Commit Graph

294 Commits

Author SHA1 Message Date
Chris--A 80f01fbab1 Added additional examples to EEPROM lib 2015-03-17 17:17:08 +10:00
Chris--A bed78fd144 Added new version of EEPROM library. 2015-03-17 17:13:47 +10:00
Martino Facchin 6a86cbc793 Merge branch 'ide-1.5.x' into SoftwareSerial 2015-03-05 12:33:35 +01:00
Martino Facchin b95533ffd0 SoftwareSerial: match bool API with HardwareSerial 2015-03-05 12:30:01 +01:00
Cristian Maglie e93be4855f Corrected some email contacts. 2015-02-05 16:47:22 +01:00
Matthijs Kooijman 90ca3934f2 Prevent low pulse on TX initialization in SoftwareSerial
Previously, the TX pin would be set to output first and then written
high (assuming non-inverted logic). When the pin was previously
configured for input without pullup (which is normal reset state), this
results in driving the pin low for a short when initializing. This could
accidenttally be seen as a stop bit by the receiving side.

By first writing HIGH and then setting the mode to OUTPUT, the pin will
have its pullup enabled for a short while, which is harmless.
2015-01-26 17:04:26 +01:00
Matthijs Kooijman 9cf3740a03 Remove unneeded #ifdef in SoftwareSerial
The debugPulse function definition already checks for _DEBUG, resulting
in an empty function definiton and the function call being optimized
away.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman ead2881b1c Fix SoftwareSerial timings
Instead of using a lookup table with (wrong) timings, this calculates
the timings in SoftwareSerial::begin. This is probably a bit slower, but
since it typically happens once, this shouldn't be a problem.
Additionally, since the lookup tables can be removed, this is also a lot
smaller, as well as supporting arbitrary CPU speeds and baudrates,
instead of the limited set that was defined before.

Furthermore, this switches to use the _delay_loop_2 function from
avr-libc instead of a handcoded delay function. The avr-libc function
only takes two instructions, as opposed to four instructions for the old
one. The compiler also inlines the avr-libc function, which makes the
timings more reliable.

The calculated timings directly rely on the instructions generated by
the compiler, since a significant amount of time is spent processing
(compared to the delays, especially at higher speeds). This means that
if the code is changed, or a different compiler is used, the
calculations might need changing (though a few cycles more or less
shouldn't cause immediate breakage).

The timings in the code have been calculated from the assembly generated
by gcc 4.8.2 and gcc 4.3.2.

The RX baudrates supported by SoftwareSerial are still not unlimited. At
16Mhz, using gcc 4.8.2, everything up to 115200 works. At 8Mhz, it works
up to 57600. Using gcc 4.3.2, it also works up to 57600 at 16Mhz and up
to 38400 at 8Mhz. Note that at these highest speeds, communication
works, but is still quite sensitive to other interrupts (like the
millis() interrupts) when bytes are sent back-to-back, so there still
are corrupted bytes in RX.

TX works up to 115200 for all combinations of compiler and clock rates.

This fixes #2019
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 08fa593916 Disable the RX PCINT inside SoftwareSerial::recv
Before, the interrupt would remain enabled during reception, which would
re-set the PCINT flag because of the level changes inside the received
byte. Because interrupts are globally disabled, this would not
immediately trigger an interrupt, but the flag would be remembered to
trigger another PCINT interrupt immediately after the first one is
processed.

Typically this was not a problem, because the second interrupt would see
the stop bit, or an idle line, and decide that the interrupt triggered
for someone else. However, at high baud rates, this could cause the
next interrupt for the real start bit to be delayed so much that the
byte got corrupted.

