fe69616859
etb_test_hw
2021-10-10 16:29:45 -04:00
bc4a068c9c
[DRAFT] IAC H-Bridge Microstepping ( #3213 )
...
* fix for stepperHbridgeHardware
* new config fields for microstepping
* add stepper dir pin mode to the dialog
* refactor stepper hw dialog & add microstepping panel
* microstepper modes enum
* stepperDcInvertedPins needed by Hellen
* add sleep() for stepper and divisor for pause()
* microstepping impl.
* make unit-tests more happy
* small progress
* fix etb-stepper dlg conflict
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-10-06 13:57:04 -04:00
d917cc8cc2
[DRAFT] Fix cranking->idling taper phase for useSeparate*ForIdle tables ( #3168 )
...
* Rename Phase::CrankToRunTaper -> CrankToIdleTaper
* Change isIdling() to isIdlingOrTaper()
* test_idle_controller.cpp
* useSeparateIdleTablesForCrankingTaper setting
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-10-06 12:05:20 -04:00
9797d25b7c
getOrZero ( #3319 )
2021-10-05 19:59:07 -04:00
16049a07e8
https://rusefi.com/forum/viewtopic.php?p=42468#p42468
2021-10-04 19:10:31 -04:00
4901a69d17
https://rusefi.com/forum/viewtopic.php?p=42468#p42468
2021-10-04 18:43:37 -04:00
8fabcd15ab
wow that was a bad setting name
2021-09-26 18:07:49 -04:00
235c932c71
Revert "Hellen Nissan defaults are no longer valid fix #3143"
...
This reverts commit 6ac7fc39
2021-09-14 15:51:58 -04:00
6ac7fc3940
Hellen Nissan defaults are no longer valid fix #3143
2021-09-14 15:46:21 -04:00
884532cb6f
boost debug fields ( #3228 )
2021-09-07 14:07:47 -04:00
8c9ff949fe
thank you Nik - dealing with false positive CUSTOM_OBD_LOW_FREQUENCY
2021-09-06 08:09:14 -04:00
0bdf334a8a
hysteresis for GPPWM #3222
2021-09-06 07:58:17 -04:00
43bdabeb0c
hysteresis for GPPWM #3222
2021-09-06 07:21:17 -04:00
36792f55b5
hysteresis for GPPWM #3222
2021-09-05 20:18:14 -04:00
58c2bf8930
hysteresis for GPPWM #3222
2021-09-05 20:16:57 -04:00
3ed50dbea7
SD-card log fields improvement (warning counter & last code) #3162
2021-09-05 14:43:35 -04:00
730b26d034
remove old vss implementation ( #3208 )
...
* dead vss
* remove
2021-08-28 01:39:55 -04:00
6407e74ae2
disable closed loop boost below MAP threshold ( #3206 )
...
* boost minimum map
* changelog
2021-08-27 17:54:08 -04:00
48a009fc33
Revert "Revert "memory savings ( #3195 )""
...
This reverts commit 0b3ef5f5
2021-08-27 06:18:05 -04:00
0b3ef5f553
Revert "memory savings ( #3195 )"
...
This reverts commit 52a24ee7
2021-08-27 02:32:31 -04:00
52a24ee773
memory savings ( #3195 )
...
* d
* dead code
* all your ram are belong to me
* turn off gpiochips we don't need
* save
* save by using the same file handle
* smaller stack ok
* these can be on the stack
* this is closer
* what about ccm?
* probing available
* now probe ccm
* ccm
* put stuff in ccm
* fsio
* memory usage
* memory
2021-08-26 23:05:31 +03:00
50889671c0
fix ETB PWM ( #2870 )
...
* iwpm
* dc motor has configure
* consume
* format
* use fake PWM to save one SimplePwm instance
* comments
* not sure why I changed that
* init the pins otherwise
* typo
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-08-19 08:33:33 +03:00
68e2b93dff
don't print the wrong number ( #3158 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-08-15 02:10:28 -04:00
2ad4a9df1e
actually remove FSIO idle stuff ( #3150 )
...
* debug mode
* pid cleanup
* more dead
* more dead
* wow more dead
* much dead many death wow
2021-08-14 09:48:45 +03:00
e445d9724e
dead idle FSIO
2021-08-14 01:48:03 -04:00
7ebebd6922
Begin "vehicleSpeed" refactoring. Module switched to "FunctionalPointerSensor" class. #3106 #3107 #3108 . ( #3132 )
...
* Add new sensor type "VehicleSpeed"
* Add "Vehicle speed" sensor to name list
* Add Vehicle speed sensor initialization with function pointer sensor.
* Add init_vehicle_speed_sensor.cpp to Makefile
* Replace dependencies from "getVehicleSpeed" to OOP-like "Sensor::get()"
* Add warning and TODO to "mock vehicle speed" call
* Replace get & mock "VehicleSpeed" methods in tests
* Remove #warning directive (cause error by current settings)
* Remove stray tab
* Remove explicitly type casting.
* Add "InitVehicleSpeedSensor" function declaration to init.h
* Add "VehicleSpeedSensor" initialization call into "InitNewSensors"
Co-authored-by: alxrMironov <330OMcorporative>
2021-08-12 22:16:51 +03:00
90a0e47b04
skip etb init if no primary sensor ( #3136 )
...
* skip init if no primary sensor
* specific test
2021-08-12 00:45:44 +03:00
d24f1462e2
even more pch ( #3112 )
...
* s
* more
* s
* f7
2021-08-04 19:30:52 -04:00
25414ebdad
yet more pch ( #3068 )
...
* big pch energy
* put back ramdisk stub
* tests are happy
* h743 nucleo
* kinetis
* I love deleting code!
* make stepper happy
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-08-03 22:05:01 -04:00
a8eddbccf6
perform extra-step-prevention in the stepper driver itself ( #3038 )
...
