* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
* ADC: move DMA buffer outside of AdcDevice (save few bytes)
* ADC: inlcude fast channels to debug output
* ADC: save some CPU ticks (disabled until fully tested)
* ADC: simplify
* add linked list
* macros, and use in buttonshift
* unit_tests macros
* add extern
* add parens
* move extern
* move extern
* move buttonDebounceListHead
* move buttonDebouncePointerHead
* merge gore
* undo
* reduce unused size
* don't store pointer if already initialized
* few changes
* remove oldPin
* fix merge conflict
* merge in changes commited to wrong branch
* fix definition
* out of class?
* brute force programming
* fix few problemos
* am confuse
* am confuse
* am confuse
* am confuse
* oldPin snuck in
* move to public?
* define again
* try constexpr
* def in cpp
* remove constexpr
* fix def
* fix?
* update active
* fix a few things
* ADC: remove ADC_TwoSamplingDelay*
1. it is related to double or triple interlived mode only
2. it should be writen to CCR register, not CR1
* ADC: use designated initializers
* mc33 flash check
* DI sanity checks for setting HV config
* mc33816 microcodee source code update for what we got running on the r0.4 board w/ pt2001
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* s
* science
* set pin mode
* turn stuff off so it fits
* filtering maybe
* filtering actually works
* generate filter parameters internally
* shorter window
* guard behind enable flag
* use checked in filter
* add biquad reset
* tracing
* const
* exec order
* do it from a thread
* smaller buffer, comment
* configure with header
* only for proteus
* oops
* unused
* not needed
* guards
* pin config
* don't need that include
* precook filter steady state
* define sample rate
* config enable switch
* improve biquad
* cleanup
* add filtering to subscriptions
* config sensors
* comment
* doesn't need to be that fast
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* second can bus, first steps
* added most important messages; no more errors
* cleaned up can messages
* second can bus, first steps
* added most important messages; no more errors
* cleaned up can messages
* post rebase/merge fixes
* more rebase/merge fixes
* even more rebase/merge fixes
* more fixes, removed auto-gen files
* removed more auto-gen files...
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* binary log
* remove old text logging
* change file extension
* just use a bare buffer
* more mem :(
* double ugh
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 VccP (7v) under voltage detection - before and after DRIVEN, useful for regulator broken - or DC-DC logic converter broken
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
This fixes following build issue under linux:
make: *** No rule to make target 'build/obj/.cpp cj125.cpp', needed by 'build/obj/ build/obj/cj125.o'. Stop.
make: *** Waiting for unfinished jobs....
Introduces in 8d35c35035
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
* mc33 clear driver status on startup
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421)
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* tle8888: fix tle8888_chip_init flow
* tle8888: set correct pin modes for mcu gpios in tle8888_chip_init
Direct drive, reset, inj_en and ign_en gpio should be outputs
rusefi
Matthew Kennedy
David Holdeman
David Holdeman
andreika-git
Andrey G
NOx-z
Andrei
kon