e6fa57db87
Starter is engaged on start-up in pull-up configuration #1969
...
maintainability
2020-11-20 00:18:38 -05:00
7c793834ef
Launch control unit tests update ( #1972 )
...
* testable launch start
* extract base class
* add a test
* fix ts debug
* Launch control unit_tests
updated launch control for a better split
VSS mock for unit tests
Co-authored-by: Matthew Kennedy <matthewkennedy@outlook.com>
2020-11-19 21:14:38 -05:00
f3b7a1d9da
Remove lockAnyContext, replace with CriticalSectionLocker ( #1938 )
...
* switch to CriticalSectionLocker
* that's just about all
* clean up last usage
* include hpp for sim
* need the cpp wrappers in the makefile too
* include dir
* include
2020-11-19 06:56:02 -05:00
47fbb92bff
Starter seems to be engaged forever fix #1965
2020-11-18 23:54:30 -05:00
905d740b4b
Starter seems to be engaged forever #1965
2020-11-18 22:45:37 -05:00
4e94324e4f
Starter seems to be engaged forever #1965
2020-11-18 21:45:17 -05:00
8241b0aef6
consolidate to common ( #1962 )
2020-11-18 16:22:19 -05:00
5d3d85d644
put getTimeNowLowerNt in to mpu_util ( #1950 )
...
* put getTimeNowLowerNt in to mpu_util
* move GPTDEVICE to port_mpu_util
* and remove from efifeatures
2020-11-18 14:17:00 -05:00
dc3b14e5fc
better MC33816 start-up status
2020-11-18 01:07:09 -05:00
f48621e4c2
TLE8888: disable diagnostic for OUTPUT8..13 ( #1956 )
...
Enabled pull-down affects analog inputs that shares same pins.
Disable it.
DOTO: enable diagnostic if ouput requested through tle8888_setPadMode
2020-11-17 18:33:37 -05:00
4d89095890
docs
2020-11-17 08:25:50 -05:00
f9ae075ac6
read SD card config exactly once ( #1955 )
...
* only read mmc device once
* format
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-11-17 07:48:43 -05:00
6e4517be8c
adjust microsecond_timer api ( #1952 )
...
* change timer api
* don't need all that
2020-11-16 18:50:13 -05:00
5a443501fb
prevent MMC preemption by TS thread ( #1949 )
...
* prevent preemption by TS thread
* didn't need that
2020-11-15 20:44:36 -05:00
bb8650179c
consolidate EFI_UNIT_TEST and friends ( #1940 )
...
* restructure
* guard c++
* idle too
* status_loop.h
* consolidate definitions
* use 1/0 instead, check for existence
* missed a few
* dead define
* defs for bootloader
2020-11-11 20:34:39 -05:00
62f441376c
Tle8888 stepper ( #1936 )
...
* TLE8888: enable PP mode for OUT21..24 in case of useTLE8888_stepper
* Lada Kalina is a test mule for stepper idle
2020-11-10 14:16:46 -05:00
7c8521f078
debounce unintended auto-increment bug (was: Proteus TCU gear shift configuration) #1927
...
refactoring
2020-11-07 00:46:59 -05:00
ee01be3fd2
debounce unintended auto-increment bug (was: Proteus TCU gear shift configuration) #1927
...
undoing brain fart
2020-11-07 00:43:42 -05:00
7bfa18295a
Proteus TCU gear shift configuration #1927
2020-11-06 23:48:35 -05:00
3241a43a2d
extract idle hardware to its own file ( #1923 )
...
* extract idle hardware
* should fix the build
2020-11-03 18:06:32 -05:00
7de1fc8e2a
Output pin init/deinit needs a linked list #1803
...
trying to make things more consistent & smarter
2020-11-03 00:46:03 -05:00
0f5f0a549b
this stuff is just too dead
2020-11-02 23:46:41 -05:00
63c25ab8a7
Tle8888 small update ( #1908 )
...
* TLE8888: add support MR switching from SW
Main Relay has limitation - it is always active while KEY=1. When
KEY=0 MR can be switched on from SW.
* TLE8888: support reading of KEY and WAKE inputs
* Rusefi enums: add new TLE8888 pins
2020-11-01 22:19:55 -05:00
946fe5091c
remove spiMtx ( #1907 )
2020-10-25 17:26:46 -04:00
08d8262f77
oops ( #1899 )
2020-10-23 15:45:44 -04:00
8e11675afd
Tle8888 big update 1 ( #1892 )
...