By clearing the interrupt mask bit for just the RX pin (as opposed to
the PCINT mask bit for the entire port), any PCINT events on other bits
can still set the PCINT flag and be processed as normal. In this case,
it's likely that there will be corruption, but that's inevitable when
(other) interrupts happen during SoftwareSerial reception.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman ce6b0f89e3 Optimize SoftwareSerial::setRxIntMsk()
This precalculates the mask register and value, making setRxIntMask
considerably less complicated. Right now, this is not a big deal, but
simplifying it allows using it inside the ISR next.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman ddbe3174f0 In SoftwareSerial::recv, only calculate the new tail once
This shortens the generated code a bit more.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 9d8f350ffe Mark SoftwareSerial::recv and handle_interrupt as always_inline
Since those functions are only called once now, it makes sense to inline
them. This saves a few bytes of program space, but also saves a few
cycles in the critical RX path.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 5af847d3a4 In SoftwareSerial, use ISR_ALIASOF to prevent duplication
Previously, up to four separate but identical ISR routines were defined,
for PCINT0, PCINT1, PCINT2 and PCINT3. Each of these would generate
their own function, with a lot of push-popping because another function
was called.

Now, the ISR_ALIASOF macro from avr-libc is used to declare just the
PCINT0 version and make all other ISRs point to that one, saving a lot
of program space, as well as some speed because of improved inlining.

On an Arduino Uno with gcc 4.3, this saves 168 bytes. With gcc 4.8, this
saves 150 bytes.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 87f89f6100 Optimize SoftwareSerial::recv
Similar to SoftwareSerial::write, this rewrites the loop to only touch
the MSB and then shift those bits up, allowing the compiler to generate
more efficient code. Unlike the write function however, it is not needed
to put all instance variables used into local variables, for some reason
the compiler already does this (and doing it manually even makes the
code bigger).

On the Arduino Uno using gcc 4.3 this saves 26 bytes. Using gcc 4.8 this
saves 30 bytes.

Note that this removes the else clause in the code, making the C code
unbalanced, which looks like it breaks timing balance. However, looking
at the code generated by the compiler, it turns out that the old code
was actually unbalanced, while the new code is properly balanced.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 764f24266e Further optimize SoftwareSerial::write
This change restructures the loop, to help the compiler generate shorter
code (because now only the LSB of the data byte is checked and
subsequent bytes are shifted down one by one, it can use th "skip if bit
set" instruction).

Furthermore, it puts most attributes in local variables, which causes
the compiler to put them into registers. This makes the timing-critical
part of the code smaller, making it easier to provide accurate timings.

On an Arduino uno using gcc 4.3, this saves 58 bytes. On gcc 4.8, this
saves 14 bytes.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 80ea38b1dc Mark SoftwareSerial::tx_pin_write as "always_inline"
Somehow gcc 4.8 doesn't inline this function, even though it is always
called with constant arguments and can be reduced to just a few
instructions when inlined. Adding the always_inline attribute makes gcc
inline it, saving 46 bytes on the Arduino uno.

gcc 4.3 already inlined this function, so there are no space
savings there.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 416198a03b Simplify SoftwareSerial::write
Before, there was nearly identical code for the inverted and regular
cases. However, simply inverting the byte in the inverted case allows
using the regular code twice, reducing the generated code size by 100
bytes (on an Arduino Uno and gcc 4.3, on gcc 4.8 the reduction is 50
bytes).
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 6685aa999c Use stopListening() in SoftwareSerial::end()
stopListening also disabled the interrupt, if needed, so calling that
function makes more sense. Since stopListening only disables the
interrupt when the current SoftwareSerial is the active object, and that
can only be the case when _rx_delay_stopbit is non-zero, there is no
need to separately check _rx_delay_stopbit anymore.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman f3aa5f23c4 Fix race condition in SoftwareSerial::overflow()
If an interrupt causing overflow would occur between reading
_buffer_overflow and clearing it, this overflow condition would be
immediately cleared and never be returned by overflow().

By only clearing the overflow flag if an overflow actually occurred,
this problem goes away (worst case overflow() returns false even though
an overflow _just_ occurred, but then the next call to overflow() will
return true).
2015-01-26 17:03:25 +01:00
Matthijs Kooijman b1de3e6621 Toggle SoftwareSerial interrupts when starting / stopping to listen
This prevents interrupts from triggering when the SoftwareSerial
instance is not even listening.

