleanup
* os util
* why did so many include os_util.h?
* fwd declare
* cypress/kinetis
* s
* eg33 happy
* happy sim
* cypress usb
* pch
* cypress
* doesn't need to include all that
* h7
* MRE
* proteus
* weird format lol
* alphax 4
* alphax 2ch
* prometheus, subaru
* s
* put a canary in the coal mine
* activate the sleepy canaries
* atlas
* tdg pdm
* The canary detected the problems it needed to
This reverts commit b0a3718b115f69f85f78fc4814aec04434968c0f.
* Revert "activate the sleepy canaries"
This reverts commit f80cfcdd789418caa30854064bcb9ce865eee474.
* prometheus
This way you can use the console/TunerStudio with the ST-Link
In the process, combine TS_PRIMARY_UART and TS_PRIMARY_SERIAL into TS_PRIMARY_PORT, to make UART vs
SERIAL selection more robus. Ditto for TS_SECONDARY_*. Also change use of TS_NO_PRIMARY to be #if
not #ifdef, so that it can be properly set as a compile flag and not be overwritten by various
header files.
* fuel pump
* s
* call correct callback
* more dead
* test adjustment
* don't overflow
* don't need separate function
* java
* give it a name
* generated
* generated
* add to generate script
* import *
* this is so cheap we don't need a flag
* static functions with (void)
* more
* Revert "more"
This reverts commit 246e53441f935451437df186ac92d7df26b62fb6.
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* Makefile: define BOOTLOADER=1 for linker in case of OpenBLT too
This will reserve first 32K of flash for bootloader.
* OpenBLT: include into build
* board: subaru eg33: add OpenBLT board code
* board: subaru eg33: use OpenBLT
* Board: Subaru EG33: OpenBLT: reuse HAL and CMSIS from OpenBLT submodule
* Board: Subaru EG33: OpenBLT: reuse linker file from OpenBLT too
* OpenBLT for MRE
* OpenBLT: MRE: adjust LD memory map for smallest variat of MCU on MRE
* OpenBLT: enable for MRE
* OpenBLT: disable CRC check of user application
This allows us to use DFU tool to flash main application too.
* hex2dfu: fresh binary for linux
* OpenBLT: extract common part of OpenBLT makefiles to openblt.mk
* OpenBLT: enable CRC check of user application for MRE and EG33
CRC (actually just a summ) of few first vectors is stored at 0x1c
offset. This is reserved vector for Cortex-M3, M4 and M7
* common_make: append OpenBLT CRC to dfu files
This should allow to use DFU to do main application update when
when OpenBLT is used as bootloader. hex2dfu will store same
styled CRC as OpenBLT expects to see in user app.
* OpenBLT reorganization
Move common stuff to hw_layer/ports/
* OpenBLT: proteus
* Proteus: enable OpenBLT for F4 and F7
Compilation tested only
* more unification
* hip stub
* comment
* guard
* channel idx
* include
* hip
* move in to engine
* hip9011
* dead stuff
* dead
* fsio
* lcd
* more dead
* Typo fix
* flash_main: always allow to write settings to ext NOR while running
* mc33810: do not enable outputs right after undervoltage
Wait for next active signal
* QSPI flash: set correct dummy cycles for fast read command
* board subaru: fix connector pinout. again.
* board subaru: fix SDMMC pin configuration
* board subaru: fix DMA conflict SPI4_RX vs SDMMC2
* flash_main.cpp: reorder code for easy integration of ext storage
* Add EFI_STORAGE_INT_FLASH option
Default set to TRUE
* Add ChibiOS's Managed Flash Storage to build
* Add support for QSPI flash (SST26F064A tested)
* board: subaru: enable WSPI and NOR flash drivers
* Add option to save settings on ext flash MFS partition
* board: subaru: store settings on QSPI NOR flash
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* detect hse
* implementation
* these boards don't need to set their own HSECLK
* assertions
* name
* tweaks
* how did this compile?
* s
* biiiig comment
* this script doesn't need to set 25mhz any more
* ....or PLLM
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* CAN HW: use designated initizalization
* board subaru eg33: set CAN transceiver EN to active state constantly
While FW does not handle CAN transceiver's EN signal
* rename
* core
* structing
* more
* makefile
* structing
* 6240 compiles
* explicit cast instead of implicit narrowing
* 8888
* no extern C
* fix tests build
* extern "C"
* 33810
* 8860
* 33810
* linker
* unbreak master
* don't need that if compiling as C++
* bump config
* fix test
* tests
* unit tests bad merge
* build
* move subaru logic to cpp file
* cpp goodness
* hpp include
* this is probably the right thing to do
* simulator
* engine math: extrant getFiringOrderTable for reuse
* engine math: getNextFiringCylinderId helper
* introduce knock_logic: first member is getCylinderKnockBank()
moved from software_knock.cpp
* hip9011: support two inputs/banks
* fix CI
* Board Subaru EG33: populated with TPIC8101 with Advanced mode
* hip9011: test communication in advanced mode
* hip9011: handle situation when chip is already in advanced mode
* Board Subaru EG33: cylinder to knock bank mapping
* hip9011: count spi transactions in advansed mode too
* hip9011: reset incalid responce counter after chip initialization
* hip9011: make debug output more structured
* carve out UART specific
* implement channel
* config cleanup
* use new config
* bootloader
* dead code
* s
* h7 inherits f7
* oops
* ok now it's right
* tests
* cleanup
* call setup
* put that in its own file
* cleanup
* format
* guard
* not needed
* improve guarding
* portable
* allow override of uart mode
* fixes for bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* new apis
* dedicated USB path
* move decl
* init
* don't init usb twice
* guard
* check that we're initialized before using TS
* comment
* guard
* guard USB
* brain doesn't go good
* make tests happy
* dead define
* cypress
* ifdef != if
* s
* include priority
* don't start a thread we know we don't need
* bad-ish merge
* const
* why did this code exist...?
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* Board subaru eg33: has HIP9011 knock sensor
* hip9011: lastExecutionCount does not exist any more
* hip9011: extranc commands to header, use logic math for bitfields
* maybe hook up sdmmc
* the complier didn't like that very much
* mcuconf
* guard properly
* fix
* duh
* omg that's an extra close paren
* explicitly set which device fatfs should use
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* move f4 config files
* don't need this
* f7
* f7
* h7
* this was duplicated
* turn off smart build
* loader too
* update prometheus paths
* bootloader should include confdir
* fix the flash size while we're at it
* move chconf_common
* use wait
* normalize board.mk
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* remove EFI_ADC_TEMP_SENSOR
* implement
* comment
* s
* switch adc_inputs over
* header
* s
* I think aligned-on-stack should work ok
* num channels
* cache safety
* move adc init too
* don't compile that file for the h7
* cypress & kinetis
* ports
* guard against bootloader
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead
* move board.c
* set explicit cpu type for simulator
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* set mcu type in hw_ports
* move f4 linker script
* move f7 linker script
* don't set default linker file in makefiles
* extra line
* prometheus actually didn't depend on anything special for f469
* dead line
* h7
* dead