d6db3dbf08
Fix grammar
2015-03-29 23:44:12 -07:00
e110a30efc
Update docs with incorrect info for rssi_channel and add the renamed functionality.
2015-03-29 23:42:55 -07:00
01b811cd8c
Add support for Winbond 64Mbit SPI flash chip
2015-03-30 12:04:41 +13:00
16fda38eba
Merge pull request #625 from OpCode1300/docs
...
Board recovery documentation.
2015-03-28 20:58:55 +00:00
02d8313437
Additional cleanup of generic Flashing docs.
2015-03-28 20:48:01 +00:00
ab30a208e1
Updating generic flashing instructions.
...
Removing link to docs, doesn't make sense when compiled to PDF and all
documentation links must be relative.
2015-03-28 20:46:14 +00:00
499ca8b203
Merge pull request #656 from cmavr8/docs-installation-additions
...
Docs: Added detailed steps for flashing
2015-03-28 20:40:00 +00:00
b40b35e162
Updating GPS tested hardware list. Closes #627
2015-03-28 20:37:43 +00:00
0c82141472
Use preferred alternative formatting for code blocks in Cli.md docs.
...
See #650
2015-03-28 20:20:53 +00:00
0d221bded9
Merge pull request #650 from mtrl/master
...
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-28 20:18:36 +00:00
4e07899a06
Move the updated list of user-tested GPS hardware back into Gps.md - no
...
real reason to split it out to a seperate file. Additionally the
seperate file was not listed in build_docs.sh and therefore was not
included in the PDF documentation.
If there was a section of supported hardware as an appendix to the
documentation that we could move it back, but that should be done for
GPS, RX's, LED, Buzzers, etc and all at the same time.
2015-03-25 13:28:32 +00:00
8c5050848d
Update telemetry documentation now that telemetry_provider is gone.
...
Closes #670 .
2015-03-25 13:23:15 +00:00
497929816a
Merge pull request #652 from sherlockflight/docs
...
Add building instructions for Mac OS X
2015-03-22 21:25:27 +00:00
472409e7e0
Merge pull request #659 from digitalentity/patch-1
...
Update GPS tested hardware
2015-03-22 21:23:24 +00:00
1ca00bdb9e
Adding developer docs regarding configuration storage.
2015-03-22 09:41:37 +00:00
ec6df122cc
Update GPS tested hardware
...
Added a GPS receiver I verified to be working with CF on my quad
2015-03-22 09:19:08 +10:00
78b8f8908d
Added detailed steps for firmware flashing
2015-03-21 19:03:18 +01:00
31616dd010
Merge pull request #655 from skyflyer/master
...
References cleanflight/cleanflight#631 - revised docs
2015-03-21 14:29:15 +00:00
23908f9dd4
Add building instructions for Mac OS X
2015-03-21 19:12:47 +13:00
8b3a5dbb73
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-19 21:17:56 +00:00
a94d73ad3b
Typo fix for rate export commands in cli.md
2015-03-19 20:50:30 +00:00
aedb666909
References cleanflight/cleanflight#631 - added feature FAILSAFE and spellchecked
2015-03-19 09:47:50 +01:00
934adfc613
Merge remote-tracking branch 'cleanflight/master' into docs
2015-03-15 19:55:13 -04:00
0f3c4afcc4
Add note on passthrough mode
2015-03-15 17:11:49 +13:00
f6ef4273b4
Markdown touchups
2015-03-14 23:50:32 -04:00
4baec3eed2
Wrap ASCII board in code block to correct display formatting
2015-03-14 23:46:51 -04:00
1747f621d4
Better formatting and more verbose
2015-03-14 23:31:34 -04:00
c38611191d
Add 5V pad warning, and configurator setting.
2015-03-14 23:21:05 -04:00
ae83189085
Board recovery documentation.
2015-03-14 21:34:34 -04:00
0e2356bf00
Updating failsafe documentation.
2015-03-14 22:14:39 +01:00
9b092a841b
Merge pull request #621 from OpCode1300/docs
...
