Echelon9
e7d4f7da7f
Remove duplicated -mfpu=fpv4-sp-d16 under cortex-m4 based targets.
2015-08-19 23:11:02 +10:00
Dominic Clifton
5b236a8133
Fix flash size for SPRACINGF3.
...
Note: Only early prototypes had the smaller flash.
2015-08-05 02:52:33 +01:00
Michael Hope
f792ffa2e6
build: add a target for flashing via st-flash.
...
This makes developing against Discovery boards easier.
Signed-off-by: Michael Hope <mlhx@google.com>
2015-07-19 15:52:15 +02:00
Dominic Clifton
676b2dd6c0
Use the define USE_FLASH_M25P16. Only USE_FLASHTOOLS for some
...
development targets.
2015-07-13 03:28:34 +01:00
Dominic Clifton
e48e50512e
Merge pull request #1028 from borisbstyle/dterm_filter
...
Selective Software Filtering (Gyro, Dterm, Pterm)
Thanks for the code boris and thanks to everyone else for their testing and feedback
2015-06-29 16:00:49 +01:00
Michael Hope
41c0a7c262
build: use the first serial port for flashing.
...
Use wildcard to list all of the USB serial ports. Pick the first.
This is useful on my machine as the board sometimes appears as
/dev/ttyUSB1.
Signed-off-by: Michael Hope <mlhx@google.com>
2015-06-29 04:16:47 +01:00
borisbstyle
10f2d35759
Soft Filtering (Gyro, Dterm, Pterm)
...
pterm_cut_hz added
Let's play with this as well to get more noise filtered
Code Cleanup
Make filter more flexible for reuse
rewrite correction pterm
Define static delta in filter
Fix array count
ident
return function for filter
Filter Function enhanced
Full software filtering (DTerm, PTerm, Gyro, Acc)
Normalize Variables
Revert Back gyro settings
Bugfix gyro/acc filter // (MPU60xx equalize lpf settings)
Moved filtering to mw.c
This has been done to prevent reusing old cycletime for filter function.
acc_cut_hz removed (not needed)
Harakiri zero fix
2015-06-27 14:13:10 +02:00
Dominic Clifton
2436ccbaf5
SPRacingF3 - Enable Softserial on CH4/5 and CH7/8 (RX/TX).
2015-06-26 15:16:52 +01:00
Michael Hope
b26efd6256
ld: split the common linker commands out into a shared file.
...
Done to make it easier to add new sections (like a parameter registry
section) in the future.
Signed-off-by: Michael Hope <mlhx@google.com>
2015-06-22 08:49:16 +02:00
Dominic Clifton
084626a70f
SPRacingF3 - Allow use of a different external mag.
2015-06-10 03:36:53 +01:00
Dominic Clifton
4ed6fdfea5
CC3D - Add sonar.
...
This also ensures that the PWM mapping does not use the sonar pins when
sonar is enabled in a board agnostic way.
Conflicts:
src/main/config/config.c
src/main/drivers/pwm_mapping.h
src/main/main.c
src/main/target/CC3D/target.h
2015-05-22 22:35:41 +01:00
Dominic Clifton
f28158a5a7
Cleanup debug code.
2015-04-14 13:59:11 +01:00
Dominic Clifton
ef50a0648f
Allow spcification of flash size on command line.
2015-03-26 01:29:00 +00:00
Dominic Clifton
1de9fa4db6
SPRacingF3 - Add sonar support.
2015-03-22 20:55:27 +00:00
Dominic Clifton
bce6c6722c
Merge branch 'port-changes' of https://github.com/ledvinap/cleanflight into ledvinap-port-changes
...
Conflicts:
src/main/blackbox/blackbox.c
src/main/io/serial.c
2015-03-09 22:23:04 +01:00
Dominic Clifton
266fe45b7e
Temporarily disable autotune on the CC3D OPBL binary.
2015-03-02 11:50:15 +00:00
Nicholas Sherlock
af68517dda
Merge remote-tracking branch 'upstream/master' into cc3d
2015-02-28 00:19:03 +13:00
Nicholas Sherlock
451d3d7ba2
Move zigzag encoding function to new common/encoding.c file, add tests
2015-02-26 13:27:09 +13:00
Nicholas Sherlock
57fcde05a3
Blackbox dataflash: Experimental CC3D support
2015-02-25 00:52:25 +13:00
Petr Ledvina
3abcbace72
Generate phony targets in auto-dependencies
...
This will fix problem with missing dependencies where #include changes
2015-02-23 09:18:51 +01:00
Dominic Clifton
070b556a07
Enable blackbox flash logging only on SPRacingF3 and Naze rev5 targets.
2015-02-22 21:49:53 +00:00
Dominic Clifton
2f09b7d1d9
Merge branch 'blackbox-flash' of https://github.com/sherlockflight/cleanflight-dev into sherlockflight-blackbox-flash
2015-02-22 17:24:39 +00:00
Dominic Clifton
9057d70410
Allow excluding of servo code at compilation time.
