Benjamin Vedder
76fd7a3917
Added COMM_SET_CAN_MODE and added support for HW75_300_R3
2020-04-04 22:28:41 +02:00
Benjamin Vedder
450ed15837
Some Fixes in prevoius PR
2020-04-02 16:26:59 +02:00
Jeffrey M. Friesen
f7964e20c2
Few small changes and fixed bug with duals
...
Added ramping to current measurement to avoid steps during current calibration with an un-tuned current controller.
Added terminal command for mapping to internal nrf pins, useful when you want to erase_mass a locked nrf chip and dont want to cycle between a bunch of windows to scan connect etc.
Made fault led on duals blink if motor 2 is faulting.
Added break on inductance measurement if motor faults.
Added placeholder commands for changing name and pin of BLE module.
2020-04-01 17:58:37 -07:00
Benjamin Vedder
76c7575bb9
Fixed merge conflict
2020-03-26 13:52:40 +01:00
Benjamin Vedder
731ac70e55
Fixed typo in previous commit
2020-03-26 13:51:20 +01:00
Benjamin Vedder
3a03286f00
Fixed merge conflict
2020-03-26 13:47:48 +01:00
Benjamin Vedder
5e93fa9f81
Fixed warning on previous commit
2020-03-26 13:45:39 +01:00
Benjamin Vedder
cf0031ee17
Fixed merge conflicts
2020-03-26 13:37:15 +01:00
Benjamin Vedder
3129420e43
Updated COMM_SET_MCCONF_TEMP to allow setting input current limits
2020-03-26 13:30:53 +01:00
Benjamin Vedder
988dfd4e72
Added new_app_offset to COMM_WRITE_NEW_APP_DATA reply
2020-03-22 18:21:53 +01:00
Benjamin Vedder
51f0fcea09
gpdrive fix, observer gain calc updates, added COMM_SET_BATTERY_CUT, added CAN_PACKET_SHUTDOWN, detect all fix
2020-03-20 17:35:25 +01:00
Benjamin Vedder
7391330f4c
Added test build flag
2020-03-17 11:46:52 +01:00
Benjamin Vedder
52e17059e5
Major restructuring for dual motor support, and added unity hw files
2020-03-16 18:32:39 +01:00
Mitch Lustig
6d29b6741f
Use ADC for switches
2020-02-23 13:34:51 -08:00
Benjamin Vedder
97ef43cff8
Leave debug mode on NRF5x after SWD upload, more TS5700N8501 encoder features, more CAN baud rates
2020-02-01 00:37:25 +01:00
Benjamin Vedder
b6949d60dc
FW4.00: HFI and many updates, see changelog
2020-01-28 19:46:19 +01:00
Benjamin Vedder
ceb8b7bf7d
HW60_MK3 support, shutdown fix, added COMM_SET_CURRENT_REL, ramp fix, PPM timeout fix, IRQ prio fix
2019-12-19 16:55:38 +01:00
Benjamin Vedder
23e61925b6
FW upload compression support, TS5700N8501 support
2019-12-05 19:50:17 +01:00
Benjamin Vedder
ce31092c1d
Merge branch 'master' of https://github.com/vedderb/bldc
2019-09-21 12:50:41 +02:00
Benjamin Vedder
f34d0159bf
Fixed nunchuk bug and added COMM_BM_MEM_READ command
2019-09-21 12:50:39 +02:00
Mitch Lustig
343dba369a
Remove axis config
2019-09-21 01:07:31 -07:00
Benjamin Vedder
6117c2ba20
Fixed merge conflict
2019-09-17 19:43:28 +02:00
Benjamin Vedder
db6ba047d9
Added COMM_BM_READ_MEM command
2019-09-17 19:39:11 +02:00
Mitch Lustig
67a4653bd8
Add support for dual fault switches
2019-09-10 01:07:05 -07:00
Mitch Lustig
a4de5eb2b5
Cleanup
2019-09-08 22:23:31 -07:00
Mitch Lustig
011d3055f6
Merge branch 'master' into merge_new_master
2019-09-08 15:05:54 -07:00
Mitch Lustig
98652977a2
Merge master
2019-09-08 11:42:28 -07:00
Benjamin Vedder
a233367be8
MPU9x50 fix, experiment plots, DQ voltage RT data, smart reverse for nunchuk app
2019-09-08 18:25:38 +02:00
Benjamin Vedder
602db7435b
FW3.59. Many updates, see changelog for details
2019-09-03 20:39:05 +02:00
Mitch Lustig
7cd25a1252
Send app state
2019-08-09 20:55:58 -07:00
Mitch Lustig
14faa2e593
Make all features configurable
2019-08-07 00:22:51 -07:00
Mitch Lustig
800115f683
Implement more data to help debug
2019-07-30 00:27:23 -07:00
Mitch Lustig
bbba718140
Work to get GUI going
2019-07-29 00:31:48 -07:00
Benjamin Vedder
a141e750bb
Added CAN status msg 5, fixed issue 94, use defaul HW parameters after autodetect
2019-05-16 23:30:40 +02:00
Benjamin Vedder
1161f8417c
Added SWD programming support (based on Black Magic Probe) and open loop duty cycle control
2019-03-31 10:49:18 +02:00
Benjamin Vedder
39bb8a6b09
FW 3.53: Limit foc_current_filter_const range, 1Mbit/de NRF speed, lower detect f_sw for resistance, no temp_comp by default
2019-03-20 22:46:36 +01:00
Benjamin Vedder
65298263b6
