Checks various features, modes, and OSD elements to determine if ACC is needed. Generates an arming disabled warning if ACC calibration has never been completed.
Isolates and prevents changes to runtime active features. Any changes to enabled features are deferred until after a save/reboot. Simplifies the previous logic.
Prevents potential failures when features are changed at runtime but the underlying code is not capabile of dynamic reconfiguration.
Adds `osd_distance_alarm` (defaulting to 0 for OFF) which behaves similarly to `osd_alt_alarm`. Causes the OSD distance to home element to blink if the alarm setting is exceeded.
Also added to the CMS menu for consistency with the altitude alarm.
Fix incorrect count of dma options for F3.
Value was hardcoded to 3, but the F3 has 4 ADCs.
Fix dmaPeripheralMapping for F3.
The dmaPeripheralMapping table was using index numbers and not device
numbers.
This meant all the dma mappings were out by one, eg.
```
```
ADC 1 is on DMA1, channel 1, but the output from dma ADC 2 list shows
the possibilities for ADC 1, not ADC 2 and shows no possibilities for
dma ADC 1 list
Ensure there are defaults for ADC4 on F3.
Always use 4 ADC instances for the ADC PG.
* PG should not be target dependant.
* Add a static assert which will fail if anything is changed.
Fix dmaopt in ADC PG, it should be a int8_t, not uint8_t
Fix occurrences of -1 that should be `DMA_OPT_UNUSED`.
Fixing this meant that dma_reqmap.h needed to be included in a few
places. When this was done there were errors because dma_reqmap.h was
included more than once and it's `#pragma once` was commented out.
Including dma_reqmap.h from every PG that uses `dmaopt` also caused
other compilation issues, fixed by this commit.
Fix incorrect count of dma options for F3.
Value was hardcoded to 3, but the F3 has 4 ADCs.
Fix dmaPeripheralMapping for F3.
The dmaPeripheralMapping table was using index numbers and not device
numbers.
This meant all the dma mappings were out by one, eg.
```
```
ADC 1 is on DMA1, channel 1, but the output from dma ADC 2 list shows
the possibilities for ADC 1, not ADC 2 and shows no possibilities for
dma ADC 1 list
Ensure there are defaults for ADC4 on F3.
Always use 4 ADC instances for the ADC PG.
* PG should not be target dependant.
* Add a static assert which will fail if anything is changed.
Fix dmaopt in ADC PG, it should be a int8_t, not uint8_t
Handle targets that currently define CAMERA_CONTROL_PIN
- Targets with a valid timer entry for the pin: Def is just deleted.
- Targets without a valid timer entry for the pin: Def is commented out and additional comment is added. The camera control function must have not being working for a long timer for the target anyway.
Instead of having individual menus for RTC6705, SmartAudio, and Tramp, Now there is a single VTX menu that detects the type of active device and redirects to the appropriate protocol menu.
Reduces confusion and chances of erroneously using the wrong VTX menu.
Fixes a problem where the Tramp menu could be used to change band/channel/power even though the VTX was a SmartAudio device.
If the VTX is not configured or not communicating, a more informative message will be presented rather than a partially populated protocol menu. For example:
```
VTX NOT RESPONDING
OR NOT CONFIGURED
> BACK
```
Extends the CMS menu capabilities by adding an optional `redirectCheck` function that can conditionally return a menu that should be redirected to instead of the current menu. This redirect happens before any processing happens for the original menu. Adds flexibility to make the CMS menus have a more dynamic aspect.
Bruce Luckcuck
jflyper
Michael Keller
kaweksl
Reinhard
Dominic Clifton
Kyle K
MJ666