rusefi
/
speeduino
mirror of https://github.com/rusefi/speeduino.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Commit Graph

  • 7818d418d4 Minor performance tweaks to Nissan 360 master Josh Stewart 2017-03-01 16:53:29 +1100
  • 22af95db32 Seemingly working Nissan 360 decoder (4 and 6 cylinder) Josh Stewart 2017-03-01 16:17:30 +1100
  • 4e3760057c Define correct pin mask/ports for the primary trigger Josh Stewart 2017-03-01 14:45:23 +1100
  • bfd62bcff2 Remove MK20 schedule definition (Use generic TEENSY def) Josh Stewart 2017-03-01 14:44:25 +1100
  • 88e412bcf6 Teensy idle code Josh Stewart 2017-03-01 14:42:24 +1100
  • 26a6945856 Consistency improvements to Audi135 and 4G63 decoders Josh Stewart 2017-03-01 10:30:23 +1100
  • 707d65cac8 Shuffle around memory to make upgrades simpler Josh Stewart 2017-02-26 16:33:03 +1100
  • 16cfe02533 Revised v0.4.2 schematic to fix incorrect labels. Cleanup of folders for v0.4 Josh Stewart 2017-02-24 08:32:46 +1100
  • 79323b197f Revised v0.3.5 schematic + images. Fixed 1resistor reference in BOM Josh Stewart 2017-02-23 11:14:07 +1100
  • 7d8d02ab8a Additional of v0.3.5 design files (Including BOM) Josh Stewart 2017-02-22 17:03:24 +1100
  • 2e5a45463b Additional default pins to prevent weirdness on upgrades Josh Stewart 2017-02-21 16:51:50 +1100
  • b7aacc6040 Add some ground work for Teensy inj and ign channels 5-8 Josh Stewart 2017-02-20 21:34:28 +1100
  • 4f5d1afdae Add more part numbers (Teensy adapter) Josh Stewart 2017-02-20 17:58:28 +1100
  • 0d055dc7f1 Allow min and max duty cycles for closed loop idle and boost Josh Stewart 2017-02-20 17:57:46 +1100
  • a881ddc405 Temporarily disable ADC interrupt until the bug with it is found Josh Stewart 2017-02-15 22:20:43 +1100
  • f6818adecc Faster responding boost PID Josh Stewart 2017-02-15 16:51:01 +1100
  • a7d0a95611 Use currentStatus.spark rather than currentStatus.engine for error indicator. Fixes #67 Josh Stewart 2017-02-14 15:21:38 +1100
  • 0ae02e23f1 Minor cleanups or warnings and error (from last commit) Josh Stewart 2017-02-14 01:07:05 +1100
  • 650a096175 Initial (untested) commit of Nissan 360. ONLY support 4 cylinder so far Josh Stewart 2017-02-12 18:35:18 +1300
  • 91512b775a Very weak filter added to instantaneous MAP readings Josh Stewart 2017-02-12 14:43:18 +1300
  • 667e80dc26 Add boost target to log Josh Stewart 2017-02-12 14:31:37 +1300
  • bec06bca3a Improve calculation speed of boost control Josh Stewart 2017-02-11 22:33:07 +1300
  • b8fec27bc0 Swap incorrect boost and VVT pin assignments Josh Stewart 2017-02-09 21:51:18 +1100
  • ced30ce3a7 Remove PSI Boost option from TS Josh Stewart 2017-02-09 14:26:21 +1100
  • 0fc212ec11 Remove all traces of PSI based boost targets Josh Stewart 2017-02-09 14:24:07 +1100
  • 4ca8205591 More MAP sanity settings Josh Stewart 2017-02-09 14:22:57 +1100
  • 7db51bd416 Sanity checks on the average MAP calculation Josh Stewart 2017-02-09 14:17:20 +1100
  • 74137338e5 February dev signature Josh Stewart 2017-02-09 09:54:25 +1100
  • 8b4008ce27 Extremely early stm32 work Josh Stewart 2017-02-08 15:40:44 +1100
  • 279893f580 Remove some old display code that is no longer used Josh Stewart 2017-02-08 15:28:27 +1100
  • c555bbc060 Move to PlatformIO for project layout Josh Stewart 2017-02-06 20:56:46 +1100
