- Fix return value on succesfull scsi_requestsense.
- Fix calls to LL SMT32 API for OTG2.
- Port changes from ChibiOS fatfs_diskio.
- Rework checks to allow simultaneous use of SD Card and USB MSD.
Signed-off-by: José Simões <jose.simoes@eclo.solutions>
This was removed in commit
ae7a4d40b84d8afc999691577210696f16e682f6#diff-7ddaa5ecc31109f41b7801dea2660b47
But I think is still necessary as the underlying rccEnableAHB macros
take parameter 'lp'. It seems to work for the F0xx series, because its
rccEnableAHB ignores the 'lp'. It is required when I tried to use the
CRC driver on a family that does require the 'lp' parameter in the lower
level macros.
list_for_each_entry_safe is only safe when the current entry is being removed.
If other entries in the list could potentially be removed it can result in an infinite loop.
Because usbh_lld_ep_close blocks on each urb during iteration, it may give up its lock on
the system and allow an interrupt to remove a different urb from the list,
resulting in an infinite loop when the thread resumes.
RCC API changed in 01/2018 so apply the changes.
Note that ae7a4d40b8 partially fixed the changes in QEI module but some were missing.
So update the other modules too.
RCC API changed in 01/2018 so apply the changes.
Note that ae7a4d40b8 partially fixed the changes in QEI module but some were missing.
So update the other modules too.
- general cleanup
- implemented workaround to undocumented erratum (the OTG core may
report successful enabling of port when connecting a low-speed device,
but really it generates no traffic and remains in a "dumb" state)
- improved handling of disconnection of devices (avoid submitting URBs
if the port is disabled)
- Cleaned up alignment macros for GCC & IAR
- Corrected EP halt and Clear halt behaviours
- Initialization of class drivers by USB Host main driver
- Minor cosmetic fixes
- Updated USB_HOST testhal app