* smart gpio: fix tle8888 direct pin mapping for MRE
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888
* TLE8888: cleanup
* TLE8888: do not reset driver private data on WD/undervoltage reset
* TLE8888: diagnostic updates
* TLE8888 driver: BIG driver rework
* TLE8888: check SPI answers for abnormal states
Reply with other than requested register can be a sign of:
-Power-On-Reset, then OpStat0 will be replyed
-WatchDog reset, then FWDStat1 will be replyed
-Invalid communication frame, then Diag0 will be replyed
Keep tracking last accessed register and check with the next reply.
* TLE8888: debug clean-up
* TLE8888: implement spi array write
This reduce CS inactive state time between two consequent accesses
from 8.8 uS to 1.4 uS
* TLE8888: fix PP outputs in OD mode
* TLE8888: cleanup register definitions
* TLE8888: run separate driver thread for each chip instance
Calculating poll interval for few chips become more complex, avoid
this running thread for each device.
* TLE8888: fix cypress and kinetic compilation
Both platforms define its own MAX and cause redifination error if
common.h is included in driver.
* MRE: update mapping.yaml and fix direct pin mapping for TLE8888
* TLE8888: diagnnostic: disable switch off in case of overcurrent
For all output, use current limiting instead
* TLE8888: check for overvoltage on OUT8..OUT13
* TLE8888: add TODO note about how to recover from failure condition
Currently TLE8888 automaticly recovers only from overcurrent and
(may be) overtemperature conditions.
Short to bat cause output disable (bit in OECONFIG is reset) and
needs driver/host intervention.
* TLE8888: save few bytes of RAM
* TLE8888: Lada Kalina is test mule for IDLE stepper on TLE8888
Don't forget to enable PP mode for TLE8888 outputs 21..24:
uncomment line 1087 in tle8888.c
* TLE8888: reorder code, cleanup
* TLE8888: mode all debug/statisctic to per-chip struct
* TLE8888: rework poll interval calculation
* MRE: use TLE8888 pins instead of MCU gpios that drives TLE8888 #2
2020-10-23 12:25:30 -04:00
4e249889a6
implement fuel pressure sensors ( #1897 )
...
* add
* remove old
* remove more old
* makefile
* fix init
* patch up other stuff
* actually fix it this time
* raw output channels
* gauges, UI
* scaled channel
* fix field ordering
2020-10-23 07:31:47 -04:00
e4c5ca4af0
no sd enable ( #1894 )
...
* no sd enable
* add assert
* Revert "no sd enable"
This reverts commit fd997381ee884c890fe7664e56ed2b0f0caef2ff.
2020-10-22 20:51:28 -04:00
e0bb7ad581
disable i2c, other unused features ( #1891 )
...
* dead
* more
2020-10-20 22:24:32 -04:00
51e840eaa6
code style
2020-10-19 22:47:09 -04:00
e0a5c3dc12
GDI Epic #1448
2020-10-19 22:04:06 -04:00
a68cbae0dc
Remove trigger listener list ( #1886 )
...
* avoid 64b on hot path
* no tooth log when fast
* use crit section locker
* final
* only flip pins if not also self stim
* only trace if doing work
* slightly drop lateDelay
* trace if not bailing out
* remove listener array
2020-10-17 08:00:11 -04:00
7eeb60a8a0
trigger/scheduler perf improvements ( #1885 )
...
* avoid 64b on hot path
* no tooth log when fast
* use crit section locker
* final
* only flip pins if not also self stim
* only trace if doing work
* slightly drop lateDelay
* trace if not bailing out
2020-10-16 11:04:27 -04:00
568ec91fc0
fix temp sensor & validate it ( #1879 )
...
* fix temp sensor & validate
* smaller here should work
2020-10-14 22:39:16 -04:00
2855e04234
start using BufferedWriter ( #1878 )
...
* do the part up to actual usage
* borrow some memory for now
2020-10-14 20:06:05 -04:00
dfa3e69186
GDI Epic #1448
2020-10-11 23:39:40 -04:00
c885db32f0
use expected for event queue next event ( #1859 )
...
* use expected for event queue next event
* minor cleanup
* tests
2020-10-05 13:53:34 -04:00
fb85082e01
switch ( #1839 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-10-01 01:36:33 -04:00
16bfd39bac
Remove dead & useless config ( #1834 )
...