  • b2ca13c9aa Merge pull request #64 from Autohome2/can-io Josh Stewart 2017-02-05 21:42:33 +1100
  • 76b6e26aca Move Serial begin statements until after config is loaded Josh Stewart 2017-02-02 17:45:41 +1100
  • dd92c40af4 Base tune and signature for Jan 2017 Josh Stewart 2017-02-01 17:42:11 +1100
  • 3e24f60a95 Merge pull request #63 from ConnerMcLaughlin/master Josh Stewart 2017-01-30 20:16:35 +1100
  • 294192c52c Merge branch 'master' into master Josh Stewart 2017-01-30 20:13:33 +1100
  • 13142c1477 Add macro for round up/down integer division Josh Stewart 2017-01-30 17:11:13 +1100
  • 23c3c8b6bf Formatting cleanup Josh Stewart 2017-01-30 17:10:17 +1100
  • 425ec75828 Remove selectable pin options from being on pins 1/2 (Comms pins) Josh Stewart 2017-01-28 08:39:10 +1100
  • 153aa32fb4 Faster 2nd derive prediction on RPM / crank angle Josh Stewart 2017-01-27 22:20:38 +1100
  • 9011c190e0 Fix for fan hysteresis not operating correctly Josh Stewart 2017-01-27 16:38:52 +1100
  • 656fc8b77a added page 10 , a 128byte page for use with upcoming CANBUS integration. darren siepka 2017-01-26 22:58:21 +0000
  • 73d387887c Merge pull request #26 from noisymime/master Autohome2 2017-01-25 23:49:27 +0000
  • 17cc712326 Considerably better rpmDOT (rpm/s) calculation. Faster and more accurate Josh Stewart 2017-01-25 11:10:12 +1100
  • ad825c2051 Allow for use of negative advance (i.e. ATDC) values for launch Josh Stewart 2017-01-21 12:58:45 +1100
  • 5379de5736 Fix for misaligned Y axis memory Josh Stewart 2017-01-21 10:38:40 +1100
  • af5a569283 Minor pin binding changes Josh Stewart 2017-01-19 20:58:23 +1100
  • dfab13631a Some default pin mappings for VVT and Boost Josh Stewart 2017-01-19 15:02:10 +1100
  • 770da8b43e Selectable boost and VVT pins Josh Stewart 2017-01-19 14:54:07 +1100
  • f08ec585e6 Move injector / ignition control functions into their own file Josh Stewart 2017-01-19 11:34:33 +1100
  • ff87a17ce0 Further C compliance work Josh Stewart 2017-01-19 11:31:05 +1100
  • 2ee0a91c0b BIG cleanup of #includes to be more C compliant Josh Stewart 2017-01-18 17:37:55 +1100
  • 4c1c9a051e Slightly improved flat shift / launch logic Josh Stewart 2017-01-18 13:20:04 +1100
  • da3f460152 Don't cutoff the decimal values of afrTarget in data logs Josh Stewart 2017-01-18 10:24:20 +1100
  • 9d7ca71e3f Complete (untested) flat shift Josh Stewart 2017-01-17 15:09:41 +1100
  • 109f64f342 Memory allocation and TS interface for flat shift Josh Stewart 2017-01-17 13:33:41 +1100
  • 0e176f0724 Enable MAP load values up to 511 Josh Stewart 2017-01-17 10:51:53 +1100
  • 0aa6035aec Storage changes to allow for MAP value up to 511 kpa Josh Stewart 2017-01-16 22:14:07 +1100
  • 6b368e998d Add more pressure gauge options (PSI, inhg) Josh Stewart 2017-01-16 14:41:40 +1100
  • 9aad63ec7c Revised MX5 PNP board files Josh Stewart 2017-01-16 13:49:59 +1100
  • e58ad87ed2 Add check to prevent potential crash when switching IAC methods (Teensy) Josh Stewart 2017-01-12 22:33:26 +1100
  • f53cb2e729 Remove old tach code Josh Stewart 2017-01-12 21:57:04 +1100
  • 80c46a74e3 Cleanup some compile warnings Josh Stewart 2017-01-11 18:30:46 +1100
  • 5835c3c704 Schematic and board images for Teensy adapter Josh Stewart 2017-01-11 18:11:31 +1100
  • 49e0ba1f65 Enable ignition channel 5 on Teensy (Prevent compile error) Josh Stewart 2017-01-11 17:38:59 +1100