GPS support and hardware split
2015-03-14 21:20:51 +01:00
4cf6fe6571
Rename 'frsky_hiprec_vfas' to 'frsky_vfas_precision' and introduce enum
...
for FRSKY_VFAS_PRECISION_LOW and FRSKY_VFAS_PRECISION_HIGH.
Improves naming for humans. 'hiprec' was meaningless and
untranslatable. See
https://cleancoders.com/episode/clean-code-episode-2/show
2015-03-13 23:49:24 +01:00
d82fc6b9be
Merge pull request #477 from projectkk2glider/projectkk2glider/issue_316_frsky_voltages
...
Fixes #316 : better arithmetics for FrSky CELL voltages, VFAS battery vol...
2015-03-13 23:40:24 +01:00
626bd29dae
Merge pull request #592 from sherlockflight/blackbox-serial-baud
...
Support new 230400 baud rate which allows >750Hz Blackbox logging
2015-03-13 23:24:57 +01:00
ecc6645783
CC3D - Adding instructions on how to restore the OpenPilot bootloader
...
via JLink.
2015-03-13 23:06:27 +01:00
028d616169
GPS support and hardware split
...
Moved supported hardware to new doc. Added support for Ublox Neo-M8N
2015-03-13 14:06:20 -04:00
764b1ecc18
Merge pull request #576 from tracernz/vcm-doc
...
Fix error in VCM docs
2015-03-11 20:19:09 +01:00
bf95cbcaf4
Merge pull request #602 from dkisselev/patch-1
...
Fix default value on updated pid_at_main_throttle
2015-03-11 20:17:29 +01:00
f62b5c883d
Merge pull request #601 from tricopterY/tricopterY-patch-1
...
Update serial_msp.c
2015-03-11 20:15:24 +01:00
3a0a4e70f9
Merge pull request #608 from icdark/patch-1
...
Fix typo in "PID tuning.md"
2015-03-11 20:11:04 +01:00
036fa9c049
Added custom mixer examples and documentation
2015-03-11 14:20:45 -04:00
eccdca9262
Merge remote-tracking branch 'remotes/cleanflight/master'
2015-03-11 14:04:12 -04:00
e1be456b3c
Fix typo in "PID tuning.md"
2015-03-11 12:36:54 +01:00
cee021706b
Merge remote-tracking branch 'upstream/master' into blackbox-serial-baud
2015-03-11 13:31:30 +13:00
1eae5e3ac3
Fix default value on updated pid_at_main_throttle
...
The code was updated changing the default to 1 with the last commit but that change was not reflected here
2015-03-09 19:25:38 -07:00
44b36107a6
Documenting the ID's used for modes by the CLI.
...
See #509 , #510 , #518
2015-03-09 23:41:08 +00:00
fe47223453
Merge pull request #2 from cleanflight/master
...
Update from Original
2015-03-10 10:11:07 +11:00
ed434fe47b
Use a positive named setting and variable instead of a negative one to
...
simplify the logic and aid understanding.
2015-03-09 22:50:27 +00:00
acabbf41db
Previously, at minimum throttle, the quad would do absolutely no self-leveling
...
and simply run the motors at constant minthrottle. This allowed the chance
for the quad to lose control during flight if the throttle was set to minimum,
say, to drop from a high altitude to a lower one.
With this edit, the quad will still self-level at minimum throttle when armed,
allowing for safe decents from altitude. To prevent motors spinning when
arming/disarming, the yaw input is ignored if the throttle is at minimum and
we're using the sticks to arm/disarm.
Conflicts:
src/main/flight/mixer.c
2015-03-09 23:44:53 +01:00
517d38c94f
Re #316 : Battery voltage calculation converted to integer arithmetic, unit tests updated to account for proper rounding of voltage
...
Added frsky_hiprec_vfas configuration option that selects how VFAS is sent
Better arithmetics for FrSky CELL voltages, VFAS battery voltage send with other ID that allows 0.1V resolution
2015-03-09 20:43:04 +01:00
Moshen Chan
Nicholas Sherlock
Dominic Clifton
Konstantin Sharlaimov
Chris Mavrakis
Mark Williams
Miha Valencic
Administrator
tracernz
Brnadon Miller
icdark
Denis Kisselev
tricopterY
Damjan Adamic