e75bb117dd
Fixed CONFDIR missing in PAL makefiles
2018-03-12 19:25:44 +01:00
e38bf60447
Aligned Tiva Makefiles
2018-03-12 19:18:39 +01:00
32cdf41174
Fixed warnings triggered by -Wundef compile option
2018-03-12 19:04:54 +01:00
0b539b26b0
Simplified a makefile by using the new variables
...
Also disabled FPU, added license makefile and added -Wundef to C and C++ warnings.
2018-03-10 15:34:41 +01:00
5e65e52f28
Fixed wrong variable name for ASM files
2018-03-10 15:32:24 +01:00
4aa00494c2
Added shared variables to startup, board and platform makefiles
2018-03-10 14:58:45 +01:00
aa8c6cc4af
Merge pull request #145 from marcoveeneman/tiva_improvements
...
Various Tiva improvements
2018-03-08 21:42:35 +01:00
f113e89354
Updating chconf.h for STM32 testhal
2018-03-08 20:29:02 +01:00
ae7a4d40b8
Fixes for STM32F0 testhal
2018-03-08 20:14:13 +01:00
32f792087a
Merge pull request #139 from wiml/kinetis_sdhc
...
Add support for the Kinetis SDHC peripheral
2018-03-08 17:13:30 +01:00
6927538038
Merge pull request #136 from wiml/k64_uarts
...
Added support for additional UARTs (up to six on the K64F).
2018-03-08 17:11:14 +01:00
11066ebbd3
Merge pull request #143 from qmk/fix_kinesis_usb_data_sync
...
Fix Kinetis usb databank synchronization problems
2018-03-08 17:09:26 +01:00
14c851fdab
Merge pull request #141 from qmk/17.6.3_fixes
...
Add usb_lld_wakeup_host for Kinetis
2018-03-08 17:09:10 +01:00
be0446c549
Updated all mcuconf.h files to include PAL IRQ settings.
2018-03-07 20:44:42 +01:00
9ef6a86060
Renamed GPIO IRQ priority definitions for the PAL driver
2018-03-07 20:38:10 +01:00
1febc19597
Added PAL testhal application to travis build script
2018-03-02 18:58:34 +01:00
defeba5d06
Removed EXT testhal application from travis build script
2018-03-02 18:58:02 +01:00
b08f095a7e
Removed EXT testhal application
2018-03-02 18:55:41 +01:00
9a21d8e143
Removed EXT driver files
2018-03-02 18:55:22 +01:00
2a01a63f86
Disabled tickless timer for TM4C129x demos.
2018-03-02 18:40:55 +01:00
e7478cb78d
Added multi target testhal application for PAL driver.
2018-03-02 00:11:46 +01:00
2977a2bc87
Implemented events to PAL driver for Tiva devices.
...
Most code from the EXT driver could be reused.
2018-03-02 00:09:45 +01:00
f8b91dc682
Added number of GPIO pins to TM4C129x registry.
2018-03-02 00:07:02 +01:00
7057148a43
Fixed hal_st_lld still using old register access.
...
Registers are now accessed using the HWREG() macro.
2018-03-02 00:05:39 +01:00
ff7d474ecd
Updated platform.mk files to handle halconf.h files located in CONFDIR
2018-03-02 00:02:48 +01:00
927b3cf1b4
Fixed bug in pal_lld_writepad implementation
2018-03-01 23:13:01 +01:00
cae865f0b9
Changed PAL driver so that TM4C123x devices GPIO blocks always use AHB.
2018-02-28 18:28:02 +01:00
6b277eb3db
Fixed startup makefiles
...
vectors.c was replaced by vectors.S
2018-02-27 20:59:58 +01:00
bf1167e3c6
Updated all halconf.h files
2018-02-27 20:52:58 +01:00
a59f29723c
Updated all chconf.h files
2018-02-27 20:46:18 +01:00
b5a45b5472
Merge pull request #144 from marcoveeneman/remove_duplicate_tiva_launch_configurations
...
Removed duplicate OpenOCD on ICDI launch configurations.
2018-02-26 21:06:31 +01:00
a71feeacc3
Removed duplicate OpenOCD on ICDI launch configurations.
...
