flywoo
22548e0af1
Update target flywoof411 config
2019-10-17 15:34:11 +08:00
flywoo
485526e6ec
Update target config for FLYWOOF7DUAL,F405,F411
2019-09-14 19:06:28 +08:00
Michael Keller
4557e37056
Fixed incomplete removal of DJI HDL in CLI. ( #8746 )
...
Fixed incomplete removal of DJI HDL in CLI.
2019-08-24 18:15:01 +12:00
Michael Keller
22e8f9f9b0
Merge pull request #8650 from bnn1044/TALONF7V2-UNIFIED-TARGET
...
Add TALON F7 V2 UNIFIED TARGET
2019-08-24 16:00:14 +12:00
mikeller
ec6fa21a90
Fixed incomplete removal of DJI HDL in CLI.
2019-08-23 09:12:45 +12:00
Michael Keller
8826175b08
Merge pull request #8621 from MerakRC/master
...
Added MERAKRCF405 target and MERAKRCF722 target
2019-08-23 08:49:40 +12:00
Merak RC
57dcae950f
Added MERAKRCF405 target and MERAKRCF722 target
2019-08-23 00:49:59 +08:00
Michael Keller
d75d8a3c76
Merge pull request #8741 from mikeller/fix_softserial_pin_sharing
...
Fixed SOFTSERIAL when the TX and RX pins are shared.
2019-08-21 23:06:40 +12:00
Michael Keller
d331aed726
Merge pull request #8723 from schugabe/pin_up_down_config
...
Add resource option to configure unused pins as pulldown
2019-08-21 22:55:48 +12:00
Michael Keller
d746b4d3e7
Merge pull request #8738 from fredericmorin/cms_cam_angle
...
Added CMS entry for cam angle compensation config
2019-08-20 11:56:18 +12:00
Johannes Kasberger
f761d9c87e
reset all elements of the pullup pulldown pg configuraion array
2019-08-19 23:23:18 +02:00
Frederic Morin
5c107c55ba
Added CMS entry for FPV CAM ANGLE compensation config
2019-08-19 17:13:36 -04:00
mikeller
63bcfd1801
Fixed SOFTSERIAL when the TX and RX pins are shared.
2019-08-20 01:01:35 +12:00
Michael Keller
a05b819b71
Remove overshoot in warning suppression introduced in #8713 . ( #8733 )
...
Remove overshoot in warning suppression introduced in #8713 .
2019-08-19 23:34:21 +12:00
Michael Keller
cbe8749d69
Fix RTC local time formatting (timezone offset) when no valid d… ( #8731 )
...
Fix RTC local time formatting (timezone offset) when no valid date/time
2019-08-19 23:32:48 +12:00
Michael Keller
e7d1d85c19
Merge pull request #8734 from mikeller/fix_custom_defaults
...
Fix extended custom defaults.
2019-08-19 22:54:27 +12:00
Michael Keller
c961c6c557
Merge pull request #8730 from joelucid/erpm_cli
...
report erpm, rpm and hz for convenience in dshot_telemetry_info
2019-08-18 23:21:28 +12:00
mikeller
5c9e51bb5f
Fix extended custom defaults.
2019-08-18 16:12:33 +12:00
Michael Keller
e984af7f80
Add ff_boost to CMS ( #8727 )
...
Add ff_boost to CMS
2019-08-18 12:17:28 +12:00
Michael Keller
47df36c961
Merge pull request #8693 from etracer65/vtxtable_msp
...
Add MSP support for vtxtable
2019-08-18 12:16:33 +12:00
Dominic Clifton
ea61f23703
Merge pull request #8725 from hydra/bf-fix-dma-rw-axi-define
...
Fix incorrect attribute name for DMA_RW_AXI.
2019-08-18 00:44:24 +02:00
Bruce Luckcuck
ee47957dc3
Add MSP support for vtxtable
2019-08-17 17:57:10 -04:00
Michael Keller
8230923a14
Merge pull request #8726 from etracer65/vtx_setting_validation
...
Reset vtx band/channel/power if outside vtxtable ranges
2019-08-18 09:42:04 +12:00
mikeller
865713460e
Remove overshoot in warning suppression introduced in #8713 .
2019-08-18 08:43:15 +12:00
Bruce Luckcuck
9315b8f1b6
Fix RTC local time formatting (timezone offset) when no valid date/time
...
Timezone shouldn't be applied to the "default" invalid date as it can cause underflow for negative timezone offsets.
2019-08-17 11:30:07 -04:00
Thorsten Laux
0d73d51ba8
report erpm, rpm and hz for convenience in dshot_telemetry_info
2019-08-17 10:04:26 +02:00
jflyper
f1cd99e6b6
Merge pull request #8722 from jflyper/bfdev-isolate-msp-from-pwm_output
...
