* expand toyota ACC_CONTROL signal and run generator
* wrong address
* add signal definition and run generator
* add more definitions and run generator
* run generator
* update signal def and run generator
1ce1b041fb068985|2021-10-25--17-57-01
* set_me_x3 makes no sense here
* add definition and run generator
* add radar dirty message
and fix some ugliness
* Bugfix in dbc CAN encoder
While encoding, we need to subtract the offset first before we apply the factor.
* Update dbc.py
* Forgot to add import for assert_almost_equal
* test against C++ can packer
* turn into unittest
Co-authored-by: Willem Melching <willem.melching@gmail.com>
* pcs_off_signal
* generate signals with generator
* PCS sensitivity value
* better signal name
* Update generator/toyota/_toyota_2017.dbc
* run generator
* remove extra and run generator again
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Follow Distance Button Signal Forwarded from sDSU
The sDSU forwards the signal from the follow distance button:
b5120f6427
* Move sDSU DBC to Comma File
* Stellantis: Initial WIP DBC
* add more SWCM signals
* ABS yaw rate and accels, auto high beam passthru
* fix STEER_ANGLE signal
* official Stellantis control module names
* Add PQ Braking and ACC led control CAN messages
mMotor_Bremse used to control braking on cars that don't support ACC.
mAWV used to control ACC led in dashboard.
* Update vw_golf_mk4.dbc
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
* Update vw_golf_mk4.dbc
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
* Update vw_golf_mk4.dbc
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
Co-authored-by: Jason Young <46612682+jyoung8607@users.noreply.github.com>
* Support checksum for extended IDs on 2021 Honda Bosch
Add 2021 Honda Accord Hybrid 2.0T Touring
Update can/common.cc
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
Yield a proper 4 bit value.
less space
Revert odyssey changes
Remove RDM signal def
Add new BRAKE_HOLD bits
- From route: 085ac1d942c35910|2021-05-08--17-44-16
Update can/common.cc
* just move to _bosch_2018
* delete that
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* Added High Voltage Management to powertrain file.
* Removed non high voltage items.
Added units.
* Fixed up cell voltages to be right.
Trying to decipher the rest of Pack_stats, charger_stats.
Added Charger command and parameters, Coolant_temp, AC_stats (needs scaling),
some unknown message that is either connection or charging indicator.
* Add messages for Chevy Volt APM 14V Power Modules on the Powertrain
expansion bus
* Add pack_current signal to BECM
* remove trailing whtiespace
* Fix 0x460 to decode inlet and outlet coolant temps correctly
* Charge stats signals corrected
* Fix BECM pack current scaling
Add charger mains and status decoding
* revert that
Co-authored-by: Adeeb Shihadeh <adeebshihadeh@gmail.com>
* add temp dbc with different gas pedal signal from xps
* add additional message to existing dbc
* split the two messages on the same address
* run generator
* actually we want a base dbc as well for ice cars
* add base generated
* we can use relative imports
* not autogenerated
* not autogenerated
* one dbc
* make Accel_Pedal_Pc a percent
* correctly scale
* correct scaling (both 8 bits)
* maximum is 254 for both
* add comment
* just do this in carstate, more precise
* Update comment