Additionally, this removes the need to disable interrupts in
SoftwareSerial::listen, since no interrupts are active while it touches
the variables.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 934393398b Add SoftwareSerial::stopListening()
This allows one to explicitly stop a SoftwareSerial instance from
listening, without having to make another one listening.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman db1a4ad139 Add SoftwareSerial::setRxIntMsk()
This moves the interrupt mask enabling / disabling code into a separate
method, so we can call it from multiple spots next.
2015-01-26 17:03:25 +01:00
Matthijs Kooijman 1704e7e820 Let SoftwareSerial::end also check against _rx_delay_stopbit
The current check is still always false when the old check was, but
additionally it will not disable the interrupts when they were never
enabled (which shouldn't matter much, but this is more consistent).
2015-01-26 17:03:24 +01:00
Matthijs Kooijman b1c7a3d05f Let SoftwareSerial::listen() fail on invalid rx baud rates
In this case, SoftwareSerial::begin will not have enabled the
interrupts, so better not allow the SoftwareSerial instance to enter the
listening state either.
2015-01-26 17:03:24 +01:00
Matthijs Kooijman 937cc51c69 Clear SoftwareSerial rx delay if no interrupt register is found
Before enabling interupts, begin would see if the given receive pin
actually has an associated PCINT register. If not, the interrupts would
not be enabled.

Now, the same check is done, but when no register is available, the rx
parameters are not loaded at all (which in turn prevents the interrupt
from being enabled). This allows all code to use the same "is rx
enabled" (which will be added next).
2015-01-26 17:03:24 +01:00
Cristian Maglie a9735bf91f Fix atomicity issues in SPI::beginTransaction and SPI::endTransaction (Andrew Kroll)
Previously, it could happen that SPI::beginTransaction was
interrupted by an ISR, while it is changing the SPI_AVR_EIMSK
register or interruptSave variable (it seems that there is
a small window after changing SPI_AVR_EIMSK where an interrupt
might still occur). If this happens, interruptSave is overwritten
with an invalid value, permanently disabling the pin interrupts.

To prevent this, disable interrupts globally while changing
these values.
2014-11-25 15:56:11 +01:00
Cristian Maglie 84b6cc27a5 [avr] Made SPI.usingInterrupt() synchronized (Andrew Kroll) 2014-11-25 15:56:11 +01:00
Cristian Maglie d9537cb7da [avr] Added SPI.notUsingInterrupt() (Andrew Kroll) 2014-11-25 15:56:11 +01:00
Cristian Maglie 8344812ce8 [avr] Made SPI.begin() and SPI.end() synchronized (Andrew Kroll) 2014-11-25 15:49:17 +01:00
Cristian Maglie 53e25d8b55 [avr] Improved SPI speed on 16bit transfer.
From https://github.com/arduino/Arduino/pull/2376#issuecomment-59671152

Quoting Andrew Kroll:

   [..this commit..] introduces a small delay that can prevent the wait
   loop form iterating when running at the maximum speed. This gives
   you a little more speed, even if it seems counter-intuitive. At
   lower speeds, it is unnoticed. Watch the output on an oscilloscope
   when running full SPI speed, and you should see closer back-to-back
   writes.

Quoting Paul Stoffregen:

   I did quite a bit of experimenting with the NOP addition. The one
   that's in my copy gives about a 10% speedup on AVR.
2014-11-25 15:49:17 +01:00
Cristian Maglie 34c40b224f [avr] SPI: removed redundant include 2014-11-14 00:23:11 +01:00
Cristian Maglie 993cc9bbb4 [avr] Small comments and headers fixes in SPI 2014-11-14 00:23:11 +01:00
PaulStoffregen 3d5ef6d5d9 SPI Transactions for AVR 2014-08-01 05:38:27 -07:00
Fede85 dd77375fe9 missing paragraph field in library.properties 2014-07-18 20:08:01 +02:00
Fede85 b02e85ceb2 modified sentences in library.properties files 2014-07-18 19:41:34 +02:00
Cristian Maglie 49ec540204 Merge pull request #1912 from Lauszus/issues440
Enable user to change the I2C clock frequency by calling setClock in the Wire library
2014-07-02 15:37:30 +02:00
Cristian Maglie 5d92c1ba8e Merge remote-tracking branch 'arduino/master' into ide-1.5.x
Conflicts:
	build/shared/examples/01.Basics/Blink/Blink.ino
	build/shared/examples/09.USB/Keyboard/KeyboardReprogram/KeyboardReprogram.ino
	build/shared/examples/10.StarterKit/p02_SpaceshipInterface/p02_SpaceshipInterface.ino
	hardware/arduino/cores/arduino/HardwareSerial.cpp
2014-05-23 21:04:47 +02:00
Kristian Lauszus 7fcc8ab08a Enable user to change the I2C clock frequency by calling setClock in the Wire library 2014-03-06 17:23:49 +01:00
Cristian Maglie d5c828736b Revert "SPI library to new format" 2013-11-21 15:05:36 +01:00
Cristian Maglie ff24874117 Revert "EEPROM library to the new format"
This reverts commits:
3223d4fdca
77f8dd63ab
2013-11-21 11:22:44 +01:00
Cristian Maglie 7f17170678 Revert "SoftwareSerial library to the new format"
This reverts commit 38c3bbbd3c.
2013-11-15 12:54:59 +01:00
Cristian Maglie 9a9652d506 Revert "Wire library to the 1.5 format"
This reverts commit a31857688b.
2013-11-15 12:54:59 +01:00
Fede85 a31857688b Wire library to the 1.5 format 2013-09-10 18:50:42 +02:00
Fede85 c35d4dc131 SpacebrewYun library to the 1.5 format 2013-09-06 18:25:03 +02:00
Fede85 fa22bc358e Temboo library to the 1.5 format 2013-09-06 18:15:14 +02:00
Fede85 81338e245b Bridge library to the 1.5 format 2013-09-06 15:38:07 +02:00
Federico Fissore 4f3b22fd28 Spacebrew keywords 2013-08-28 10:12:33 +02:00
Federico Fissore 7832a997cc spacebrew update 2013-08-28 10:12:33 +02:00
Federico Fissore 8fd9b8f8ee removed .DS_Store folder 2013-08-28 10:12:33 +02:00
Cristian Maglie ea8c14421a Merge branch 'ide-1.5.x' into dev-ide-1.5.x-discovery
Conflicts:
	app/src/processing/app/Preferences.java
	app/src/processing/app/debug/Uploader.java
2013-08-23 15:59:24 +02:00
Federico Fissore 0c7a75fd64 TemperatureWebPanel: widening refresh interval 2013-07-25 14:31:26 +02:00
Fede85 fd7e9c6d90 WiFi library to the new format 2013-07-19 16:20:34 +02:00
Federico Fissore 0aa42f1914 Bridge: Bridge.begin should wait more before giving up, as other processes may consume linux cpu power 2013-07-19 15:18:55 +02:00
Federico Fissore 8f59bc13c5 SpacebrewYun: added new example 2013-07-18 14:07:39 +02:00
Angelo Scialabba 2ce3a4a8fc Bridge: CRC16 being used as CRC 2013-07-15 16:41:17 +02:00
Federico Fissore ce8c212a5f updated temboo examples (added ControlBySMS) 2013-07-15 15:22:50 +02:00