* perform extra-step-prevention in the stepper driver itself
* isBusy flag
* I am unable to type
* the court of public opinion has decided that greater-equal is correct
* that sets target in steps, not percent
* correct var name
* mock stepper motor
* testable stepper
* build is happy
* helping build
2021-08-02 07:03:57 -04:00
511b5c22dd
unit test for vehicle_speed.cpp #3081
2021-08-01 12:09:53 -04:00
ab49f61a83
gppwm vbatt axis ( #3088 )
2021-07-31 21:20:19 -04:00
c6dbd9caf7
121 vag defaults have fatal error fix #3059
2021-07-26 16:40:11 -04:00
b52d50bbf2
Use pch in lots of files ( #3066 )
...
* most engine.h
* most engine_configuration
* more
* more
* more
* more
* more
* moooooore
* ok I'm done for now
* oops
2021-07-26 01:05:17 -04:00
eaeade5305
Clutch switch inverted options do not invert detected pedal position
...
#3044
2021-07-24 18:59:00 -04:00
37247db383
Clutch switch inverted options do not invert detected pedal position
...
#3044
2021-07-24 18:44:13 -04:00
617c2886d9
adjust taper behavior ( #3051 )
...
* adjust taper behavior
* check that taper works in running state too
2021-07-24 16:12:07 -04:00
ca34562d5d
Clutch switch inverted options do not invert detected pedal position #3044
2021-07-24 15:54:51 -04:00
9c166d86fe
Clutch switch inverted options do not invert detected pedal position #3044
2021-07-24 15:36:03 -04:00
4ae72f43f6
"prettyClose": some strange code inside idle controller? #3030
2021-07-22 15:30:32 -04:00
2ce7777865
don't require EXTERN_ENGINE in every file ( #2969 )
...
* move enginePins
* no more extern engine
* uses
* more
* extern config too
* put this where it belongs
* include correct header
* merge
2021-07-16 18:13:33 -04:00
a926357a01
making code more testable
2021-07-14 22:37:05 -04:00
5e08907590
knock sensing peak detect ( #2910 )
...
* knock peak detect
* comments
* comment
* initialize
* test
* fix warnings while we're here
* those are functions, not values
* ram
2021-07-06 21:44:59 -04:00
aabdea4140
Option to log VVT target #2913
2021-07-06 20:00:53 -04:00
5bd3ae3aaa
Disable closed loop idle during cranking->running taper ( #2900 )
...
* implement
* dead file?
* implement tests
* new phase
2021-07-06 08:47:06 -04:00
007a390f2b
Gate closed loop idle on road speed ( #2901 )
...
* implement
* test
* b
* config
2021-07-04 09:35:12 -04:00
1bca4843fe
test dc_motor.cpp ( #2890 )
...
* use ipwm where possible
* mock ipwm
* initialize
* test
2021-07-01 09:21:18 -04:00
32f5ce6fb4
no fan if stopped engine ( #2822 )
...
* no fan if stopped engine
* config
* use config
* more tests
* merge
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-06-28 08:52:54 -04:00
cd5eb6a77c
Move AC logic out of FSIO ( #2872 )
...
* new impl
* remove fsio
* inject "is ac active" to fan
* include the correct code
* include
* test
* more AC features
* AC switch vs. actual AC indicators
* include
* duh
2021-06-27 18:51:34 -04:00
cd055a687d
dc motor api ( #2869 )
...
* iwpm
* dc motor has configure
* consume
* format
* spelling
2021-06-26 21:42:40 -04:00
2475cb283b
warnings ( #2862 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-06-25 20:58:38 -04:00
93adb8ea76
Etb rev limit ( #2820 )
...
* cfg
* impl
* a test
* don't break the ts channel
* text
2021-06-16 08:44:48 -04:00
a4973a6f3d
fan/AC idle improvements ( #2818 )
...
* fan 2 open loop bump
* we had an AC target bump all this time?!
* format
* enable test
* I can't type
2021-06-15 17:30:35 -04:00
097bf85faf
dual fans ( #2806 )
...
* remove fsio
* hard code impl
* test it
* enable fan with AC
* make commented stuff match
* second fan config
* second fan ui
* defaults
* impl
2021-06-13 08:06:45 -04:00
15d172ab08
apply open loop idle when in automatic mode ( #2745 )
...
* always apply open loop in closed loop
* simplify flags
* comment
* move
* comment
* missed one
* config for fan bump
* adjust miata defaults
* test fan/ac open loop
* idle CL tests
* test coasting
* test integration case
* fix merge
* put back reset logic for now
* s
* don't need that part
* I guess use OL as baseIdlePosition
* reset condition
2021-06-12 14:21:11 -04:00
c27549b2e8
hard coded fan logic ( #2805 )
...
* remove fsio
* hard code impl
* test it
* enable fan with AC
* make commented stuff match
2021-06-11 06:25:12 -04:00
24131cdc0e
s/controlPin1/controlPin/
2021-06-05 16:19:01 -04:00
3ef969d743
warnings & assorted cleanup ( #2793 )
...
* lua hook
* validateBuffer
* tables
* simplify fsio table
* test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-06-03 14:30:25 -04:00
981e8f5047
defaults cleanup: base engine & fuel ( #2790 )
...
* build
* fuel and base
* fix build
* cleanup
* extern
* tps/tps
* alternator
* tps
* iat timing
* cranking RPM
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-06-03 00:50:07 +03:00
f3c5ff6d54
idle fan/AC open loop bump ( #2785 )
...
* idle open loop ui section
* idle bump logic
* test fan/ac bump
2021-06-01 00:45:04 +03:00
39e4f70405
iac coast table ( #2784 )
2021-06-01 00:43:58 +03:00
7d773bfb1d
make the implementation match what the UI claims ( #2779 )
2021-05-31 07:37:02 -04:00
a50f8e0077
Idle test that fails ( #2781 )
...
* make member func
* failing test
2021-05-31 06:18:15 -04:00
d2f7e96747
code style ( #2780 )
2021-05-31 06:01:57 -04:00
ec8e1eee69
require redundant pedal ( #2758 )
...
