CF/BF - Fix typo in max7456DmaInProgress. Always define an
implementation even when there is no TX-DMA.
CF/BF - Ensure that max7456 communication does not disrupt RTC6705
communication when using the same SPI port for both.
CF/BF - Port RTC6705 to use the VTX API.
* Support VTX channel/band/power on OSD for ALL vtx APIs - previously it only supported RTC6705.
* Remove all FEATURE_VTX usage.
* Remove all `#define VTX` usage.
Note that due to the async nature of tramp/smartaudio it's not possible
to know the current band/channel after requesting a change (as the
request hasn't been processed) so it makes no sense to try and save the
config - and on the tramp/smartaudio vtx the vtx maintains it's state.
So on an RTX6705 equipped FC the user should now MANUALLY save the
config using the save config stick position.
CF/BF - Move CMS for RTC6705 into vtx_rtc6705.c for consistency with
other VTX CMS menus.
CF/BF - Update RTC6705 via SOFT SPI to use VTX API.
* Achieved by simply aligning the API at the driver level and removing
all legacy conditional compilation checks.
CF/BF - Use new IO for RTC6705 CLK Hack
CF/BF - Port VTX button from CF v1.x.
Features:
* Channel Cycle
* Band Cycle
* Power Cycle
* Save Settings
* Works with any VTX using VTX API.
CF/BF - Allow support for Internal and External VTX - External takes
precedence when configured.
CF/BF - Fix display of VTX power in CMS.
* Issue occured when CMS was transitioned from integer to list of
strings.
CF/BF - Disable SMARTAUDIO and TRAMP on the SPRacingF3NEO due to flash
size.
CF/BF - Cleanup const usage of bass-by-value parameters. Cleanup
naming.
CF/BF - Cleanup naming. Removing noise-words. Improving consistency.
CF/BF - Improve readability by further naming cleanups.
CF/BF - Remove some magic numbers in the RTC6705 VTX code.
CF/BF - Use braces on some procedural macros.
CF/BF - Improve code readability by renaming rtc6705SetChannel to
rtc6705SetBandAndChannel.
CF/BF - Remove editor mishap.
CF/BF - Make the rtc6705Dev variable static.
CF/BF - remove duplicate state variablertc6705Dev_t - vtxDevice_t had
all we needed. Use brackets on some procedural style macros. Make all
the vtx vtable static const.
CF/BF - making some declarations const.
CF/BF - Fix vtx_power maximum value (out by one).
system for VTX CS pin. Fix missing VTX CS GPIO pin initialisation.
Ensure VTX CS is set correctly when enabling the VTX module.
Configure VTX module boot delay - 50ms in old code was too slow on some
cold boots.
VTX SPI divisor is now set each time an SPI transfer occurs so that the
VTX module can co-exist on the same SPI bus as other devices - NEO uses
MAX7456 and RTC6705 VTX on the same SPI bus.
In CF 1.x the structure was packed, resulting in a size of 14 bytes.
The servoParam_t is not currently packed, likely due to recent PG group
implementation, so the test for data length in the MSP command fails.
- STM32F4-based flight controller
- Onboard NRF51 soc with custom serial rx protocol (Bluetooth or ESB)
Two general changes to Betaflight included:
- Ability to customize MPU I2C address in target.h (MPU6500's address
can be changed in hardware by holding a pin high)
- Addition of a target-specific serial type. Targets must opt-in in
their target.h and provide an implementation of the interface to
convert their custom Rx protocol into RawRC for Betaflight
and horizon_tilt_expert_mode command.
Modified 'calcHorizonLevelStrength()' function.
Changed 'd_level' (D8[PIDLEVEL]) default from 100 to 75
Added horizon static float vars
Michael Keller
Hydra
Martin Budden
borisbstyle
Dean Brestel
Evgeny
Sean Kelly
Larry Davis
TheAngularity
MARTINKOWALSKY\Martin Kowalsky
Sami Korhonen
ethomas999