Isolate MSP_MOTOR from pwm_output (pwmGetMotors)
2019-08-17 11:19:20 +09:00
Dominic Clifton
2240f3c679
Merge pull request #8712 from jflyper/bfdev-h7-ll-dshot
...
[H7] LL-Dshot support
2019-08-17 02:20:00 +02:00
Bruce Luckcuck
4213f130cf
Reset vtx band/channel/power if outside vtxtable ranges
2019-08-16 15:27:39 -04:00
jflyper
0780d1919c
[H7] LL-Dshot support with DShot GCR telemetry
2019-08-17 02:11:48 +09:00
Dominic Clifton
064b578d43
Merge pull request #8713 from jflyper/bfdev-h7-fix-ll-for-size-sensitive-spi-reg
...
[H7][LIB] Suppress warnings on type-punned pointers (LL-SPI)
2019-08-16 18:30:00 +02:00
IvoFPV
9a02a407ea
Add ff_boost to CMS
2019-08-16 17:54:43 +02:00
Dominic Clifton
86b2b3a975
Fix incorrect attribute name for DMA_RW_AXI.
...
This caused SD card to break in EXST targets.
The attribute name was wrong!
linker scripts use `DMA_RW_AXI`, e.g.
```
.DMA_RW_AXI (NOLOAD) :
{
vs
```
#define DMA_RW_AXI __attribute__((section(".DMA_AXI_RW")))
```
2019-08-16 13:39:11 +02:00
Johannes Kasberger
6a713a0340
add pull_up to names, change pg config to array of elements, use correct DEFs
2019-08-15 18:59:28 +02:00
jflyper
880a5d6b55
[H7][LIB] Supress strict aliasing rule warnings on deferencing type-punned pointers
2019-08-16 00:24:08 +09:00
Michael Keller
2f8c6eacd9
Fixed Unified Target configuration names, added check for corre… ( #8715 )
...
Fixed Unified Target configuration names, added check for correctness.
2019-08-15 14:58:23 +12:00
Michael Keller
c91b18098c
Simplified configuration of fast SBus. ( #8716 )
...
Simplified configuration of fast SBus.
2019-08-15 12:48:15 +12:00
Johannes Kasberger
cc9687a2bf
Add resource option to configure pin as pullup or pulldown input
...
all pins are initialized to pullup inputs per default. With resource PULLDOWN 1 PIN it is
possible to reconfigure the pin so it is a PULLDOWN input.
With this it's possible to prevent certain errors on some boards that have multiple pins connected
with an inverter and the pullup flows back via the inverter and pulls other pins low (see #7849 )
2019-08-14 22:34:34 +02:00
jflyper
11994e6ab8
Isolate MSP_MOTOR from pwm_output (pwmGetMotors)
2019-08-14 23:50:13 +09:00
Cheng Lin
414e1ac7ed
Add TALON F7 V2 UNIFIED TARGET
...
update cc2500:
update from upstream
add TALONF7V2 UNITIED TARGET
2019-08-14 09:28:57 -04:00
Michael Keller
811eeea542
Fixed warnings when no custom defaults are found. ( #8720 )
...
Fixed warnings when no custom defaults are found.
2019-08-15 00:40:37 +12:00
Michael Keller
1c6949419c
[H7] SDMMC2 support ( #8697 )
...
[H7] SDMMC2 support
2019-08-14 23:54:04 +12:00
Michael Keller
51e4162419
Rename overlooked Dshot command function name ( #8714 )
...
Rename overlooked Dshot command function name
2019-08-14 23:43:10 +12:00
Michael Keller
c8958e80cc
Added Unified Target configuration and manufacturer id for SPEE… ( #8717 )
...
Added Unified Target configuration and manufacturer id for SPEEDYBEEF4.
2019-08-14 23:08:55 +12:00
mikeller
0e2f7bcc3f
Fixed warnings when no custom defaults are found.
2019-08-13 23:27:19 +12:00
mikeller
cad08b6f4b
Added Unified Target configuration and manufacturer id for SPEEDYBEEF4.
2019-08-13 23:04:03 +12:00
mikeller
c31c8f9fbb
Simplified configuration of fast SBus.
2019-08-13 22:17:33 +12:00
mikeller
c964eba295
Fixed Unified Target configuration names, added check for correctness.
2019-08-13 21:42:08 +12:00
Michael Keller
52173c7981
Remove DEBUG_MODE from SPRACINGH7 targets ( #8700 )
...
Remove DEBUG_MODE from SPRACINGH7 targets
2019-08-13 19:37:05 +12:00
jflyper
bb8e0686c1
Rename overlooked Dshot command function name
2019-08-13 16:27:34 +09:00