Paul Rogalinski
14fc5dd786
Windows dev env: setup & building
2014-12-14 18:59:30 +01:00
Dominic Clifton
562cd6c3bd
Merge pull request #211 from UKTamo/patch-1
...
Update Display.md
2014-12-14 11:13:49 +00:00
Dominic Clifton
93afc46a4c
Merge pull request #217 from Akfreak/patch-2
...
Update Board - Sparky.md
2014-12-14 11:13:19 +00:00
Akfreak
2467e96676
Update Board - Sparky.md
...
I was confused by the USB VSP ( Virtual Serial Port) at the bottom. I believe you meant USB VCP correct?
2014-12-13 19:38:06 -08:00
Dominic Clifton
d8b5f6c60c
GPS - Add satellite strength bargraphs to OLED display.
2014-12-13 21:58:54 +00:00
Dominic Clifton
e8dbb77db5
UART1 - Fix interrupt race condition which resulted in UART randomly
...
stopping transmission of data.
2014-12-13 19:45:02 +00:00
Dominic Clifton
9cc7a5aab1
DISPLAY - Skip GPS page if GPS is not enabled.
2014-12-13 19:40:19 +00:00
Dominic Clifton
9bcc0acd18
DISPLAY - Only compile in GPS page if GPS is enabled.
2014-12-13 19:37:27 +00:00
Dominic Clifton
f78b80fe01
GPS - Update UBOX auto-configure to use Pedestrian navigation mode.
...
"Applications with low acceleration and speed, e.g. how a pedestrian
would move. Low acceleration assumed. MAX Altitude [m]: 9000, MAX
Velocity [m/s]: 30, MAX Vertical Velocity [m/s]: 20, Sanity check type:
Altitude and Velocity, Max Position Deviation: Small"
2014-12-13 18:16:03 +00:00
Dominic Clifton
ea9633f2b1
Minor usart code readability improvement.
2014-12-13 18:05:22 +00:00
Dominic Clifton
119542a218
Avoid use of calls to the display when display not supported by the
...
target.
2014-12-13 12:08:13 +00:00
Dominic Clifton
6d1b0cec40
USART fixes based on feedback from @ledvinap.
2014-12-13 11:38:01 +00:00
Dominic Clifton
ce6582b88a
GPS - remove temporary hack for fixing the OLED page to the GPS page.
...
Fix incorrect flag usage.
2014-12-13 03:45:39 +00:00
Dominic Clifton
9b81dea320
Fix USART total bytes waiting when tx/rx buffer sizes are not equal.
...
Avoid using % operator. Allow buffer sizes that are not powers of two.
2014-12-13 03:29:24 +00:00
Dominic Clifton
27ae6fdb72
GPS - move debug code for gps OLED page around.
2014-12-13 02:19:49 +00:00
Dominic Clifton
ff9806e7a8
GPS - send UBlox SVINFO only once every 5 cycles (1hz) to reduce load on
...
the FC.
2014-12-13 02:15:53 +00:00
Dominic Clifton
62134057f0
GPS - handling incoming data as soon as possible to avoid observed GPS
...
packet loss.
2014-12-13 01:45:48 +00:00
Dominic Clifton
31ba3b7c94
SPARKY - Support GPS.
...
GPS tested on USART1 concurrently with SUMD on USART2, MSP on USART2 and
MSP on USB. All working as expected.
2014-12-13 01:44:47 +00:00
Dominic Clifton
1c8416db2c
GPS - handle data loss occurs in the start of a UBLOX frame
2014-12-13 01:42:35 +00:00
Dominic Clifton
20f32d632c
GPS - differenciate between timeouts and crc errors. Improve packet
...
logging. Cleanup UBLOX packet parsing.
2014-12-12 18:26:38 +00:00
Dominic Clifton
34385041ad
GPS - Update documentation.
2014-12-12 18:23:57 +00:00
Dominic Clifton
6610a91ce0
Optimize uart buffer counter incrementing.
2014-12-12 18:23:40 +00:00
Dominic Clifton
39f9b799d3
GPS - quick hack to parse the received GPS data and update the OLED
...
display in GPS passthough mode.
2014-12-12 17:04:33 +00:00
Dominic Clifton
1d5c2fb13e
GPS - fix ubox maximum packet size comparisons. Increase UBlox buffer
...
size to work with Glonass MSG-SVINFO packets. Skip data from packets
that are too large to process without attempting to process a large
payout as packet data. Ignore GPS presence check when enabling
passthrough mode so that it is possible to configure a GPS unit via the
FC without the GPS unit actually having communicated to the FC first.
