blckmn
b8aae2d03e
Licence update for newly added target
2018-05-05 22:21:02 +10:00
J Blackman
7ad5254d89
Merge pull request #5823 from blckmn/licence_update
...
Licences missed during PRs
2018-05-05 18:12:28 +10:00
githubDLG
874b4a0118
update
...
update according to comments, this PR will only add new target. VTX power setting will opened in another PR~
2018-05-05 16:05:28 +08:00
Mark Hale
9897cdbac2
Configure smart port sensors based on runtime configuration.
...
Signed-off-by: Mark Hale <mark.hale@physics.org>
2018-05-05 08:33:49 +01:00
Michael Keller
724c6d72c7
Merge pull request #5822 from mikeller/make_feature_requests_exempt_from_inactivity
...
Make feature requests exempt from detection as 'Inactive'.
2018-05-05 19:05:32 +12:00
blckmn
22b84f12a8
Licences missed during PRs
2018-05-05 17:03:30 +10:00
Michael Keller
8e5485a6dd
Merge pull request #5816 from jflyper/bfdev-asgard32
...
Asgard32 F4/F7 support
2018-05-05 18:38:22 +12:00
Michael Keller
b1a376accc
Merge pull request #5821 from blckmn/source_simplification
...
Simplified source.mk slightly
2018-05-05 18:36:40 +12:00
Michael Keller
5460f8775e
Merge pull request #5820 from jflyper/OMNIBUSF4FW-and-OMNINXT-Use-config-helper
...
OMNIBUSF4FW and OMNINXT Use config helper function
2018-05-05 18:36:23 +12:00
Michael Keller
8f50aad585
Merge pull request #5809 from jirif/rx_rate_calculation
...
Fix rx rate calculation when using fport
2018-05-05 18:34:59 +12:00
Michael Keller
b0ee38d77b
Merge pull request #5807 from etracer65/gyro_both_validation
...
Only allow gyro_to_use = BOTH if both detected gyros are the same type
2018-05-05 18:34:42 +12:00
Michael Keller
65d9e08f1b
Merge pull request #5783 from jflyper/bfdev-max7456-busdevice-conversion
...
MAX7456 Increase (re)configurability
2018-05-05 18:32:02 +12:00
mikeller
20e8ba3707
Make feature requests exempt from detection as 'Inactive'.
2018-05-05 18:07:43 +12:00
Michael Keller
725ab4f4c0
Merge pull request #5818 from mikeller/add_stale_bot_config
...
Added config file for bot to detect / action on stale issues / pull requests.
2018-05-05 17:33:38 +12:00
blckmn
48e62ab8d6
Simplified source.mk slightly to ensure some common, and pg files are always included in build.
2018-05-05 14:37:38 +10:00
jflyper
51998a6e59
Use config helper function
2018-05-05 11:25:13 +09:00
Michael Keller
d93667a48c
Merge pull request #5815 from neilbalch/master
...
"Nuke" mysterious Notes.md file and clean up markdown
2018-05-05 14:00:17 +12:00
jflyper
a6dbbc504e
Asgard32 (PTV) support
2018-05-05 10:35:18 +09:00
Michael Keller
f7d5568d52
Merge pull request #5819 from jflyper/bfdev-introduce-nomk-extension-for-no-build
...
Use ".nomk" to designate "No build" target
2018-05-05 13:10:50 +12:00
Michael Keller
d242de87bd
Merge pull request #5764 from dbasch/gps_rescue
...
[GPS RESCUE] added gps for altitude estimation
2018-05-05 12:48:29 +12:00
jflyper
3364c094e1
Move hard coded defaults out of pgResetFn
2018-05-05 01:22:29 +09:00
jflyper
35df29f0bc
Use nomk to signify no build target name
2018-05-05 01:13:12 +09:00
Bruce Luckcuck
34bdfc00e7
Update gyroregisters cli command to display both gyros
...
If gyro_to_use = BOTH, then display the registers for both active gyros.
2018-05-04 11:46:05 -04:00
Diego Basch
c46be03047
added gps for altitude estimation, remove most unused code, rename altitude.c to position.c, add hdop to nmea
2018-05-04 08:45:26 -07:00
Michael Keller
3e27854f01
Merge pull request #5766 from etracer65/esc_rpm_calc
...
Display ESC telemetry as real RPM in the OSD and telemetry
2018-05-05 00:28:25 +12:00
Bruce Luckcuck
809c2a950b
Update RPM data in smartport and frsky_hub telemetry
...