Cristian Maglie 008818868c Merge branch 'ide-1.5.x' into dev-ide-1.5.x-discovery
Conflicts:
	app/src/cc/arduino/packages/uploaders/SerialUploader.java
	app/src/processing/app/Editor.java
	app/src/processing/app/Sketch.java
	app/src/processing/app/debug/Uploader.java
2013-07-14 12:01:03 +02:00
Cristian Maglie 65c36f2eb6 Merge branch 'master' into ide-1.5.x 2013-07-14 11:51:50 +02:00
Federico Fissore de095c0c43 File: implemented File.openNextFile() and File.rewindDirectory() 2013-07-11 18:14:49 +02:00
Federico Fissore 08d9e574c8 FileIO.h: removed wrong function declaration 2013-07-11 13:22:52 +02:00
Federico Fissore eaffb912f6 Added File.isDirectory() 2013-07-11 13:06:48 +02:00
Federico Fissore f149dac5a7 updated temboo examples 2013-07-11 11:24:53 +02:00
Cristian Maglie 08e99376ec Updated YunSerialTerminal: added command to shutdown bridge 2013-07-10 20:37:31 +02:00
Cristian Maglie 567af70a44 Bridge: even more reliable startup 2013-07-10 20:24:16 +02:00
Federico Fissore 0e8c5a66cd updated temboo examples 2013-07-10 09:47:18 +02:00
Federico Fissore 915d6d92c7 WifiStatus example:updated sketch description 2013-07-09 20:08:17 +02:00
Federico Fissore 13f7439940 temboo examples updated 2013-07-09 20:07:54 +02:00
Federico Fissore e6b311b226 updated temboo examples 2013-07-08 15:09:09 +02:00
Federico Fissore 21ccdd0a96 Merge branch 'ide-1.5.x-discovery' into dev-ide-1.5.x-discovery 2013-07-07 17:07:32 +02:00
tigoe fa7dbd115b #include Bridge.h in HttpClient 2013-07-06 09:12:01 -04:00
tigoe 8343826355 Corrected file structure on TemperatureWebPanel 2013-07-06 09:11:37 -04:00
tigoe cd9d755bb0 Updated TemperatureWebPanel 2013-07-06 08:20:02 -04:00
tigoe c777b5c76b Updated TemperatureWebPanel 2013-07-06 08:10:13 -04:00
tigoe 41f1be5fc7 Added TemperatureWebPanel example 2013-07-06 07:48:10 -04:00
Federico Fissore 6293c76bff forgot to include YunClient 2013-07-05 19:14:51 +02:00
Federico Fissore 645a57359e delete OLDYahooWeather example
Updated pretty-wifi-info-lua path in ShellCommands and WifiStatus examples
Tried to make a sense of HttpClient example by making it fetch http://arduino.cc/asciilogo.txt
2013-07-05 15:06:37 +02:00
Federico Fissore 172007b475 renamed two lua scripts 2013-07-05 13:50:00 +02:00
Federico Fissore 6eec8e0922 introducing Temboo library 2013-07-05 11:55:38 +02:00
Cristian Maglie 46a1cf6f06 YunServer: added write() method 2013-07-04 17:39:14 +02:00
Cristian Maglie 34885b019b Refactored YunClient and YunServer classes.
Added YunClient.connect() methods.
2013-07-04 17:15:52 +02:00
Federico Fissore 8c9a06056e BootWatcher removed
BridgeNew is the new Bridge
2013-07-04 16:33:10 +02:00
Fede85 24e63ee6bc Esplora library to new format 2013-07-04 15:54:30 +02:00
Fede85 10a4241ba7 updated Firmata library to version 2.3.5 and moved to the new library format 2013-07-04 13:29:15 +02:00
Fede85 38c3bbbd3c SoftwareSerial library to the new format 2013-07-03 23:18:21 +02:00
Fede85 2919e34ff8 GSM library to the new format and some strings adaptations 2013-07-03 22:55:18 +02:00
Fede85 2371e2ce0d SPI library to the new format and moved Robot_Motor and Robot_Control libraries 2013-07-03 22:00:02 +02:00