2014-12-12 16:32:26 +00:00
Dominic Clifton
e8cba5bfb6
GPS - more documentaiton updates.
2014-12-12 16:26:41 +00:00
Dominic Clifton
ad9a2d2833
Update serial port irq handlers so they avoid the % operator.
2014-12-12 16:23:44 +00:00
Dominic Clifton
d8127f65ad
GPS - adding some documentation.
2014-12-12 16:22:33 +00:00
UKTamo
b862329897
Update Display.md
2014-12-12 15:13:40 +00:00
Dominic Clifton
6ce288063e
GPS - Add packet logging to the OLED display. Allow autobauding to be
...
enabled/disabled via cli (disabled by default now). Fix missing rate
configuration for UBLOX SVINFO which would have resulted in missing
satallite counts.
2014-12-12 14:43:59 +00:00
Dominic Clifton
8345401ff2
GPS - Demystify some magic numbers.
2014-12-12 14:41:49 +00:00
Dominic Clifton
be1367059d
GPS - cleanup nagivation reset flag usage.
2014-12-11 18:02:12 +00:00
Dominic Clifton
0b23afec8e
GPS - adding a fixme regarding 'ap_mode' variable.
2014-12-11 17:47:55 +00:00
Dominic Clifton
78f7a35f4f
GPS - minor code readability improvements.
2014-12-11 17:20:29 +00:00
Dominic Clifton
2778ad0c5d
Fix gps error counter so that it is meaningful, it was being reset each
...
time the gps unit was reinitialised leading users to think there were no
GPS errors.
2014-12-11 16:31:14 +00:00
Dominic Clifton
80acc39a46
GPS page on the display to aid GPS outdoor testing.
2014-12-11 15:41:18 +00:00
Dominic Clifton
237ce4ba5b
Reset navigation if sat count is too low.
2014-12-11 15:40:14 +00:00
Dominic Clifton
23ef786f91
SPARKY - Adding note regarding the TauLabs bootloader.
2014-12-10 16:58:23 +00:00
Dominic Clifton
f61a92d2b3
SPARKY - Adding documentation.
2014-12-10 16:54:44 +00:00
Dominic Clifton
a7e128e684
SPARKY - PWM output on PWM1-10.
2014-12-10 16:26:00 +00:00
Dominic Clifton
b3f74fb1a3
SPARKY - Use RX_PPM by default.
2014-12-10 15:01:54 +00:00
Dominic Clifton
6a5ed737f7
STM32F30x - Fix GPIO initialisation.
...
Closes #154
2014-12-10 12:48:20 +00:00
Nicholas Sherlock
e47a82add8
Version 0.1.2
2014-12-10 15:35:49 +13:00
Nicholas Sherlock
5cc3ad3da7
New encoding for PID I terms which saves 2 bytes per frame
2014-12-10 15:35:36 +13:00
Dominic Clifton
334ff322f6
SPARKY - Update UART2 configuration.
...
UART2 RX working using SumD.
2014-12-09 16:29:59 +00:00
Dominic Clifton
d34d5ceef2
STM32F30x - Allow overriding of USARTx GPIO pins from target.h.
...
USART1 RX/TX now working on Sparky.
2014-12-09 14:58:56 +00:00
Dominic Clifton
b2529620f7
STM32F30x - Fix uart3 pinsource definitions
...
UART3 RX/TX working on sparky.
2014-12-09 14:39:48 +00:00
Nicholas Sherlock
e492aa6a39
Add (untested) support for recording Tricopter tail servo position
2014-12-09 17:27:56 +13:00
Dominic Clifton
27b7df2996
Fix comments in system startup files.
2014-12-09 03:18:11 +00:00
Dominic Clifton
6c96b8dd86
Support the Sparky board by peabody124 - work in progress, not flight
...
ready.
https://github.com/TauLabs/TauLabs/wiki/Sparky
http://buildandcrash.blogspot.co.uk/2013/05/sparky-testing-and-building-no-crashing.html
2014-12-09 03:12:38 +00:00
Dominic Clifton
fed6df275f
Add MPU9150 driver.
...
This is a almost a complete clone of the 6050 - needs cleanup and
de-duplication.
2014-12-09 03:12:37 +00:00