08c6609b4b
Merge pull request #7176 from mikeller/add_4_0_postponement_note
...
Added postponement note for Betaflight 4.0.
2018-12-06 13:12:49 +13:00
3100264e86
Merge pull request #7157 from ethomas997/vtxSetGetFreqFix
...
Fix SmartAudio 'looping' after vtx_freq in MHz set
2018-12-06 00:08:00 +13:00
c6faec2a00
Merge pull request #7163 from TonyBlit/gps_vario_2
...
Numeric Vario calculated with GPS altitude
2018-12-06 00:07:05 +13:00
a7d2852700
Merge pull request #7170 from wind0r/fix_bst_writeGpsPositionPrameToBST
...
fix writeGpsPositionPrameToBST
2018-12-06 00:05:18 +13:00
40164e7351
Merge pull request #7172 from TonyBlit/osd_gps_blink_2
...
OSD GPS indicator blinks when numSats is below 5
2018-12-06 00:04:35 +13:00
f1b4eb48c3
Added postponement note for Betaflight 4.0.
2018-12-05 21:07:31 +13:00
6a6193551c
Numeric Vario calculated with GPS altitude
2018-12-05 09:01:53 +01:00
c400186e70
Merge pull request #7078 from kmitchel/cascaded_dynamic_notch
...
Cascaded dynamic notches.
2018-12-05 12:49:11 +13:00
93bf8b2186
OSD GPS indicator blinks when numSats is below 5
2018-12-04 09:19:45 +01:00
46fa249f25
Merge pull request #7169 from jflyper/bfdev-fix-f411-clock-levels
...
[F411,SYSTEM] Delete bogus clock PLL parameter table entry
2018-12-04 20:46:23 +13:00
1588a6a23d
fix writeGpsPositionPrameToBST
2018-12-03 16:35:50 +01:00
ac02ee4cf2
Delete bogus clock pll entry
2018-12-03 22:52:23 +09:00
b6408b3a32
Merge pull request #6714 from pkruger/4155-feature-for-osd-elements-on-a-switch
...
4155 feature for osd elements on a switch
2018-12-04 02:25:57 +13:00
bb1e254d96
Merge pull request #7168 from mikeller/fix_arming_prevention_test
...
Fixed arming prevention unittest.
2018-12-04 02:24:38 +13:00
1784910aa8
Fixed arming prevention unittest.
2018-12-04 01:34:06 +13:00
76e3722a17
Merge pull request #7159 from TonyBlit/gps_rescue_prevent_arm
...
GPS Rescue: check failsafe procedure when preventing arming
2018-12-03 23:33:04 +13:00
8eff13e8ab
Merge pull request #7160 from TonyBlit/gps_total_distance_speed
...
Calculate distance flown with a speed threshold
2018-12-03 23:32:43 +13:00
8e9462e251
Merge pull request #7158 from TonyBlit/gps_rescue_armed_check
...
Arm prevention if Rescue is activated
2018-12-03 21:52:42 +13:00
6566ec8ed6
Merge pull request #7151 from jflyper/bfdev-configurable--sdcard-spi-sdio
...
[SDCARD,MSC] Switch USBD storage fops table according to sdcard config
2018-12-03 21:39:22 +13:00
c119843785
Merge pull request #7162 from TonyBlit/gps_osd_blink
...
Blink GPS indicator on OSD when numsats is lower than minimum configu…
2018-12-03 21:37:31 +13:00
55a56cd522
Merge pull request #7148 from TonyBlit/osd_warn_rcsmoothing
...
Added missing osd_warn_rc_smoothing in settings
2018-12-03 21:34:04 +13:00
ec7204e4a5
Merge pull request #7154 from mikeller/fix_bmi160_gyro
...
Fixed build dependency on EXTI for BMI160 driver.
2018-12-03 21:32:56 +13:00
1fbaca86b4
Fix 'looping' after vtx_freq in MHz set
...
Added 'saGetSettings()' to saDoDevSetFreq() fn
2018-12-02 14:06:00 -05:00
84d2bc2c83
Arm prevention if Rescue is activated
2018-12-02 19:17:52 +01:00
233ac7fb3f
Allow width=0 to select single notch. Restore dyn lpf mins.
2018-12-02 10:01:51 -05:00
011eae93c6
Cascaded notch filters.
2018-12-02 09:52:02 -05:00
0cf8679b5c
Switch USBD storage fops table according to sdcard config
2018-12-02 21:51:40 +09:00
d87e40725e
Calculate distance flown with a speed threshold
2018-12-02 06:49:46 +01:00
bdd57a6ce4
GPS Rescue: check failsafe procedure when preventing arming
2018-12-02 04:47:47 +01:00
8a15b128dc
Added missing osd_warn_rc_smoothing in settings
2018-12-02 04:37:18 +01:00
ca5da2fdbb
Fixed build dependency on EXTI for BMI160 driver.