  • 83114b4c76 Enable AVR watchdog timer Josh Stewart 2017-01-11 17:31:23 +1100
  • 1b27436ed8 Initial commit of Teensy adapter board Josh Stewart 2017-01-08 21:35:15 +1100
  • 6931233475 Gerbers for v0.4.3 Josh Stewart 2017-01-07 15:49:13 +1100
  • efc7f024fe Design files and BOM for v0.4.3 board Josh Stewart 2017-01-07 10:13:13 +1100
  • 43da7bf9b8 Experimental new tacho output method Josh Stewart 2017-01-06 17:30:22 +1100
  • 251000893c Jan 17 dev signature Josh Stewart 2017-01-06 08:26:11 +1100
  • 7d70f688aa Signature and base tune for Dec 2016 release Josh Stewart 2017-01-05 17:20:54 +1100
  • 7a87363618 Add MAP x RPM variable to datalog Josh Stewart 2017-01-04 22:34:25 +1100
  • b1658d1c40 Minor tweaks to ethanol logic Josh Stewart 2017-01-03 15:07:22 +1100
  • 6c17cde092 Better AE curve range Josh Stewart 2017-01-01 19:56:18 +1100
  • 7ef0ae966b Better filter options for 4g63 Josh Stewart 2017-01-01 19:56:04 +1100
  • 7cf7ff3f65 Allow very low trigger angle settings on Basic Distributor Josh Stewart 2016-12-31 09:32:17 +1100
  • 1b910f7d03 Corrected RPM reading for 5 cylinder with Basic Distributor Josh Stewart 2016-12-31 08:54:06 +1100
  • 1dcc62ed5e Move to new ignition corrections system Josh Stewart 2016-12-30 08:32:22 +1100
  • a80ff171f5 Actually remember to allow 5 cylinder selection in TS Josh Stewart 2016-12-29 08:46:20 +1100
  • 619428b43a Missed line from 5 cylinder commit Josh Stewart 2016-12-28 22:54:15 +1100
  • 65d6cdd9e9 Complete but experimental 5 cylinder support Josh Stewart 2016-12-28 22:52:00 +1100
  • f181bce3af Global injector closing angle global var ConnerMcLaughlin 2016-12-27 13:41:18 -0600
  • 6ac8807399 Global injector closing angle TS setting ConnerMcLaughlin 2016-12-27 13:35:46 -0600
  • bd6fb72ae2 Global injector closing angle ConnerMcLaughlin 2016-12-27 13:33:27 -0600
  • b5b5155bf8 Fix memory misalignment introduced in 48712c12fa Josh Stewart 2016-12-27 19:31:57 +1100
  • b2c0e0a902 Correct packetSize of comms Josh Stewart 2016-12-27 17:03:27 +1100
  • 12ea4b1587 Minor work on the Teensy adapter board Josh Stewart 2016-12-27 16:09:44 +1100
  • b3a04cc19b Expose some pieces of flex info to TunerStudio Josh Stewart 2016-12-26 20:53:37 +1100
  • 173f875868 Prevent overdwell protection stopping fixed timing from working as well as it could Josh Stewart 2016-12-26 20:38:38 +1100
  • 6f6f3eb216 Tentative working cam speed missing tooth Josh Stewart 2016-12-23 21:46:34 +1100
  • 48712c12fa Add settings to select pins for fuel pump and fan Josh Stewart 2016-12-21 13:21:27 +1100
  • 0a1a390a98 Part number updates in v0.3 and v0.4 BOMs Josh Stewart 2016-12-19 09:46:19 +1100
  • 228d4e898c Files for PVT4 of the NA6 Pro board Josh Stewart 2016-12-15 21:55:21 +1100
  • 25111fc927 Slightly revised v0.4.2 schematic Josh Stewart 2016-12-12 23:41:55 +1100
  • 9889a1ff18 December dev signature Josh Stewart 2016-12-11 23:48:41 +1100
  • ad52690101 Experimental new stepper homing method Josh Stewart 2016-12-11 23:23:54 +1100
  • 4d18ee7911 Addition of common ignition corrections routine Josh Stewart 2016-12-11 22:51:04 +1100
  • 397fb56445 Remove 2 default values that aren't used any more Josh Stewart 2016-12-11 22:49:48 +1100
  • cc6b036105 November base tune file Josh Stewart 2016-12-05 20:48:32 +1100