75/300 R2 support, terminal sync cmd, IMU support, option to disable permanent UART, collected timer functions in one place
2019-03-10 14:57:42 +01:00
Benjamin Vedder
0db2f200f6
Updated some comments in commands to make it easier to follow
2019-03-05 07:33:31 +01:00
Benjamin Vedder
aa13c3b345
Fixed build with servo out enabled, added prebuild firmwares
2019-03-04 19:29:05 +01:00
Benjamin Vedder
35c1c72ab4
Commands restructuring for thread safety, 75/300 vreg fix, fixed relative current commands
2019-03-04 19:23:38 +01:00
Benjamin Vedder
01e72eb555
Autogenerated config parsing with signatures, fixed previous PRs
2019-03-01 21:36:58 +01:00
Benjamin Vedder
c76942009b
Some fixes after the merge
2019-02-19 18:55:18 +01:00
Marcos Chaparro
32cf05629d
Resolve merge conficts with major 2019 release
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-02-18 20:25:52 -03:00
Benjamin Vedder
123bb00ab4
Major 2019 update
2019-02-18 19:30:19 +01:00
Marcos Chaparro
fa9ed8dc55
Clearerr way to limit FOC loop frequency.
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-01-29 16:05:47 -03:00
Marcos Chaparro
69bdc73536
Put a safe limit on ADC ISR frequency to avoid kernel panics. Currently ADC ISR duration is around 26usec, it can not be executed at more than 38kHz
...
Signed-off-by: Marcos Chaparro <mchaparro@powerdesigns.ca>
2019-01-26 02:36:12 -03:00
Benjamin Vedder
43c3bbaf91
FW 3.40: Added vesc id to mc_values
2018-07-23 15:43:58 +02:00
Benjamin Vedder
a20c35b338
FW 3.39: AUX pin support, some refactoring
2018-07-06 21:20:54 +02:00
Benjamin Vedder
22dc2ce33c
FW 3.37: FOC KI temp comp, configurable foc current filter
2018-03-24 22:32:58 +01:00
Benjamin Vedder
bf27cb673e
Removed software servo driver, fixed hw servo driver to work with all hardwares
2018-02-28 10:22:25 +01:00
Benjamin Vedder
5a189290bc
FW 3.34: PID POS in values, inverted direction angle normalization, relative current mode in APP_ADC
2018-01-24 09:39:06 +01:00
Benjamin Vedder
5348662197
FW 3.32: Configurable CAN baud rate
2017-11-08 14:07:35 +01:00
Benjamin Vedder
6277cf74ca
FW 3.31: Acc temp dec option, PID for APP_ADC
2017-10-27 21:29:12 +02:00
Benjamin Vedder
79bfbe6234
FW3.28: dual throttle curves, ntc beta factor config, board file added
2017-09-06 21:13:28 +02:00
Benjamin Vedder
f141157358
First official commit after the VESC Project release
2017-09-04 21:12:43 +02:00
Benjamin Vedder
bb2bfa3b9c
FW 3.9: Final float serialization update, new option to invert motor direction, UUID readout
2016-11-06 18:14:06 +01:00
Benjamin Vedder
5dbc94c525
FW 3.7
2016-11-04 15:18:34 +01:00
Benjamin Vedder
e027ad476c
Merge branch 'master' of https://github.com/vedderb/bldc
2016-06-27 17:29:13 +02:00
Benjamin Vedder
d2f6d87560
FW 3.0: HW60 support, 3 low/high side shunt support, permanent NRF option
2016-06-27 17:29:09 +02:00
James Churchill
fbfc442b43
Fix incorrect scaling of cc_ramp_step_max parameter
2016-06-27 23:06:32 +10:00
Benjamin Vedder
cb2a205cb8
FW 2.17: as5047 support, change sensor port mode in conf, better encoder detection, FOC ah and wh counter fixes
2016-04-27 15:32:32 +02:00
Benjamin Vedder
08a27cfbbd
FW 1.16: Hall sensor position control, brake at 0RPM setpoint in FOC, FOC parameter detection fix
2016-02-24 21:19:44 +01:00
Benjamin Vedder
d52906fbe8
FW 2.15: NRF configuration, PPM and ADC app duty mode scaling to max duty
2016-02-09 12:25:13 +01:00
Lucas Pleß
294d80b777
added ADC2 analog brake option
2016-02-02 16:28:55 +01:00
Benjamin Vedder
02f140e335
FW 2.11: Refactoring, dead time comp fix for smoother braking when the speed is zero
2016-01-30 15:57:51 +01:00
Benjamin Vedder
e6ea308a48
FW 2.10: FOC hybrid hall sensor support with interpolation
2016-01-27 23:57:23 +01:00
Benjamin Vedder
90986c31de
FW 2.9: NRF updates (nunchuk has to be updated too), nunchuk command, small can fix, custom app data command
2016-01-24 13:44:51 +01:00
Benjamin Vedder
42c1b79a08
FW 2.7: Better encoder support, small UART and CAN fixes, NRF commands preparation
2015-12-28 01:50:23 +01:00
Benjamin Vedder
d995cf6749
FW 2.6: Slow abs current fix, current limit fix, FOC control CPU resource measurement, current filters, D current injection fix
2015-12-24 00:43:31 +01:00
Benjamin Vedder
ff090fd4e0
FW 2.3: MAJOR UPDATE: FOC!!