* require redundant pedal
* return false
* I don't typing good
* tests
* tests
2021-05-30 19:19:57 -04:00
58b274c80c
safe boost duty ( #2764 )
2021-05-30 14:04:04 +03:00
2667810942
add pedal to gppwm ( #2748 )
...
* add pedal to gppwm
* string
2021-05-28 03:38:45 -04:00
13d2ee03bc
idle indicators ( #2692 )
...
* add coasting bit
* remove useless bit
2021-05-13 17:35:00 -04:00
dd6105cfa3
shrink canned tables ( #2651 )
...
* helper
* use it miata
* do type safe copy
* miata vvt
* etb
* default iat correction
* magic is afoot here
* hunchback
* misc
* neon
* neon
* aspire
* citroen
* neon
* missed one
* dead
* festiva
* remove andreyism
* very dead
* no need for copy of that function
* cleanup
2021-05-09 14:37:16 -04:00
8b30776016
remove stateChangeCallback from simplepwm ( #2644 )
...
* remove callback parameter from cj125
* remove from ext
* remove stateChangeCallback
* alt doesn't need that
* demorgan
* remove call
* bad cut/paste
* check the actual pin in the test
2021-05-07 09:38:41 -04:00
ca7308e910
move some stuff in to ccm ( #2645 )
...
* stuff in ccm
* used memory
2021-05-07 09:35:57 -04:00
c26987b96b
Destroy all shared logger ( #2574 )
...
* most of shared logger
* a few more
* one more
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 14:28:48 -04:00
ad71016862
rip the bandaid: find-replace most of scheduleMsg ( #2572 )
...
* biiiig find replace
* more trivial find replace
* pwm
* almost all of them
* few more
* gpio
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-21 12:53:13 -04:00
bd1c84fa62
Logging remove 3 ( #2568 )
...
* ts logger
* sensors
* wideband too
* missed one
* init
* motors, pid, etc
* vvt
* more
* idle
* missed one
* dynoview
* launch
* can
* console IO
* s
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-20 14:09:41 -04:00
5145ee4b62
logging cleanup 2: sensors, pid, etb, etc ( #2567 )
...
* ts logger
* sensors
* wideband too
* missed one
* init
* motors, pid, etc
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-18 20:02:32 -04:00
15a8dab795
gppwm zero option ( #2557 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-04-15 01:08:34 -04:00
f05b8ba675
More gppwm and fsio ( #2509 )
...
* gppwm aux temp
* fsio fuel flow rate and oil pressure
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-29 08:57:37 -04:00
1c473934b9
plumbing for multiple vvt ( #2488 )
...
* plumb multiple vvt
* fix test
* s
* fix barra while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-25 07:39:23 -04:00
3072d54717
dead code, warnings ( #2461 )
2021-03-15 10:23:19 -04:00
a9c8b39dac
set 50% target for ETB autotune ( #2459 )
...
* 50% target for autotne
* pass target in
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-15 08:54:55 -04:00
1dd2180f76
VVT uses closed loop controller framework ( #2453 )
...
* vvt uses framework
* builds
* rename, update headers
* s
* testable
* write some basic tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-14 19:31:46 -04:00
428aaca5c5
ETB uses error accumulator ( #2435 )
...
* error accumulator
* makefile
* accumulate ETB error
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-08 19:18:35 -05:00
3d17e62d65
finish off vbatt -> sensor model ( #2433 )
...
* more vbatt
* s
* goodbye voltage
* makefile
* apparently that part was in use
* include
* mocking
2021-03-07 20:18:32 -05:00
b1873b3d8b
set all thread priorities in the same place ( #2412 )
...
* unify thread priority
* header
* mmc
2021-02-28 07:30:45 -05:00
02a49de390
aux to vvt rename
2021-02-17 08:53:39 -05:00
4a1d3de9a6
remove unused msg parameter ( #2360 )
...
* dead parameter
* last few
2021-02-16 09:32:16 -05:00
d87a38541e
M62T vanos support #2243
2021-02-10 21:44:21 -05:00
6416929fbd
M62T vanos support #2243
2021-02-10 19:51:14 -05:00
6f065274e4
aux pid is now VVT
2021-02-10 12:41:38 -05:00
870857df36
add option to disable ETB if engine not spinning ( #2280 )
...
* config/ui
* trigger central mods
* implement
2021-02-05 17:19:57 -06:00
7bd3979595
eliminate idle's custom applyPinState ( #2273 )
...
* remove
* not static
2021-02-04 17:04:37 -05:00
9f0ebaac49
Proteus analog input ci ( #2271 )
...
* test vbatt
* test proteus vbatt
* tolerance
* these don't work on proteus
* new engine type
* test analog input
* more test points, less tolerance
* console build needs this file generated
* only include for hw ci builds
* wiring info
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-02-03 13:34:48 -06:00
449ff446e2
https://github.com/rusefi/rusefi/issues/2274
2021-02-03 11:37:47 -05:00
9151b0c6c1
fix #2269 ( #2272 )
...
* fix #2269
* cleanup
2021-02-03 08:04:22 -06:00
fa30efbc94
boost fixes ( #2230 )
...
* fix boost pin reinit
* call boost from periodic slow
* ui
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-18 07:04:14 -05:00
bdacda558c
fix instant rpm ( #2180 )
...
* consumers
* impl
* instant rpm in idle timing
2021-01-14 20:45:55 -05:00
868f0d47ac
Enable idle timing/ve tables based on idle phase logic ( #2213 )
...
* add helper
* advance
* ve
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-11 00:54:37 -05:00
2af32084f4
gpio helper ( #2195 )
...
* gpios: isBrainPinValid helper
* LCD HD44780: do not touch pins if DM_NONE or invalid gpio
* Fix isEnabled checks for GPS and Joystick
* LCD HD44780: writePad use this method wider
2021-01-08 20:01:26 -05:00
7a90692187
Idle timing uses phase logic, remove falloff ( #2169 )
...
* use phase computation
* move & simplify implementation
* test
* bad merge
* initialize
* wonderful changelog
* now unused parameter
* put back deadzone
* ui
* test deadzone
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-01-07 08:06:36 -05:00
46583b2a19
Revert "Idle timing PID uses phase logic ( #2156 )"
...
