Commit Graph

112 Commits

Author SHA1 Message Date
dongie e1087cf921 fix returned size in MSP_MISC, should correct CRC errors in other GUIs and correctly work with MSP_SET_MISC in MultiWiiConf 2013-11-02 12:40:56 +09:00
timecop@gmail.com 609df47cd4 tri gyro data reading fix - closes issue #18
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@464 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-11-01 00:47:05 +00:00
timecop@gmail.com 2d076db908 Built firmware to match r460.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@461 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-10-28 23:49:06 +00:00
timecop@gmail.com 3bb1063001 fixed buzzer on rev5 boards;
added experimental gyro-based headfree boxes

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@429 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-10-04 14:36:34 +00:00
timecop@gmail.com 800ce6bdf7 fixed a fuckup with yaw_rate that was caused by more 8bit leftover garbage
fixed althold vel/constrain typo thx Marcin
flight-tested this build on my shitcopter, CAREFUL flight testing may commence.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@428 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-10-04 01:51:31 +00:00
timecop@gmail.com edb0ef01b7 fixed mag gain during testmode (thanks pm1) and added some explicit float definitions to mag test code.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@396 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-09-12 10:50:13 +00:00
timecop@gmail.com 509e349e69 Whitespace/compiler warnings cleanups by Dominic Clifton;
Slight tweak of new althold defaults
NOT-flight-tested .hex committing so people can commence with althold testing.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@391 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-08-31 01:40:13 +00:00
timecop@gmail.com 3b8c1841f8 new SPI2 driver w/testcase
5883 and 6050 driver updates

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@363 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-07-02 02:52:33 +00:00
timecop@gmail.com 57cbd784a9 a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
turn off leds/beeper before initializing pins to prevent flash at startup
uninitialized errorAngle fix in new PID


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@362 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-07-02 00:58:50 +00:00
timecop@gmail.com e010e3a354 Cleaned up SetSysClock to remove duplicated code when configuring HSE or HSI
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@359 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-30 06:25:24 +00:00
timecop@gmail.com e4ea700fe0 reverted cli line editing stuff - was more trouble than its worth, and caused issues with hercules
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@358 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-29 15:48:43 +00:00
timecop@gmail.com d442c9dfb6 initial pass at gpio cleanup. removed almost all dependency on stdperiphlib (remaining exti).
slightly modified initial pin configuration, but this needs rework soon anyway.
couple spacing/line ending/formatting fixes in sonar driver file while fixing gpio there.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@357 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-29 14:09:54 +00:00
timecop@gmail.com 4bd505972d renaming of serial bool returning vars into isFoo(), also fixed bool returned as uint16_t type
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@354 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-25 07:09:47 +00:00
timecop@gmail.com 539f2cb6db acctrim was broken because changes were never getting saved.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@353 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-22 09:11:41 +00:00
timecop@gmail.com c4a1c57b91 careful flight testing may commence
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@351 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-20 01:17:20 +00:00
timecop@gmail.com 82130ca60f amazing patch from jef78m for cli set
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@350 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-06-20 01:15:42 +00:00
timecop@gmail.com 3f8fc1b509 oops, this is NOT ready for public consumption yet.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@305 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-05-02 14:17:05 +00:00
timecop@gmail.com c26603dd72 some more minor updates from 2.2
added variable for gyro_cmpfm factor (mag) to configurables
changed gyro_cmpf factor to 600 (higher gyro influence)
got rid of GYRO_INTERLEAVE stuff (didn't work, obsolete)
got rid of applyDeadband hacks, invsqrt hacks, and other shit. ifdef'd original baseflight attitude/heading calcs w/new 2.2 routines
fixed cockup in altitude calculation w/applyDeadband
remaining: GPS

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@304 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-05-02 14:07:52 +00:00
timecop@gmail.com bba9bc291f added some more configurable frobs to cli. commit before 2.2 merge.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@288 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-03-11 06:18:20 +00:00
timecop@gmail.com 600f50ecac added MSP_UID patch from cGiessen
added sending cell voltages (faked) via frsky telemetry by fiendie
two additional cli commands (aux and dump) from jef79m - aux allows setting switches from command line, dump creates a copy-pasteable config which can be sent to a new board.