Fede85 87d3b4f56b TFT library to new format 2013-07-03 16:25:45 +02:00
Federico Fissore 53aa42351f YunServer: added default port number 5555 2013-07-03 13:43:47 +02:00
Federico Fissore 60d19a0907 requests coming to YunServer do not start with a slash any more 2013-07-03 11:26:30 +02:00
Federico Fissore 5f60509f23 updated temboo examples 2013-07-03 09:03:17 +02:00
Fede85 5d102a5597 modifide comments in Yun examples ShellCommands.ino ConsolePixel.ino 2013-07-02 21:23:59 +02:00
Fede85 2b4346b1f5 modified and added comments to the ConsoleRead.ino example 2013-07-02 16:38:59 +02:00
Fede85 f9989cce62 moved from Console to Serial output in Yun Process example 2013-07-02 15:17:22 +02:00
Fede85 42d7b1d85a modified the WifiStatus example and comments in TimeCheck example 2013-07-01 20:11:14 +02:00
Cristian Maglie dbd001a776 Added example BridgeNew 2013-07-01 19:12:49 +02:00
Cristian Maglie 6fb6e63e99 YunServer: added method to allow listening on localhost only 2013-07-01 19:12:49 +02:00
Cristian Maglie ad280d5d8b Bridge: added put(..) method with String variant 2013-07-01 19:12:49 +02:00
Fede85 d4753eed46 typo in Bridge keywords.txt 2013-07-01 17:59:15 +02:00
Fede85 7e039df21f modified the Datalogger example 2013-07-01 17:58:03 +02:00
Fede85 fc880cc566 modified the FileWriteScript example 2013-07-01 16:20:05 +02:00
Fede85 e6af3acdce Added the Keywords.txt file 2013-07-01 11:53:10 +02:00
Federico Fissore 4ae392b0b5 updated and added new Temboo examples 2013-06-28 15:29:39 +02:00
Cristian Maglie c4753e97b3 Bridge: added YunServer and TunClient class 2013-06-28 09:49:22 +02:00
Cristian Maglie bb763efe09 Temboo examples moved in their specific folder 2013-06-27 22:40:34 +02:00
Fede85 dc9c791070 Stepper library to the new format 2013-06-27 19:24:16 +02:00
Cristian Maglie 579ff7c7a6 Bridge default speed increased to 250k 2013-06-27 15:44:20 +02:00
Fede85 3b54dfed67 Servo library to the new format 2013-06-27 13:12:07 +02:00
Fede85 77f8dd63ab EEPROM library to the new format 2013-06-27 12:16:14 +02:00
Cristian Maglie 8830751859 Moved Bridge.message* method on their own class. 2013-06-26 22:12:09 +02:00
Cristian Maglie fdae2dbb6e Removed unused Stream interface from Bridge class 2013-06-26 21:53:22 +02:00
Fede85 9454816162 Ethernet, SD and LiquidCrystal to the new library format 2013-06-26 19:13:04 +02:00
Federico Fissore 8ac5c7c076 included newest Temboo examples 2013-06-26 17:29:57 +02:00
Tom Igoe 20be75fe77 Made ShellCommands example more physical 2013-06-25 14:07:53 -04:00
Tom Igoe 86438fc84b Added ConsolePixel example 2013-06-25 13:57:19 -04:00
Tom Igoe 7b25e85a56 Updated XivelyClient to use Serial instead of Console 2013-06-25 10:42:30 -04:00
Tom Igoe 7fae00bce4 Removed old WifiCheck and WifiSignalStrengthIndicator examples 2013-06-22 02:05:03 -04:00
Tom Igoe fab454e805 Simplified TimeCheck 2013-06-22 02:03:47 -04:00
Tom Igoe d612a6f2ee Changed ShellCommands from Console to Serial 2013-06-22 02:03:35 -04:00
Tom Igoe 0002863b90 Adjusted datalogger to remove indirection reference and changed from Console to Serial 2013-06-22 02:03:22 -04:00
Tom Igoe b510c2a760 Updated comments 2013-06-22 01:43:53 -04:00