2015-12-08 21:01:23 +01:00
Benjamin Vedder
c4ff81e849
Ported to ChibiOS 3, refactoring, cleanup, added safe start delay after fault for PPM app, removed unused ST libraries
2015-10-08 23:09:39 +02:00
Benjamin Vedder
06129bb66c
FW 1.13: Hw 4.8 support, new CC implementation for nunchuk, refactoring, custom app and hw config support
2015-09-17 23:24:55 +02:00
Benjamin Vedder
c3e82f7651
Soft battery cutoff, more BLDC Tool parameters
2015-08-26 23:12:39 +02:00
Benjamin Vedder
58d892935d
PPM dec fix, current sampling updates, ADC cruise control, commutation fix, higher switching frequency, refactoring
2015-08-23 18:26:05 +02:00
Benjamin Vedder
f032111b9b
NRF updates, better servo output support
2015-07-31 23:26:50 +02:00
Benjamin Vedder
24380c3fc0
New hall sensor implementation with hybrid mode and connection/order auto detection
2015-06-19 23:38:46 +02:00
Benjamin Vedder
87932662b7
Long packet support, configurable min and max duty, longer CAN buffer, default parameter changes, appconf ack fix, refactoring
2015-05-20 16:13:48 +02:00
Benjamin Vedder
bc7a779632
Bootloader support, CAN fixes
2015-05-08 22:53:59 +02:00
Benjamin Vedder
5a5ccfb4c3
ADC app added, nunchuk RPM filter, FW version added, feedback on appconf and mcconf set
2015-05-04 23:25:43 +02:00
Benjamin Vedder
85f0073105
PPM updates and safe start implementation
2015-05-01 01:57:55 +02:00
Benjamin Vedder
607e99d211
Configuration over CAN, first implementation of position control, more configuration options
2015-04-27 00:02:32 +02:00
Benjamin Vedder
1ee40ce5ba
Median filter option for PPM input
2015-04-20 22:09:53 +02:00
Benjamin Vedder
bc0415c1bb
First implementation of DC motor support
2015-04-12 18:23:17 +02:00
Benjamin Vedder
828cdd92f8
Chuk and PPM config structs, phase advance fixes and implementation for delay comm mode, CAN fixes and status message implementation, multi-esc mode for PPM and Chuk, traction control for PPM and chuk, CAN id config, multi-esc and traction control config, ADC sampling change, hall-sensor read bug fix for HW45+
2015-02-19 21:20:07 +01:00
Benjamin Vedder
8dc8ffe2c7
Nunchuk ramping, ws2811 configurable pin (Requieres latest BLDC_Tool)
2014-12-20 12:52:38 +01:00
Benjamin Vedder
434cd04b86
Added max ERPM in CC mode parameter (NOTE: Requires latest BLDC_Tool)
2014-12-13 11:46:26 +01:00
Benjamin Vedder
bc4409ba14
Full brake current estimation (NOTE: Extra parameter added, so update BLDC_Tool)
2014-12-13 01:31:54 +01:00
Benjamin Vedder
33c81db930
Deadband fix, configurable temperature limit
2014-11-25 21:05:46 +01:00
Benjamin Vedder
7c7a315a81
Commutation fixes, timer update change, current measurement fix, fault logging in RAM, current limit fix
2014-10-24 23:04:10 +02:00
Benjamin Vedder
f7cda79d1b
HW45-implementation, temp-protection, nunchuk-fix, i2c-fixes
2014-10-19 19:31:06 +02:00
Benjamin Vedder
81a6d84113
Nunchuk implementation (Nyko Kama tested), mah and wh counting
2014-10-19 01:00:53 +02:00
Benjamin Vedder
ce3d1f9596
Currant sampling update, added fault code to mc values command
2014-10-16 17:52:29 +02:00
Benjamin Vedder
a5a8727eb2
Energy counters and timer update change
2014-10-16 09:42:26 +02:00
Benjamin Vedder
2119242b43
Soft RPM limit for current mode in ppm app
2014-09-21 19:29:26 +02:00
Benjamin Vedder
e27df0235f
Command to get decoded servo value
2014-09-20 15:23:36 +02:00
Benjamin Vedder
10bbe73206
Global timeout implementation
2014-09-20 13:41:18 +02:00
Benjamin Vedder
1d04f0314b
Added gpl to some files
2014-09-20 03:27:06 +02:00
Benjamin Vedder
d6beda7b47
Complete servo-decoding rewrite, common command module, full access to everything over uart, more ppm options
2014-09-20 03:22:38 +02:00