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@283 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-03-04 00:17:50 +00:00
timecop@gmail.com c88614046b reversed o/n meaning from previous commit to actually mean what I said :)
n = new rev (fullscale acc)
o = old rev (halfscale acc)


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@279 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-02-22 15:57:29 +00:00
timecop@gmail.com bc627783f8 removed mpu6050_scale cli since it's now autodetected.
the value is now printed in the status command, after MPU6050 as MPU6050.n = new revision, MPU6050.o = old revision.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@278 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-02-22 11:04:32 +00:00
timecop@gmail.com fc185b8e15 rewrote mpu6050 revision sensing code to match that of eMPL from Invensense.
Also changed scalefactor for acc to 256/512 to match multiwii code. untested/etc, proceed with caution.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@276 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-02-21 08:59:27 +00:00
timecop@gmail.com 4c0fe94072 further accuracy improvement for mag calculation.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@263 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-02-07 04:59:29 +00:00
timecop@gmail.com d1d6a5d5ef very nice proper magnetometer vector rotation from crashpilot1000
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@261 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-02-06 04:08:10 +00:00
timecop@gmail.com 785443789c third time's the charm (fixed + confirmed tiltmix gimbal)
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@251 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-01-16 11:11:13 +00:00
timecop@gmail.com fc4693af3a let's try this again (simple gimbal sign fix)
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@250 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-01-12 12:49:26 +00:00
timecop@gmail.com a1ac53c841 changed cpu to CBT6 in release build;
maybe fixed simplegimbal mixer;


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@249 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-01-12 08:26:24 +00:00
timecop@gmail.com bd08f337e7 Ah, finally fixed spektrum stuff. after PWM rewrite, spektrum init ended up before pwm init, so when rcReadRawFunc was assigned, it was always set to PWM. oops. Thanks to Cerberis @ irc for the patch.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@240 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2013-01-05 01:13:18 +00:00
timecop@gmail.com 006e6629f6 Added GIMBAL_MIXTILT (16) to gimbal_flags. Setting gimbal_flags=16 will use "mixed" gimbal i.e. SERVO_MIX_TILT from MultiWii. Untested, but should work(tm).
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@239 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-12-27 13:23:43 +00:00
timecop@gmail.com e7bc3cc38e oops.
spektrum support was broken, now fixed.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@238 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-12-24 14:54:37 +00:00
timecop@gmail.com af7e135d75 fix from frog32 for external adc channel allocation;
fix from mwc forum for frsky telemetry gps output

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@237 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-11-12 09:08:16 +00:00
timecop@gmail.com 12dfa8915d slight improvement to motion threshold calculation
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@234 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-27 07:34:45 +00:00
timecop@gmail.com 23acf529d7 implemented using one of RC inputs as ADC channel for power meter.
added MSP_ACC_TRIM stuff for android GUI.


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@231 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-19 02:43:27 +00:00
timecop@gmail.com e59f639951 made gyrodiff for motion detection configurable, 0 = disabled
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@230 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-14 00:34:23 +00:00
timecop@gmail.com 0976133f1f added acc_trim stuff into cli
spacing/indentation fixes
flyingwing is somewhat supported, reflect that in comment
added anti-moron gyro calibration routine... if model is getting moved while its arming... don't calculate gyro avearage because its gonna be wrong... example of fail see here: http://www.rcgroups.com/forums/showthread.php?t=1749966

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@229 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-13 12:08:56 +00:00
timecop@gmail.com 9fc43d5357 fixed MPU6050 sig stuff, d'oh
added sensor axis orientation stuff to cli... not the most optimal way but surely one that uses least code, lol!