Fede85 57fe16894a added the YahooWeather example 2013-06-21 20:09:04 +02:00
Fede85 deaee73f20 renamed SD to FileSystem in FileIO library 2013-06-21 19:48:56 +02:00
Federico Fissore 051772ba50 updated pretty_wifi_info.lua script path 2013-06-21 12:02:34 +02:00
Federico Fissore 7455a7a7d8 added writeJSON 2013-06-20 16:54:08 +02:00
Federico Fissore a224ada957 reviewed bridge example
added BridgeClass::writeMessage(const String& str)
2013-06-20 16:32:47 +02:00
Fede85 58f612a11f modified SDclass.begin() check for sd presence and added the Datalogger example 2013-06-20 13:24:27 +02:00
Federico Fissore 5fe3d5eda1 YunSerialTermina speed back to 115200 2013-06-19 15:41:22 +02:00
Federico Fissore 211efd9ce0 wifi examples renamed OLD*, introducing new comprehensive WiFiStatus example
reviewed ShellCommands example to be not wifi related
2013-06-18 16:42:24 +02:00
Federico Fissore 2a1602593e bringing serial speed back to 115200 2013-06-18 09:17:42 +02:00
Tom Igoe 00bd3fd10b Simpllified ConsoleRead, added available(), added explanation. 2013-06-16 23:10:17 -04:00
Federico Fissore a7b5f23556 adding ConsoleRead example 2013-06-13 17:29:23 +02:00
Cristian Maglie becadbf8cf Added Process.runShellCommand*() methods. 2013-06-12 13:28:24 +02:00
Cristian Maglie 6b4f745d9a Refactored String methods and constructor on Process class. 2013-06-12 13:20:25 +02:00
Cristian Maglie 4d1b7ecf5e Removed unused constants 2013-06-12 13:16:21 +02:00
Cristian Maglie 0f00c54450 Factored Process class 2013-06-12 12:42:38 +02:00
Cristian Maglie 1958ecd620 Bridge class now checks for protocol version 2013-06-12 12:09:04 +02:00
Tom Igoe e5ea217429 Added Michael Shiloh's WifiSignalStrengthIndicator example 2013-06-11 12:28:14 -04:00
Cristian Maglie 4392938f6a Implemented FileIO.position() 2013-06-10 11:50:00 +02:00
Cristian Maglie b41d62b516 Fixed return type for Bridge.transfer(). Refactored File I/O class. 2013-06-10 11:24:32 +02:00
Cristian Maglie 306e079ef0 Updated File example 2013-06-07 18:35:30 +02:00
Cristian Maglie a60c7d0244 Bridge: updated startup procedure 2013-06-07 18:33:53 +02:00
Cristian Maglie 8dfa8775e5 Bridge: now processes start can be checked for errors 2013-06-07 17:40:10 +02:00
Cristian Maglie 0541c2663a Bridge: updated startup procedure 2013-06-07 17:39:30 +02:00
Cristian Maglie 37da7c8294 Bridge: Added File I/O 2013-06-07 17:39:03 +02:00
Cristian Maglie 0a72c96b50 Added comment to some examples 2013-06-05 20:20:18 +02:00
Cristian Maglie fca5f46165 Updated some Bridge examples 2013-06-05 14:51:15 +02:00
Cristian Maglie 4c0f864f90 Improved Bridge memory usage. Fixed bug affecting buffers with more than 255 bytes 2013-06-05 12:58:21 +02:00
Cristian Maglie 590ead58ad Bridge protocol frame lenght is now a 16-bit field. Added more efficient Bridge.trasnfer() methods. 2013-06-05 11:50:33 +02:00
Cristian Maglie b4852f353c Merge remote-tracking branch 'dog/ide-1.5.x-discovery' into ide-1.5.x-discovery
Conflicts:
	app/src/processing/app/Base.java
	app/src/processing/app/Editor.java
2013-06-04 19:33:38 +02:00
Federico Fissore b8486c287f using new run-bridge script 2013-06-03 11:50:46 +02:00