This reverts commit 9634a803
2020-12-31 12:22:54 -05:00
acdf6fdc85
Put map in the sensor model ( #2161 )
...
* hook up map
* check for init
* switch some consumers
* don't do limp for now
* oops
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-30 08:43:49 -05:00
342414a5f7
show when idle is closed loop ( #2160 )
...
* show when idle is closed loop
* semicolon
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-30 08:42:40 -05:00
9634a803f1
Idle timing PID uses phase logic ( #2156 )
...
* use phase computation
* move & simplify implementation
* test
* bad merge
* initialize
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-29 23:50:56 -05:00
c8ee9fcf3f
use phase computation ( #2152 )
2020-12-29 07:49:10 -05:00
1d4ccfff3f
add idle timing defaults ( #2155 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-29 07:47:18 -05:00
ec508d8f9d
don't write settings if cal didn't work ( #2154 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-28 08:03:10 -05:00
64d9b4b71a
limp manager can disable etb ( #2143 )
...
* move rev limit to limp manager
* call fatal error
* include order
* fix bug
* tests
* limp can disable etb
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-26 21:47:27 -05:00
898b7a82e0
move swtiches out of idle ( #2148 )
2020-12-26 21:31:41 -05:00
4961a25ab4
start integratig ( #2147 )
2020-12-26 19:44:40 -05:00
b9e96322c5
Idle refactor open loop ( #2146 )
...
* impl
* typo
* tests
2020-12-26 19:34:42 -05:00
542cb6a420
more testable idle logic ( #2140 )
...
* header
* test
* impl
2020-12-26 08:32:01 -05:00
af6ad0757e
PROTEUS_QC_TEST_BOARD
2020-12-26 00:57:23 -05:00
6168bcea80
Fix gpio reinit race condition ( #2098 )
...
* fix unregister api for gpio
* consumers
* guard with a critical section
* index
* guard less
* unregister under lock
* fix reinit
* dead flag
* fix most tests
* initialize properly
* initialize properly
* assertions in tests
* fix message
* we must lock earlier to be truly safe
* this was using huge memory
* devirtualize
2020-12-18 17:18:12 -05:00
aeea50ada2
move target computation ( #2091 )
2020-12-17 17:46:51 -05:00
eb8b1ba325
docs
2020-12-17 16:59:02 -05:00
b3b5dfc398
fail fast!
2020-12-13 19:23:26 -05:00
bad0e6b949
require redundant TPS for ETB ( #2041 )
...
* Require redundant tps for ETB (#2037 )
* mod sensor api
* require redundancy
* fix tests
* check that it fails
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* add a test that fails but should not
* fix the bug
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-08 06:24:20 -05:00
2a1b585bfe
Revert "Revert "Split ETB in to interface + implementation headers ( #2040 )""
...
This reverts commit 4f4bb957
2020-12-07 01:27:27 -05:00
bb3cb0ba22
Revert "Require redundant tps for ETB ( #2037 )"
...
This reverts commit 4f1085a8
2020-12-07 01:11:32 -05:00
4f4bb95770
Revert "Split ETB in to interface + implementation headers ( #2040 )"
...
This reverts commit d9a82c09
2020-12-07 01:11:19 -05:00
d9a82c09af
Split ETB in to interface + implementation headers ( #2040 )
...
* split etb interface
* mocks
* fix master while we're at it
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-07 00:29:09 -05:00
4f1085a87a
Require redundant tps for ETB ( #2037 )
...
* mod sensor api
* require redundancy
* fix tests
* check that it fails
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-12-07 00:05:06 -05:00
2e8ae3ca94
refactoring
2020-12-06 19:04:23 -05:00
8739e192f5
basic hw in the loop - pwm self validation #2028
2020-12-06 18:39:50 -05:00
a5ba9d54dc
fix etb unit test idle hardware ( #1991 )
...
* move check to etb
* give it a sensor to read
2020-11-26 19:21:42 -05:00
d4d7e7583b
Starter is engaged on start-up in pull-up configuration #1969
2020-11-26 10:41:22 -05:00
750070a496
fix etb wastegate percent output ( #1988 )
...
* wastegate etb should use percent
* percent_t
* fix test
2020-11-25 21:14:06 -05:00
492498f8d0
Boost tolerance ( #1986 )
...
* tolerate invalid closed loop config when in open loop mode
* fix test
2020-11-25 07:27:24 -05:00
866038900f
adjust boost ( #1975 )
2020-11-22 18:30:19 -05:00
66687158c5
no feed forward for wastegate ( #1971 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-11-19 20:51:30 -05:00
ee7e1880a2
Something something unit test ETB does not work #1966
2020-11-18 20:12:58 -05:00
e29911114a
Starter seems to be engaged forever #1965
2020-11-18 20:01:02 -05:00
4c9c8d42bf
Starter seems to be engaged forever #1965
2020-11-18 19:51:51 -05:00
774de10f40
undo 1946 ( #1957 )
2020-11-17 17:07:56 -05:00
014cae25db
DC not ETB refactoring
2020-11-16 20:07:12 -05:00
cd7cefb669
DC not ETB refactoring
2020-11-16 20:05:35 -05:00
5ad36e655f
DC not ETB refactoring
2020-11-16 19:51:36 -05:00
2a3a2d7191
DC not ETB refactoring
2020-11-16 19:43:00 -05:00
724abc68f5
DC not ETB refactoring
2020-11-16 19:28:30 -05:00
2f4294ac4d
minor perf tweaks ( #1946 )
...
* only start PWM if needed
* put important stuff first
* use conversion
* this broke the logic
2020-11-16 00:06:11 -05:00
0e3673e78c
remove idle thread; just call from periodicSlowCallback ( #1924 )
...
* remove thread
* remove ui
2020-11-11 21:47:19 -05:00
d992bab241
Move all DECLARE_ENGINE_PTR etc to one place ( #1937 )
...