2018-12-02 10:50:15 +13:00
3736a2486d
Merge pull request #7116 from jflyper/bfdev-status-command-refactor
...
[CLI] Refactor status command to print things in more sensible order
2018-12-02 10:41:07 +13:00
d4ac21cdc7
Refactor status command to print things in more sensible order
2018-12-01 22:21:58 +09:00
8d981df1a9
Add OSD Profile feature - issue 4155
2018-12-01 17:51:38 +10:00
eadddf90af
Blink GPS indicator on OSD when numsats is lower than minimum configured for GPS Rescue
2018-11-30 05:54:34 +01:00
8a4ea0785e
Merge pull request #7142 from mikeller/remove_use_multi_gyro
...
Removed USE_MULTI_GYRO from targets that have it defined by default.
2018-11-29 19:28:54 +13:00
ed86cd27e5
Merge pull request #7143 from etracer65/rc_smoothing_retraining_samples
...
RC Smoothing: reduce retraining sample count
2018-11-29 19:28:41 +13:00
d9da73a496
Merge pull request #7145 from etracer65/msc_osx
...
Fixes to allow the MSC command with on-board flash to work on MacOS.
2018-11-29 19:26:47 +13:00
2fd4589106
Merge pull request #7127 from jflyper/bfdev-KROOZX-use-pinio-for-OSD-channel-switch
...
[KROOZX] Use pinio for OSD channel switch and move OSD_CH_SWITCH out of target.h
2018-11-28 23:52:35 +13:00
4134c9c790
Merge pull request #7135 from jflyper/bfdev-move-hcsr04-default-pins-out-of-driver
...
[RANGEFINDER_HCSR04] Move default pin defs out of driver file
2018-11-28 23:52:15 +13:00
8300203dcd
Merge pull request #7141 from mikeller/amend_parameter_group_doc_again
...
Amended parameter group documentation to include array length considerations.
2018-11-28 23:51:45 +13:00
0f7d1ead97
Move default pin defs out of driver file
2018-11-28 14:07:49 +09:00
a1899d671b
Fixes to allow the MSC command with on-board flash to work on MacOS.
...
Fixed a bug in the STM libraries to set the write protected bin in the device config for the mass storage SCSI sense code 6 and 10. Previously the `isWriteProtected()` result was only being examined during write attempts and they correctly failed and returned a `NOT_READY` response (we don't support writes for SPIFLASH). Unfortunately since the device was not flagged as write protected on MacOS the operating system would try to write to the device and this would fail causing the operating system to think the device wasn't ready and refuse to mount it.
General fixes:
Ensured that the filesystem appears to be at least 256MB so that the volume will be treated as FAT32 instead of FAT16. A hidden "padding.txt" file is created to represent the extra space.
Fix the directory structure to only create the "btfl_all.bbl" file if there were any logs found. Previously it would always be created and this would lead to directory corruption.
Fix the size calculation for the "btfl_all.bbl" file. Previously it was being set to the total flash size rather than the used space.
2018-11-27 18:48:46 -05:00
76e537cff7
RC Smoothing: reduce retraining sample count
...
Reduce the retraining sample count from 50 to 20. The initial training remains unchanged at 50 samples.
Speeds up the transition to a new detected frame rate and adjusts the filters to new optimal cutoffs quicker. As an example for CRSF: switching from 150hz to 50hz would take approximately 1 second (50 samples @ 20ms). After this change it will take approximately 0.4 seconds.
2018-11-27 10:48:53 -05:00
39582667c2
Merge pull request #7131 from jflyper/bfdev-wormfc-remove-stale-def
...
[WORMFC] Remove stale BOARD_HAS_VOLTAGE_DIVIDER
2018-11-28 00:46:44 +13:00
73fdb9fae4
Merge pull request #7133 from jflyper/bfdev-kroozx-remove-stale-config-address-def
...
[KROOZX] Remove stale config address def
2018-11-28 00:46:14 +13:00
5cd29f6eb0
Merge pull request #7134 from jflyper/bfdev-max7456-default-instance-to-null
...
[MAX7456] SPI instance defaults to NULL
2018-11-28 00:45:57 +13:00
fa5716a20d
Merge pull request #7136 from mikeller/fix_gyro_dev_parameter_group
...
Fixed define dependency of gyro device parameter group, gyro EXTI CLI support.
2018-11-28 00:42:57 +13:00
6d726f7d5f
Removed USE_MULTI_GYRO from targets that have it defined by default.
2018-11-28 00:31:18 +13:00
9ef4a118b7
Merge pull request #7100 from TonyBlit/gps_total_distance_fix
...
Total Distance is reset on re-arming
2018-11-27 23:36:52 +13:00
Michael Keller
Tony Cabello
Steffen Windoffer
jflyper
E Thomas
Kenneth Mitchell
Pieter Kruger
Bruce Luckcuck