* auxout: manually fill pwm config
(cherry picked from commit a01876bc034264de5d6930bf2cc49cf0fc0cbb0a)
* auxout: some boards use primary PWM outputs instead of complementary
(cherry picked from commit c13b95441e7b284a36445c261199e96580e94ebd)
* auxout: implement ripple cancelation using inverted PWM
(cherry picked from commit 77cbc04990421b24021639b098ea6040af3a12f8)
* f1_common: default AUXOUT value is AFR voltage
with 'default' scaling 8.5 to 18.0 AFR is represented with 0.0 to
5.0V
(cherry picked from commit 0c62ab8f509ff0ab3ab4260e308ad4b55bd64e40)
---------
Co-authored-by: Andrey Gusakov <dron0gus@gmail.com>
* f1_rev3: high speed (strenght) for heater PWM output
* threads: set name for all thread
* f1_dual: enalbe CH_CFG_USE_REGISTRY so GDB can see thread
* f1_rev3: enalbe CH_CFG_USE_REGISTRY so GDB can see thread
* tunerstudio: support JDY33 BT module init on UART
* tunerstudio: BT: try most popular baudrates first
* tunerstudio: BT: protect from overflow
* tunerstudio: BT: limit retries
* tunerstudio: BT: directly do chprintf() to SD device
* TS: serial: make BT setup optional
* f1_dual, f1_rev3: use Serial for TS not for debug
* f1_dual: config cleanup
* EGT_CHANNELS is better option for optional compilation of max driver
* max31855: supress warning
* main: acctually call InitConfiguration()
* f1_rev2: enable EFL and MFS (Managed Flash Storate)
* f1_dual: enable EFL and MFS (Managed Flash Storate)
* f1 boards: extract common code
* port.h: add LoadDefaults() method to Configuration class
* f1 boards: store Configuration to MFS
* f1 boards: common getTsSignature() for all f1 boards
* TS top down
* TS top down
* TS top down
* TS top down
* Ts top down #104
removing the controversial part
* Ts top down #104
removing the controversial part
* docs
* fix build (switch to serial)
* f1_dual: UART->Serial
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
Co-authored-by: Andrey Gusakov <dron0gus@gmail.com>
* board: f1_dual: add way to measure battery through Heater-
* heater_control: allow board to limit max heater duty
* board: f1_dual: use max sample for battery measurement, filter
Co-authored-by: Andrey Gusakov <dron0gus@gmail.com>
* port: ID_SEL2_PIN is optional
Dual version is out of mcu pins and implement only one sel pin.
* board: f1_dial: add dual channel board
* GH actions: add f1_dual build to actions
* f1_dual: use uart driver, not serial
* f1_dual: setup correct remaps
* f1_dual: DEBUG: enable uart debug (disable TS)
* board: f1_dual: add way to measure battery through Heater-
* fix dual board
Co-authored-by: Andrey Gusakov <dron0gus@gmail.com>
rusefillc
Matthew Kennedy
Andrey G