* restructure
* guard c++
* idle too
* status_loop.h
2020-11-11 19:06:04 -05:00
3241a43a2d
extract idle hardware to its own file ( #1923 )
...
* extract idle hardware
* should fix the build
2020-11-03 18:06:32 -05:00
2c322006d8
Output pin init/deinit needs a linked list #1803
2020-11-03 00:09:42 -05:00
6605877326
gppwm debug ( #1895 )
...
* dbg gppwm
* fix channel
* TS guard
2020-10-21 22:49:38 -04:00
9060aff46c
code style
2020-10-21 22:13:18 -04:00
2ce0bef9b9
refactoring
2020-10-19 22:44:44 -04:00
06f92807cc
second PID config for wastegate ( #1889 )
...
* remove
* cleanup
* implement ETB parts
* hook up to boost controller
* tests
* consume
* add cfg field
* ui maybe
* fix
* fix
* add wastegate config test
2020-10-19 08:04:27 -04:00
42bfad807b
Etb wastegate hookup ( #1888 )
...
* remove
* cleanup
* implement ETB parts
* hook up to boost controller
* tests
2020-10-18 21:57:04 -04:00
ee5d0bf07b
remove ( #1887 )
2020-10-18 20:49:42 -04:00
44653da2e5
Etb function cfg: actually read config ( #1884 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-18 17:26:38 -04:00
749282c807
more safe parts probably ( #1883 )
2020-10-15 22:04:42 -04:00
299a345c1c
etb function config 1 ( #1881 )
...
* this should all be safe...
* test fix
2020-10-14 22:02:09 -04:00
07a905b1fe
revering functional part of
...
Etb function cfg, try again #1860
try again from #1831
2020-10-08 17:09:00 -04:00
1bce3aa4c0
Etb function cfg, try again ( #1860 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-08 14:12:03 -04:00
367436454d
HW CI has failed 11 times since Oct 2 #1849
...
Revert "ETB function config (#1831 )"
This reverts commit af59c45a
2020-10-03 22:00:00 -04:00
af59c45adb
ETB function config ( #1831 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
* add config
* better spot for it
* use config init values
* handle null controller array
* fatal error testability
* test new init config
* defaults
* fix for default config
2020-10-02 20:51:02 -04:00
f1c04efefa
replace ETB index with function enum ( #1807 )
...
* two throttles one thread
* look at all this RAM!
* add enum
* switch from index to function
* test fixup
* improve init logic
* remove old vw idle mode bit
2020-09-28 16:33:07 -04:00
1fc55da3ca
two throttles one thread ( #1806 )
...
* two throttles one thread
* look at all this RAM!
2020-09-18 13:47:49 -04:00
eebded8caa
scale tables using type system ( #1776 )
...
* store scale in the type
* efi ratio
* boost control scaling
* fix boost tests
2020-09-10 18:44:10 -04:00
cb2173aad2
merge got confused
2020-09-07 15:05:47 -04:00
f33b3eda8a
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/algo/engine.h
# firmware/hw_layer/drivers/drivers.mk
# firmware/hw_layer/stepper.h
# firmware/integration/rusefi_config.txt
# firmware/tunerstudio/rusefi.input
# simulator/simulator/efifeatures.h
2020-09-07 15:02:11 -04:00
ec0d3a8eb2
Hellen says isIdleMotorBusy
...
(cherry picked from commit b24246791e
2020-09-07 14:43:29 -04:00
b24246791e
Hellen says isIdleMotorBusy
2020-09-07 14:12:21 -04:00
95798a5246
fix broken master, inject engine ptr to rpmcalculator ( #1759 )
...
* fix
* oops
2020-09-05 18:49:42 -04:00
675cce3854
less hacky testing implementation
2020-09-03 22:52:29 -04:00
ca21d5b4c2
refactoring
2020-09-03 19:29:15 -04:00
540eef5e0d
VVT support for VAG trigger #883
2020-08-25 00:59:07 -04:00
7a3b87656f
guard ( #1726 )
...
* implement
* add bench mode
* add ts cal mode
* TS impl
* include guard
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-08-23 23:46:33 -04:00
12bc5eb28b
Auto cal dual etb ( #1725 )
...
* implement
* add bench mode
* add ts cal mode
* TS impl
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-08-23 23:41:35 -04:00
225e403973
parameter names
2020-07-29 02:22:31 -07:00
b2db6b604d
Weird VAG: DC motor idle valve not ETB #1637
...
misc progress
2020-07-26 15:22:14 -04:00
a8f45d960a
Weird VAG: DC motor idle valve not ETB #1637
...
etbTarget gauge in DC idle mode
2020-07-26 15:07:45 -04:00
c649b05ebd
Weird VAG: DC motor idle valve not ETB #1637
...
should be better this way
2020-07-26 12:19:30 -04:00
3857607fc2
Weird VAG: DC motor idle valve not ETB
...
#1637
Seattle we might have a problem!
2020-07-26 12:03:36 -04:00
d5739815b4
Weird VAG: DC motor idle valve not ETB #1637
2020-07-26 10:54:51 -04:00
d1fde4fe93
make reality match the test
2020-07-26 03:15:17 -07:00
51a69c7478
clamp idle in VW mode
2020-07-26 03:05:59 -07:00
7003d6c7ba
implement
2020-07-26 02:55:35 -07:00
5e681cac1a
add new options
2020-07-23 02:51:08 -07:00
b7b50e5cb3
Idle PID improvements
2020-07-22 18:39:09 +03:00
5feb91dc8f
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 21:35:01 -04:00
f7da86983a
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 21:13:04 -04:00
0079e8d3f0
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 19:06:26 -04:00
13aef2dd77
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 18:25:48 -04:00
677d5888ed
EFI_IDLE_INCREMENTAL_PID_CIC should be a runtime parameter #806
2020-07-12 18:11:10 -04:00
8f4dd3e175
https://rusefi.com/forum/viewtopic.php?p=37401#p37401
2020-07-10 15:06:55 -04:00
29e3c71df4
https://rusefi.com/forum/viewtopic.php?p=37401#p37401
2020-07-10 14:19:51 -04:00
1f4c632cf2
https://rusefi.com/forum/viewtopic.php?p=37401#p37401
2020-07-10 14:03:07 -04:00
720ade2319
migrate amazing idle from FSIO to less opaque TS #1581
2020-07-08 01:12:08 -04:00
b1ab455f31
idle_min through FSIO not working as intended
...
