J Blackman
781d2612cf
Merge pull request #5833 from mikeller/add_generated_timers
...
Added generated timer definitions for STM32F7X2 universal target.
2018-05-06 15:12:13 +10:00
mikeller
16a96f7318
Added generated timer definitions for STM32F7X2 universal target.
2018-05-06 16:29:39 +12:00
Michael Keller
717444175c
Merge pull request #5824 from blckmn/timer_config
...
Timer configuration
2018-05-06 15:53:02 +12:00
blckmn
c816f64b9e
Additional timer mapping for 7X2 target.
2018-05-06 12:34:28 +10:00
blckmn
6d33fc6b0b
Fixed CC Channel versus Index issue, and added additional mapping in timerHardware for 7X2 target
2018-05-06 12:00:31 +10:00
blckmn
e5031407a6
Configurable timers
2018-05-06 12:00:31 +10:00
Michael Keller
05b6d3d494
Merge pull request #5825 from blckmn/timer_prep
...
Timer clean up in preparation for configurable timers.
2018-05-06 12:59:08 +12:00
blckmn
88ed243d32
Made the timerioTagGetByUsage zero based, as it is not used by users.
2018-05-06 09:37:19 +10:00
blckmn
aad6efdf03
Timer clean up in preparation for configurable timers
2018-05-06 06:55:17 +10:00
Mark Hale
b2e43abf2d
Display anti-gravity activity in OSD.
...
Signed-off-by: Mark Hale <mark.hale@physics.org>
2018-05-05 19:56:56 +01:00
Michael Keller
5e1b5df5d4
Merge pull request #5828 from blckmn/licence_update
...
Licence update for newly added target
2018-05-06 01:31:57 +12:00
Michael Keller
0fe89da76f
Merge pull request #5810 from pulquero/esc-telem-2
...
Configure smart port sensors based on runtime configuration.
2018-05-06 00:42:00 +12:00
blckmn
b8aae2d03e
Licence update for newly added target
2018-05-05 22:21:02 +10:00
J Blackman
7ad5254d89
Merge pull request #5823 from blckmn/licence_update
...
Licences missed during PRs
2018-05-05 18:12:28 +10:00
githubDLG
874b4a0118
update
...
update according to comments, this PR will only add new target. VTX power setting will opened in another PR~
2018-05-05 16:05:28 +08:00
Mark Hale
9897cdbac2
Configure smart port sensors based on runtime configuration.
...
Signed-off-by: Mark Hale <mark.hale@physics.org>
2018-05-05 08:33:49 +01:00
Michael Keller
724c6d72c7
Merge pull request #5822 from mikeller/make_feature_requests_exempt_from_inactivity
...
Make feature requests exempt from detection as 'Inactive'.
2018-05-05 19:05:32 +12:00
blckmn
22b84f12a8
Licences missed during PRs
2018-05-05 17:03:30 +10:00
Michael Keller
8e5485a6dd
Merge pull request #5816 from jflyper/bfdev-asgard32
...
Asgard32 F4/F7 support
2018-05-05 18:38:22 +12:00
Michael Keller
b1a376accc
Merge pull request #5821 from blckmn/source_simplification
...
Simplified source.mk slightly
2018-05-05 18:36:40 +12:00
Michael Keller
5460f8775e
Merge pull request #5820 from jflyper/OMNIBUSF4FW-and-OMNINXT-Use-config-helper
...
OMNIBUSF4FW and OMNINXT Use config helper function
2018-05-05 18:36:23 +12:00
Michael Keller
8f50aad585
Merge pull request #5809 from jirif/rx_rate_calculation
...
Fix rx rate calculation when using fport
2018-05-05 18:34:59 +12:00
Michael Keller
b0ee38d77b
Merge pull request #5807 from etracer65/gyro_both_validation
...
Only allow gyro_to_use = BOTH if both detected gyros are the same type
2018-05-05 18:34:42 +12:00
Michael Keller
65d9e08f1b
Merge pull request #5783 from jflyper/bfdev-max7456-busdevice-conversion
...
MAX7456 Increase (re)configurability
2018-05-05 18:32:02 +12:00
mikeller
20e8ba3707
Make feature requests exempt from detection as 'Inactive'.
2018-05-05 18:07:43 +12:00
Michael Keller
725ab4f4c0
Merge pull request #5818 from mikeller/add_stale_bot_config
...