...
This is in preparation for backbox on CJMCU/64k.
Flight tested on CJMCU.
2015-02-22 16:21:03 +00:00
Dominic Clifton
a1b01807cf
Merge branch 'lowpass' of https://github.com/fusterjj/cleanflight into fusterjj-lowpass
...
Conflicts:
src/main/flight/mixer.c
2015-02-22 14:55:04 +00:00
Nicholas Sherlock
acd4745a4e
Merge remote-tracking branch 'upstream/master' into blackbox-flash
2015-02-15 01:54:50 +13:00
Dominic Clifton
ed51428989
SPRACINGF3 - Enable DISPLAY. Specify serial port I/O in target.h.
2015-02-05 02:08:37 +00:00
Dominic Clifton
55cac2bdeb
Finally rename flight.c/.h to pid.c/.h. Cleanup some dependencies.
...
Relocate more code.
2015-02-01 00:39:38 +01:00
Joel Fuster
ec946ea7d5
Split filter into separate file for future reuse
2015-01-31 11:46:44 -05:00
Dominic Clifton
fa18940087
Minor cleanups to allow CJMCU to build again.
2015-01-30 21:25:18 +01:00
Nicholas Sherlock
f9e22a0461
Merge remote-tracking branch 'upstream/master' into blackbox-flash
2015-01-28 20:48:17 +13:00
Nicholas Sherlock
0624eb5067
Refactor blackbox IO routines out into separate file
2015-01-28 20:42:51 +13:00
Nicholas Sherlock
3eb28f16ea
Basic read/write/erase flash functionality works from the CLI
...
Very little code coverage tested yet, only writes of small sizes
2015-01-28 17:45:36 +13:00
Michael Jakob
396731a428
Intitial support for ALIENWIIF3 target
2015-01-26 18:33:47 +01:00
Dominic Clifton
5760519a03
CC3D - Adding USB Virtual COM port suport.
...
You can now connect the configurator via the USB port.
2015-01-25 13:59:48 +01:00
Dominic Clifton
9e73dca591
CC3D - Use Flex port in I2C mode unless USART3 is used. Add I2C drivers
...
for compass, baro and display.
2015-01-22 19:19:43 +01:00
Dominic Clifton
71a61d2432
SPRACINGF3 - Use 128k flash.
2015-01-22 18:00:11 +01:00
Dominic Clifton
e69718b49a
Added missing Makefile change from
...
1a2ee0e5b9
2015-01-21 01:11:55 +01:00
Dominic Clifton
650389afb6
Disable ADC initialisation on CJMCU. Replace MASSIVEF3 with SPRACINGF3.
...
Conditional VCP code inclusion. Other minor F1/F3 cleanups.
2015-01-20 23:33:03 +01:00
Dominic Clifton
1efe530ea3
Disable compilation of unused can/cec/crc libraries.
2015-01-08 05:02:23 +00:00
Dominic Clifton
53faaff63c
Add CJMCU revision detection. Use LEDs to indicate Spektrum binding
...
activity.
2015-01-08 01:19:25 +00:00
Nicholas Sherlock
6c2ce5038c
Merge remote-tracking branch 'upstream/master'
2015-01-04 10:35:59 +13:00
Michael Jakob
2b90f675b2
Support ALIENWIIF1 as an separate target
...
This will allow to build an HEX file independently to the NAZE target
An ALIENWIIF3 may also come in the future based on STM32F303. Both
likely will share the same default settings. This is why I don’t use
ALIENWII32 as target name yet.
2014-12-28 12:45:15 +01:00
Nicholas Sherlock
dfd8e5b2b0
Merge branch 'master' of https://github.com/cleanflight/cleanflight
2014-12-26 11:56:00 +13:00
Dominic Clifton
36c0b6f106
Cleanup MPU9150 support.
2014-12-24 23:53:17 +00:00
Dominic Clifton
e9c07675be
Add MPU9150 support to STMF3Discovery. Use 7-bit I2C addressing on
...
STM32F30x.
2014-12-24 21:11:22 +00:00
Dominic Clifton
e9bc6c9353
Merge pull request #224 from GruffyPuffy/xbus
...
Added initial version of JRPropo XBUS Mode B support.
2014-12-23 12:08:23 +00:00
Nicholas Sherlock
1b1a285b4a
Syncing with Cleanflight upstream
2014-12-22 23:23:26 +13:00
Dominic Clifton
183c5f8e16
Add MPU9150 mag support and mag autodetection. Add AK8975 mag driver.
...
Note: not working on the sparky, MPU9150 needs passthough enabling but
when enabled the mag and gyro won't ack on the default addresses. Needs
further investigation.
2014-12-21 23:40:48 +00:00
Nicholas Sherlock
c85a172370
Merge remote-tracking branch 'upstream/master'
2014-12-18 18:17:59 +13:00
Stefan Grufman
509f73853d
Added initial version of JRPropo XBUS Mode B support.
2014-12-15 22:15:47 +01:00