#1553
we now re-activated idle PID even in deadzone for half a second after A/C toggle
2020-07-06 16:40:16 -04:00
26478ec394
Switch fueling to new axes ( #1574 )
...
* switch tables
* missed one
2020-07-05 18:14:55 -04:00
23e6ea5475
idle_min through FSIO not working as intended #1553
2020-07-04 22:01:12 -04:00
e854410778
idle_min through FSIO not working as intended #1553
...
better idle state logging
2020-07-01 19:10:42 -04:00
33eb2eab62
idle_min through FSIO not working as intended #1553
...
making logging less confusing
2020-07-01 16:37:25 -04:00
127dd67838
restoring ldmp
2020-06-17 19:03:10 -04:00
65625deb32
only setup etb if primary sensor configured instead of proxy ( #1489 )
...
* only setup etb if primary sensor configured instead of proxy
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-06-16 21:38:09 -04:00
b906d12268
Fix gppwm properly ( #1487 )
...
* directly control output in onoff mode
* test fixing
2020-06-11 20:43:26 -04:00
98e73987a3
docs
2020-06-01 08:50:54 -04:00
3a7c6f242b
Hardware pwm ( #1283 )
...
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-28 16:02:41 -04:00
a4329169e9
better file name
2020-05-25 13:02:05 -04:00
4f334c91d5
warnings ( #1462 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-21 01:08:07 -04:00
9dda1a21bc
Redundant tps ( #1427 )
...
* add redundant sensor
* add tests
* add configure, info printing
* tests
* tests
* partial hookup
* fix
* fix
* bad makefile merge
* use second TPS config
* update test
* update test
* sensor names
* set second pin by default
* fix auto cal
* auto cal both sensors
* add reconfigure of secondary sensors
* gobblin' up your ram
* slow down write a little bit
* put split in debug gauge
* s
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-18 14:32:00 -04:00
4364eea7a2
refactoring: extracting magic constant
2020-05-08 22:05:44 -04:00
b4f6c6488f
helping build
2020-05-08 21:39:35 -04:00
f78889c1b3
idle thread: debug output for bipolar stepper ( #1409 )
2020-05-08 20:05:05 -04:00
5987fb8b88
[SAFE] Debug cleanups ( #1403 )
...
* electronic throttle: inprove debug
* idle thread: show debug info for configured idle driver
* gpio-chips: make private functions static
2020-05-06 20:06:50 -04:00
74d13c391f
Rewrite boost control in new closed loop framework ( #1342 )
...
* rewrite boost
* test
* fix build
* tests
* open loop test
* test closed loop
* fix names
* typo
* tests
* mock boost setOutput
* needs more virtual
* fix boost logic
* switch to TPS based open loop
* fix test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 08:40:42 -04:00
20a95bdcf1
ETB auto-PID: auto set values in TS ( #1400 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* auto cal
* wire up bench testing
* auto gains too
* s
* fix
* rearrange a bit
* inject
* remove unused bit
* mock repair
* move
* add maintainconstantvalue
* add disable button
* cleaning
* move state inside
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 08:39:02 -04:00
3052f2ab7b
Support 4 h-bridges ( #1392 )
...
* update dc motor api
* add more etbio
* get out of two arrays
* hand generate enough
* forgot engine param
* ram
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-02 17:54:28 -04:00
965c06c079
https://github.com/rusefi/rusefi_documentation/issues/37
2020-04-29 18:41:40 -04:00
ba6ec4ac51
TPS Auto Calibration with ETB ( #1382 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* auto cal
* wire up bench testing
* s
* fix
* rearrange a bit
* inject
* remove unused bit
* mock repair
* guard for ECUs without ETB
2020-04-28 19:31:41 -04:00
d728b1ca48
Minor ETB improvements ( #1381 )
...
* fix pid reset and pedal failure
* pause control later
* test pauseEtbControl
* update tooltip + field name
* update test
2020-04-28 16:52:40 -04:00
44facf1140
useful content from Move ETB control to a thread #1374
2020-04-28 08:05:18 -04:00
fe4b531aeb
Move ETB control to a thread ( #1374 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* fix dt
* re-resize ram
2020-04-28 07:22:31 -04:00
1b84406e77
dead code
2020-04-26 17:40:12 -04:00
f128b33694
General purpose PWM: implementation & tests ( #1366 )
...
* config
* significant digits
* renumber enum, no need for a "none"
* ui
* impl base
* error handle MAP
* init & update
* don't need arg
* don't lie about sensor
* fix test build
* test stub
* initialize
* null check
* fix clamping
* test output
* types & enums
* don't need param
* test getOutput
* fix
* output pin instead of brain pin
* default config
2020-04-26 14:06:28 -04:00
df2db7036d
ETB autotune in its own function ( #1350 )
...
* pull out autotune
* oops
2020-04-22 22:22:28 -04:00
99489cff67
Improve ETB idle control ( #1319 )
...
* compress idle pos
* fix tests for new behavior
2020-04-20 17:29:03 -04:00
1a5e0a42f8
Inject idle to ETB ( #1335 )
...
* inject idle position
* pointer
* etb idle tests
* extract mocks
* ops
* test negative case too
* don't convert for etb
* guard
2020-04-20 16:26:35 -04:00
656331ebe9
reducing code duplication
2020-04-20 15:57:03 -04:00
e04008610a
ETB: inject pedal map ( #1334 )
...
* add clampf
* more tests
* public
* missed a mock
* fix output duty clamping
* do it that way
* more
* ah ha!
* test negative too
* clamp pedal
* inject pedal map
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-20 14:34:45 -04:00
934898f903
idle duty cycle clamping
2020-04-20 14:11:40 -04:00
0619575716
ETB testing: output, position clamping ( #1333 )
...