Both previously displayed eRPM. frsky_hub RPM data is constrained to int16 so the value sent is RPM/10.
Updates per review and function renaming
2018-05-04 07:53:18 -04:00
Bruce Luckcuck
063f3829d4
Display ESC telemetry as real RPM in the OSD
...
The telemetry data provides eRPM/100. Added a `motor_poles` parameter (defaulting to 14) that is used to calculate the physical RPM.
RPM = (telemetry_rpm * 100) / (motor_poles / 2)
Most motors we commonly use are 14 poles, but the user can adjust if needed for their setup.
Also calculate actual RPM for DEBUG_ESC_SENSOR_RPM, but to fit with in int16 the log value will be RPM/10.
2018-05-04 07:51:16 -04:00
Michael Keller
49f2308fd6
Merge pull request #5805 from etracer65/frskyf3_flash_reduction
...
Fixed flash overflow for FRSKYF3
2018-05-04 23:37:53 +12:00
mikeller
ee8f4811eb
Added 'Pinned' to labels preventing closing.
2018-05-04 23:25:16 +12:00
Michael Keller
93ea8347b9
Added config file for bot to detect / action on stale issues / pull requests.
2018-05-04 22:00:15 +12:00
Michael Keller
36c543e547
Merge pull request #5800 from etracer65/gyro_to_use_default_fix
...
Fix dual gyro default logic
2018-05-04 21:14:00 +12:00
Michael Keller
f0ea0e81d4
Merge pull request #5765 from etracer65/gps_speed_units
...
Fix GPS speed and max speed to respect the units selection
2018-05-04 21:11:49 +12:00
jflyper
944a2986a5
Use busDevice_s for reconfigurability
2018-05-04 17:09:56 +09:00
githubDLG
6b65cce9ae
update
...
update
2018-05-04 15:42:27 +08:00
githubDLG
5d716a4397
Update target file
...
Update target file
2018-05-04 15:28:44 +08:00
jirif
fa40fbe865
Fix RX rate calculation when using fport
2018-05-04 07:45:47 +02:00
Michael Keller
75f82c7f2b
Merge pull request #5798 from Faduf/YupiF4_patch
...
YupiF4 Motor output Patch
2018-05-04 15:32:14 +12:00
Neil B
97b787fb72
Cleaned up markdown
...
Added markdown code bash tags and removed whitespace
2018-05-03 20:27:11 -07:00
Neil Balch
01d5fbc754
"Nuke" mysterious Notes.md file
...
git blamed on hydra in 2014, probably left over from original fork
2018-05-03 20:15:52 -07:00
Michael Keller
b100840c26
Merge pull request #5808 from neilbalch/patch-2
...
Add more info to F405-CTR board docs
2018-05-04 15:09:35 +12:00
githubDLG
6c27482f4c
Add new target Stack-X
...
Add new target Stack-X
2018-05-04 10:34:02 +08:00
Neil B
9e6752198c
Make F405-CTR docs more readable
2018-05-03 18:03:10 -07:00
Neil
1fd1bdbb3f
Add softserial info and status LEDs
2018-05-03 14:53:18 -07:00
Neil
86c54ff3ae
Clarify resource command in F405-CTR docs
2018-05-03 14:27:32 -07:00
Neil
b8a9beb732
Add UART list for F405-CTR and update pinout
2018-05-03 12:20:59 -07:00
Neil
b95089da5d
Add note on possible pad conflict
...
And fix terminology for RX5 pad description.
2018-05-03 08:10:37 -07:00
Bruce Luckcuck
ff59c37fdb
Only allow gyro_to_use = BOTH if both detected gyros are the same type
...
Since we currently don't have per gyro configuration, trying to use two different gyro types simultaneously may not provide good results or lead to other unforeseen situations like attempting to initialize with settings not applicable to both hardware types.
This logic looks at the detected gyro types and resets to use only the first one if the user selected "BOTH" and they're different hardware types.
2018-05-03 10:34:13 -04:00
Michael Keller
40e8f77fed
Merge pull request #5802 from neilbalch/patch-1
...
Add Board documentation for Matek F405-CTR
2018-05-04 00:07:31 +12:00
Bruce Luckcuck
3064fbcd0e
Fixed flash overflow for FRSKYF3
2018-05-03 07:38:05 -04:00
Michael Keller
cb19bb16d4
Merge pull request #5793 from etracer65/max7456_double_increment
...
Fix incorrect double increment in MAX7456 screen drawing
2018-05-03 23:32:21 +12:00