Added config file for bot to detect / action on stale issues / pull requests.
2018-05-05 17:33:38 +12:00
blckmn
48e62ab8d6
Simplified source.mk slightly to ensure some common, and pg files are always included in build.
2018-05-05 14:37:38 +10:00
jflyper
51998a6e59
Use config helper function
2018-05-05 11:25:13 +09:00
Michael Keller
d93667a48c
Merge pull request #5815 from neilbalch/master
...
"Nuke" mysterious Notes.md file and clean up markdown
2018-05-05 14:00:17 +12:00
jflyper
a6dbbc504e
Asgard32 (PTV) support
2018-05-05 10:35:18 +09:00
Michael Keller
f7d5568d52
Merge pull request #5819 from jflyper/bfdev-introduce-nomk-extension-for-no-build
...
Use ".nomk" to designate "No build" target
2018-05-05 13:10:50 +12:00
Michael Keller
d242de87bd
Merge pull request #5764 from dbasch/gps_rescue
...
[GPS RESCUE] added gps for altitude estimation
2018-05-05 12:48:29 +12:00
jflyper
3364c094e1
Move hard coded defaults out of pgResetFn
2018-05-05 01:22:29 +09:00
jflyper
35df29f0bc
Use nomk to signify no build target name
2018-05-05 01:13:12 +09:00
Bruce Luckcuck
34bdfc00e7
Update gyroregisters cli command to display both gyros
...
If gyro_to_use = BOTH, then display the registers for both active gyros.
2018-05-04 11:46:05 -04:00
Diego Basch
c46be03047
added gps for altitude estimation, remove most unused code, rename altitude.c to position.c, add hdop to nmea
2018-05-04 08:45:26 -07:00
Michael Keller
3e27854f01
Merge pull request #5766 from etracer65/esc_rpm_calc
...
Display ESC telemetry as real RPM in the OSD and telemetry
2018-05-05 00:28:25 +12:00
Bruce Luckcuck
809c2a950b
Update RPM data in smartport and frsky_hub telemetry
...
Both previously displayed eRPM. frsky_hub RPM data is constrained to int16 so the value sent is RPM/10.
Updates per review and function renaming
2018-05-04 07:53:18 -04:00
Bruce Luckcuck
063f3829d4
Display ESC telemetry as real RPM in the OSD
...
The telemetry data provides eRPM/100. Added a `motor_poles` parameter (defaulting to 14) that is used to calculate the physical RPM.
RPM = (telemetry_rpm * 100) / (motor_poles / 2)
Most motors we commonly use are 14 poles, but the user can adjust if needed for their setup.
Also calculate actual RPM for DEBUG_ESC_SENSOR_RPM, but to fit with in int16 the log value will be RPM/10.
2018-05-04 07:51:16 -04:00
Michael Keller
49f2308fd6
Merge pull request #5805 from etracer65/frskyf3_flash_reduction
...
Fixed flash overflow for FRSKYF3
2018-05-04 23:37:53 +12:00
mikeller
ee8f4811eb
Added 'Pinned' to labels preventing closing.
2018-05-04 23:25:16 +12:00
Michael Keller
93ea8347b9
Added config file for bot to detect / action on stale issues / pull requests.
2018-05-04 22:00:15 +12:00
Michael Keller
36c543e547
Merge pull request #5800 from etracer65/gyro_to_use_default_fix
...
Fix dual gyro default logic
2018-05-04 21:14:00 +12:00
Michael Keller
f0ea0e81d4
Merge pull request #5765 from etracer65/gps_speed_units
...
Fix GPS speed and max speed to respect the units selection
2018-05-04 21:11:49 +12:00
jflyper
944a2986a5
Use busDevice_s for reconfigurability
2018-05-04 17:09:56 +09:00
githubDLG
6b65cce9ae
update
...
update
2018-05-04 15:42:27 +08:00
githubDLG
5d716a4397
Update target file
...
Update target file
2018-05-04 15:28:44 +08:00
jirif
fa40fbe865
Fix RX rate calculation when using fport
2018-05-04 07:45:47 +02:00
Michael Keller
75f82c7f2b
Merge pull request #5798 from Faduf/YupiF4_patch
...
YupiF4 Motor output Patch
2018-05-04 15:32:14 +12:00
Neil B
97b787fb72
Cleaned up markdown
...
Added markdown code bash tags and removed whitespace
2018-05-03 20:27:11 -07:00