* add clampf
* more tests
* public
* missed a mock
* fix output duty clamping
* do it that way
* more
* ah ha!
* test negative too
* clamp pedal
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-20 13:52:20 -04:00
ad7c4f23bc
Better handling in case of ETB idle without ETB #1332
2020-04-19 23:55:27 -04:00
8aac233a5f
rewrite etb tests with gmock ( #1330 )
2020-04-19 20:32:41 -04:00
75b009bbae
Closed loop controller base & ETB testing ( #1322 )
...
* closed loop controller base
* etb tps test
* closed loop controller tests
* test support
* update gtest
* fix for change
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-19 17:18:47 -04:00
044766ec70
New clt consumers part 1 ( #1301 )
...
* idle
* CLT test prep
* idle target
* header
* air interpolate
* ancient comment
* fuel cut
* fuel cut, idle tests
* cleanup
2020-04-15 09:48:17 -04:00
6481b9df0a
filter ETB autotune results ( #1281 )
...
* Astrom-Hagglund
* enums
* comments
* dead
* fix
* changed enum
* ts guard
* safety
* etb autotune debug channels
* filter results
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-11 22:28:50 -04:00
b526b43864
etb autotune ( #1274 )
...
* Astrom-Hagglund
* enums
* comments
* dead
* fix
* changed enum
* ts guard
* safety
* etb autotune debug channels
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-11 22:15:49 -04:00
001ef27eb8
support ETB disable pin ( #1273 )
...
* config & hand gen
* board configs
* add dc motor support
* initialization
* also set duty to zero
* use disable in etb
* fix proteus default
* add TS fields
* I guess we needed 8 bytes
* :D
* comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-10 17:27:13 -04:00
9831c8c874
simplify ( #1275 )
2020-04-10 08:12:16 -04:00
00417b1040
idle: add two coil idle valve support ( #1271 )
2020-04-06 17:55:41 -04:00
345bf61bd5
Goodbye, old TPS ( #1266 )
...
* clear out tps
* boost control
* aux valves
* launch, aux valves
* unused field
2020-04-05 19:33:33 -04:00
7d5df29fbd
yet more tps consumers ( #1258 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
* engine load
* ve lookup
* unused
* oops we needed that
* oops needed that too
* mocking
* test mocks
* oops
* helps to use the right sensor
* and cylinder cleanup
* fuel math
* typo
* old tests
* kill dead stuff
* cleanup
* more
* fix
* test
* s
* fix signature
* fix test
* comment
* priming pulse
* remove mock tps
* remove more dead
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-05 09:11:25 -04:00
36477d348d
remove ETB controlPinMode ( #1260 )
2020-04-04 08:41:45 -04:00
9f75c0cea6
TPS consumers: idle and ignition and obd2 and lcd ( #1254 )
...
* advance_map
* tests
* unneeded
* idle
* use driver intent instead
* and obd and lcd
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-03 19:59:08 -04:00
1fe39e81e0
fix ( #1251 )
2020-04-03 07:48:12 -04:00
b197c6ff07
run ETB on new TPS ( #1248 )
...
* run ETB on new TPS
* why did we include all those...?
* init tps for etb test
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-02 21:33:49 -04:00
22267e5479
Replace hasPedalPositionSensor ( #1245 )
...
* remove
* add Sensor::hasSensor
* consume in etb
* remove unused state
* don't use it there either
* format
* fix up tests
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-02 08:04:12 -04:00
0edb791cff
partial revert
2020-04-02 00:37:02 -04:00
e9665e1ddc
less ETB in case of critical
2020-04-02 00:32:03 -04:00
50cd6549a2
Fully switch acc pedal to new sensors ( #1212 )
...
* proxy sensor
* header
* idle
* can
* settings
* remove old mocking
* remove old impl
* etb
* oops, gotta actually register it
* fix test
* structured bindings ftw!
* driver intent for stepper
* tear out old
* oops too much
2020-04-01 20:21:03 -04:00
d541e04a7d
Friendlier pin names ( #1233 )
...
* enable TS error readout
* friendlier text for common errors
* improve comment
* friendlier ADC errors
* ign/inj names
* more pin names
2020-03-29 19:07:07 -04:00
8fd9842310
cleanup extern mess ( #1237 )
...
* cleanup
* move outside define
2020-03-29 19:06:03 -04:00
d1b5a51400
progress
2020-03-28 20:56:58 -04:00
c778a44c8f
#203
2020-03-26 19:22:14 -04:00
53679fab54
Finally rename injector_central to bench_test ( #1229 )
...
* bench test rename
* rename consumers
* good lord what are all of these externs doing
* fix tests
2020-03-26 08:03:55 -04:00
2349d74f0b
Default to applyPinState ( #1219 )
...
* make applyPinState default
* consumers
* format
2020-03-25 18:14:09 -04:00
1955af0b6c
random code inspired by Ola
2020-03-24 19:50:04 -04:00
391b0ec368
progress
2020-03-23 23:51:51 -04:00
dc769e7a2a
progress
2020-03-23 23:15:44 -04:00
0e6aacb3b8
progress
2020-03-23 23:06:52 -04:00
c0e141026c
code style
2020-03-23 22:31:24 -04:00
165160bb40
random header clean-up
2020-03-23 09:00:57 -04:00
4740f525ee
save some ram ( #1211 )
...
* remove dead stuff
* why store those pointers twice?
2020-03-22 19:06:29 -04:00
c19f3e4caa
Control stepper with dual H-bridges ( #1121 )
...
* divorce stepper from hw
* oops
* ptr not ref
* hbridge stepper
* typo
* hook up twin h
* hook up hardware
* use config field
* hook up motor repo
* guard tests
* whoops
* ok fix for real
* ok that's the right thing
* do full stepping
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.stagpad.local>
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
2020-03-10 15:18:29 -04:00
40b0783205
Split out EtbHardware ( #1168 )
...