Starting from ChibiOS 17.6.4 and ChibiOS 18.2.0 OpenOCD launch configuration will be placed under ($CHIBIOS)/tools/eclipse/debug/
2018-02-12 18:41:28 +01:00
b7f761313c
Fix data usb data toggle sync problem
...
USB control transfers are structured as the following.
For incoming transfers
Setup (Data0 out)
Data (Data1/Data0 in) - starting with data 1
Status (Data1 out)
For outgoing transfers
Setup (Data0 out)
Data (Data1/Data0 out) - starting with data 1
Status (Data1 in)
The in buffers (device to host) are always correctly synchronized, since
they can always be reset to Data1 each setup packet without any
synchronization problems.
The problem occured for outgoing transfers (host to device). For
incoming transfers the data banks always alternates, and will
automatically stay in sync. Outgoing transfers also stays in sync when
there's an odd number of data packets. However when the number is even,
including zero, then the last packet received by the device will be
data0 and the next setup packet also has to be data0, so there's a
synchronization problem.
This itself is not a problem since data toggle synchronization(DTS) is
ignored for setup packets, however if the follwoing packet after that
is also an out packet, then the data bank will be wrong and the packet
dropped. In this case the USB spec don't allow sending a nack, so it
will only recover after a timeout, when the host tries to send a new
setup packet.
The old code tried to take care of this situation by reinitializing
both data banks when a setup packet is received. The problem is that the
next packet might already have been received or is in progress of being
received at this point, so the fixup comes to late. The new code does
the fixup when a status packet is about to be sent from the device to
avoid this problem.
2018-02-08 08:34:51 +02:00
1178cf761c
Fix typo in k20xx.h
2018-02-08 08:34:14 +02:00
432bc1762f
Add usb_lld_wakeup_host for Kinetis
2018-02-03 17:25:31 +02:00
f2f4ed8ca4
Merge pull request #140 from elagil/master
...
Added support for STM32F7
2018-01-31 22:12:23 +03:00
90b7d6bbd0
Added support for STM32F7
...
Tested only for STM32F746, other chipsets have to be checked.
2018-01-31 09:55:38 +01:00
7e51a3bcfa
Use an interrupt instead of polling for simple commands.
...
Updated some comments and some trace statements.
2018-01-18 18:23:07 -08:00
48d924c24b
Improved error handling: check the card's state before trying to abort
...
a failed data transfer; translate card status bits into HLD error
bits. Set BLKATTR_BLKCNT even when it's not being used, which seems to
avoid errors when alternating between multi-block and single-block
transfers. Some comments.
2018-01-18 01:33:04 -08:00
ee3f7f1b85
Low-level driver for the Kinetis SDHC peripheral as found on the MK64FX512
...
and other members of the Kinetis family.
2018-01-06 03:17:53 -08:00
b5321c7e0e
Merge pull request #137 from dflogeras/add-stm32f769-to-sdram
...
Add STM32F769 to FSMCv1 sdram driver
2017-12-15 21:12:39 +03:00
5cc37ffd32
Add STM32F769 to FSMCv1 sdram driver
2017-12-14 16:25:15 -04:00
c4eb6b4901
Added support for additional UARTs (up to six on the K64F).
...
Also moved some code that is duplicated per-UART into
local functions to reduce the amount of duplication.
2017-12-08 19:42:13 -08:00
a08a28e32d
Fixed I2C and UART testhal demos
2017-11-24 22:26:11 +01:00
19efef2f4a
Fixed hal_i2c_lld.c
2017-11-24 22:25:12 +01:00
93dd54ecdc
Fixed compile errors in demos
2017-11-24 22:23:27 +01:00
77bf52e042
Updated startup makefiles with new path to CMSIS Core headers
2017-11-23 21:47:09 +01:00
ec4b244c51
Merge pull request #125 from marcoveeneman/tiva_add_uart
...
Add Tiva UART driver.
2017-11-23 21:37:24 +01:00
ab3f7c22cc
Merge pull request #133 from belak/k20x-mcg-c2
...
Fix for K20x startup
2017-11-04 17:32:26 -02:00
96413f3767
Fix for K20x startup
2017-11-04 10:41:06 -07:00
marcoveeneman
Fabien Poussin
Fred Sundvik
Uladzimir Pylinski
Adrian
Wim Lewis
Dave Flogeras
Fabio Utzig
Kaleb Elwert