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@228 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-08 13:50:48 +00:00
timecop@gmail.com 021b486916 added ability to swap sensor axises dynamically. still needs a sane way to configire in CLI, though.
adjusted all drivers for the new align stuff.
commented out default config setting values to zero - memset already did that.


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@227 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-07 18:03:42 +00:00
timecop@gmail.com 193902079c moved some readonly strings to flash, thanks zyp
cleaned up frsky telemetry a bit with verbose telemetry ID names, changed loop timing a bit, added output for heading and voltage (when vbat is enabled). telemetry stuff is untested, so someone try it out.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@226 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-07 14:58:12 +00:00
timecop@gmail.com 005308b430 Applied patch from trunet for running at 64MHz off HSI for broken Chinese kcopter clones
status in cli now prints cpu MHz, 72 when running off crystal, 64 when running off intrc.
corrected WHO_AM_I check for mpu6050 when it's used on alternate address (AD0 high).
corrected PWM driver to consider CPU clock for timer prescalers - now things properly work below 72MHz
added a neat hack for pitch angle calculation so that it's not affected when roll reaches 90deg
added proper math for vector rotation instead of small-angle approximation

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@225 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-10-06 14:40:24 +00:00
timecop@gmail.com 4a4c0d585d sign error in HEX6P mix.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@224 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-23 11:41:02 +00:00
timecop@gmail.com 1dea2b3b3b integrated tommie's eeprom sanity check. much less chances of new firmware screwing up due to old config version.
fixed pwm init for airplane mode mistakenly deleting motors from the mix. flyingwing should really work now.
removed led debug from althold


git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@223 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-21 04:12:17 +00:00
timecop@gmail.com 9d5bfdb60b forgot to add lpf_for_velocity into tunables for new althold
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@222 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-20 01:47:22 +00:00
timecop@gmail.com 2544c290ae enabled mahowik althold by default. let the users figure it out.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@220 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-19 11:14:12 +00:00
timecop@gmail.com 817eb09b8a fixed bug in soft_i2c driver (doesnt affect anyone except testing)
added VAR_FLOAT to cli - now allows setting/printing float vars
fixed newlines in pwm driver
exported new althold tunables to cli (some are floats) - still not enabled by default until I know it works

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@219 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-18 13:29:35 +00:00
timecop@gmail.com f3ce558871 flying wing servo output fix
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@218 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-12 10:39:30 +00:00
timecop@gmail.com a139b96de6 fixed bug with MTK init - stuff was sent without delay while changing baudrates, and it would wreck stuff - changing rate mid-buffer. oops. should work now.
git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@216 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-12 02:15:14 +00:00
timecop@gmail.com 70884d69d5 bring back flying wing w/all configuration options
config version bumped, settings cleared.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@213 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-09 11:35:35 +00:00
timecop@gmail.com b94c13b1c5 allow using GPS in PWM input mode. This (obviously) reduces number of available channels by 2.
I heard thats not a problem since tarduino only allows 4RC+2AUX channels anyway! If you want more, upgrade to PPM.
So you use RC3/4 for GPS, and connect the rest of the channels as usual. Channels used for GPS uart are
skipped, so no changes to 'map' are necessary. Simply connect in order.

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@212 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-08 12:53:55 +00:00
timecop@gmail.com 4ed57b2696 fix for airplane pwm mode - variable wasn't initialized, resulting in non-working motors on some compilers.
synced angle/horizon mode stuff from mwc. no idea what it does.
perhaps the most important part of this update:
-errorAngle = constrain(2 * rcCommand[axis] - GPS_angle[axis], -500, +500) - angle[axis] + cfg.angleTrim[axis];
+errorAngle = constrain(2 * rcCommand[axis] + GPS_angle[axis], -500, +500) - angle[axis] + cfg.angleTrim[axis];
(which means GPS might actually work).

git-svn-id: https://afrodevices.googlecode.com/svn/trunk/baseflight@209 7c89a4a9-59b9-e629-4cfe-3a2d53b20e61
2012-09-08 08:15:16 +00:00