* start tear out motor
* fix
* nuke reconfig
* guard for test
* test fixing
* format, condense headers
* fix todos
* undo todo
* format
2020-03-03 17:56:50 -05:00
04a4e2bca3
ETB: expand automated testing #115
2020-02-22 23:18:02 -05:00
20465107ed
boost format & cleanup ( #1126 )
2020-02-05 06:47:31 +05:30
6888b09c53
Three wire idle air valve #1122
...
ugly but should work to begin with
2020-02-04 01:22:04 -05:00
4b4e683957
Boost pr ( #1114 )
...
* boost control
* cleanup
* Delete rusefi_config.txt
* Add files via upload
* Delete rusefi_config.txt
* Add files via upload
* Update rusefi.input
* Update boost_control.cpp
2020-02-02 03:56:21 -05:00
7c714e5727
opening the door to boost controller!
2020-01-31 14:29:52 -05:00
f6e7e8871a
VVT refactoring & assertions for VVT test
2020-01-31 01:49:10 -05:00
fa5b5b76fb
Separate stepper control logic from hardware ( #1101 )
...
* divorce stepper from hw
* oops
* ptr not ref
* ptr not ref
* whitespace
* null check
2020-01-15 02:18:15 -05:00
bb217b01dd
happy new year unification
2020-01-13 21:57:43 -05:00
19df4661ab
better method name
2020-01-10 02:02:22 -05:00
b83a5310be
happy new year
2020-01-08 00:02:40 -05:00
5c85d53e16
Pass action_s instead of callback/param ( #1084 )
...
* change action
* consumers
* fix test
* didn't mean to add those
* simplify
* fix simulator
* fix sim for real
* oy
* maybe this time the simulator will actually be fixed, for real
* don't rely on undefined behavior
2020-01-07 00:41:18 -05:00
0075f9492c
ETB documentation improvement?
2019-12-30 10:25:52 -05:00
1c7de824e2
typo
2019-12-14 18:33:08 -05:00
236d952335
progress towards ETB controller mocking
2019-12-13 13:52:34 -05:00
e9e7a66cf8
etbActualCount logic to handle the scenario where only one ETB is present
2019-12-13 12:50:34 -05:00
af4f20551b
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
0e674f7eca
ETB Encapsulation & C++ Conventions ( #1049 )
...
* encapsulate etb stuff, c++ conventions
* remove DECLARE_ENGINE_PTR/INJECT_ENGINE_REFERENCE
* reduce include dependencies
* Revert "reduce include dependencies"
This reverts commit c529bbbf757cd9070f6e00616f84b1229eeb768e.
* Revert "remove DECLARE_ENGINE_PTR/INJECT_ENGINE_REFERENCE"
This reverts commit ca98b18cd4dae24b993d1263a18daf509dcd54b9.
2019-12-10 19:37:04 -05:00
813b6aa6ce
The Big Refactoring of 2019: folder structure #723
2019-12-04 01:11:10 -05:00
2a39c69f51
iacPidMultTbl + EFI_IDLE_PID_CIC + kinetis_hysteresis ( #1043 )
...
* rename EFI_IDLE_INCREMENTAL_PID_CIC -> EFI_IDLE_PID_CIC
* Impl. IacPidMultTable
* Kinetis: Trigger Comparator Hysteresis settings (+adaptive mode)
2019-12-04 00:37:32 -05:00
de36f76882
The Big Refactoring of 2019: folder structure #723
2019-12-03 23:52:44 -05:00
1c96d9541e
refactoring
2019-12-02 23:08:18 -05:00
1d817e9768
dual throttle re-init bugfix thank you andreika!
2019-12-01 09:39:34 -05:00
3ed889486e
making things nicer with dual ETB settings
2019-11-30 17:38:33 -05:00
b961edc654
refactoring
2019-11-30 16:49:40 -05:00
b04166d173
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
f80fe51092
all ETBs to run in same HW mode
2019-11-30 01:00:54 -05:00
5fa7e082c8
all ETBs to run in same HW mode
...
taking a step back and going to bed :(
2019-11-30 00:39:00 -05:00
2952cd923e
all ETBs to run in same HW mode
2019-11-30 00:25:33 -05:00
a78dc22bf1
better state validation, better error codes
2019-11-29 23:41:26 -05:00
73e3edc3d8
dual ETB seems to work!
2019-11-29 20:15:29 -05:00
e2074388ff
dual ETB seems to work!
2019-11-29 19:06:50 -05:00
76ca1aacb7
all ETBs to run in same HW mode
2019-11-29 19:02:12 -05:00
799027c2e9
all ETBs to run in same HW mode
2019-11-29 16:51:51 -05:00
07f71c8dfa
steps towards dual ETB
2019-11-28 15:24:30 -05:00
067aa0aeee
steps towards dual ETB
2019-11-27 22:07:36 -05:00
1808642af1
Starter relay + Hardcoded 'FSIO' + simulator fix ( #1032 )
...
* Starter Relay: gui + built-in FSIO impl.
* Hardcoded 'FSIO' replacement for RAM-limited boards
* fix simulator
2019-11-25 20:08:01 -05:00
9ee8616cb0
Use templated array references ( #1027 )
...
* update defs
* consumers, use default params
* setArrayValues in tests
* floats
* test fixing
2019-11-22 23:27:24 -05:00
547d9749df
v12 and minor ETB
2019-11-22 23:27:03 -05:00
579219e8cc
inject interfaces to ETB, renaming ( #1026 )
...
* inject interfaces, renaming
* format
* null check
* that was a dumb typo
* fix indent
2019-11-22 20:53:54 -05:00
bb22296f61
DC motor improvements ( #1025 )
...
* extract interface, comments, conform names
* fwd declare
2019-11-22 16:30:44 -05:00
4faca85fdd
following the pattern
2019-11-21 13:35:57 -05:00
f9ccaf5f01
steps towards dual ETB
2019-11-21 00:49:38 -05:00
rusefi
Andreika
Matthew Kennedy
rusefillc
alxrMironov
rusefi
Andrey G
Andrei
960
rusEfi