* remove dead config
* remove enum
2020-09-29 06:34:39 -04:00
4d0b953129
switch to pass by reference ( #1832 )
2020-09-28 19:17:17 -04:00
6e5a3fbbe9
Hellen says fix cypress build ( #1818 )
...
* fix compilation
* fresh generated files
* more files
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-23 14:06:22 -04:00
181113ff17
Fix debounce ( #1814 )
...
* 1,2,4,7,9
* 6
* fix type mismatch
* change field
* comment
* Revert "comment"
This reverts commit f7ce8ed48d015490ed82d692270198817569b5a3.
* Revert "Revert "comment""
This reverts commit 99f2d5cadcbf444bf58acf9e57a6fed61355d5be.
* Revert "change field"
This reverts commit 55ec050cd947696cdffccae6b29fe48d95ab5f17.
* rename var
* comments
* use func in init
* default values
* remove redundant check
* check
* use bool
* mark false when done
* pointer
* check GPIO_UNASSIGNED
* wat
* merge carnage
* oops, accidentally downgraded submodule
2020-09-21 18:25:24 -04:00
c957541cf4
ADC progress
2020-09-21 06:10:25 -04:00
2ee9e837bb
guard against ADC buffer overrun ( #1812 )
2020-09-21 12:37:51 +03:00
33eef982d1
reorder ADC channel index #1763
...
we forgot about something
2020-09-20 14:20:08 -04:00
68012c18b7
Debounce refactor ( #1809 )
...
* 1,2,4,7,9
* 6
* fix type mismatch
* change field
* comment
* Revert "comment"
This reverts commit f7ce8ed48d015490ed82d692270198817569b5a3.
* Revert "Revert "comment""
This reverts commit 99f2d5cadcbf444bf58acf9e57a6fed61355d5be.
* Revert "change field"
This reverts commit 55ec050cd947696cdffccae6b29fe48d95ab5f17.
* rename var
* comments
* use func in init
* default values
* remove redundant check
2020-09-20 14:01:00 -04:00
8ebdf6fcdc
fix type mismatch ( #1808 )
...
* fix type mismatch
* comment
* change field
* switch to efitimesec16_t
* add typedef
* add type to configdefinition
* build
2020-09-19 17:17:44 -04:00
3d6a6398ac
Dedicated sensors for wastegate + idle position ( #1805 )
...
* config
* add sensor
* listen to new adc channels
* fix
* add gauges to TS
* add gauge values
* TS UI
2020-09-18 10:04:07 +03:00
38e38c82b5
Hellen says merge #1772 hardware.cpp
2020-09-15 15:01:31 -04:00
78b65ea8aa
Merge remote-tracking branch 'origin/master' into master
2020-09-15 14:49:01 -04:00
45c43bb6fd
porting adc_inputs.cpp (blindly) ( #1792 )
...
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-15 14:48:32 -04:00
2a1e2c53e3
proteus SD card defaults ( #1796 )
...
* proteus SD defaults
* disable serial console pins
2020-09-14 10:54:25 +03:00
97cb9f45bd
logging simplification: switch bare functions to member functions: try the second ( #1794 )
...
* first pass
* first pass
* const means we don't have to check!
* static
* test fixup
* fix sniffer
2020-09-13 11:49:25 +03:00
256a4a2637
Revert "logging simplification: switch bare functions to member functions ( #1788 )"
...
This reverts commit d941bdc5
2020-09-12 04:36:24 -04:00
893de62fe6
Merge remote-tracking branch 'origin/master' into master
2020-09-12 04:03:23 -04:00
958538e5aa
Hellen says merge #1772 adc.h
2020-09-12 04:03:11 -04:00
d941bdc502
logging simplification: switch bare functions to member functions ( #1788 )
...
* first pass
* first pass
* const means we don't have to check!
* static
* test fixup
2020-09-12 03:08:11 +03:00
337106cd24
DebounceButton A/C switch ( #1782 )
...
* change acSwitch name, add mode
* fix
* remove some adc stuff
* remove some adc stuff
* semicolon stupid
* left behind
* add readpinstate
* wrong var name
* add functions back
* fix name
* bool, not void, plus fix name
* move
* not sure what I broke
* try setMockValue
* namespace
* whoops missed one
* switch values because adc was set up for pullup
* try 5
* comment for now
* comment for now
* uncomment tests, add function to mock, add mock to efiReadPin
* fixes
* for F's sake
* if
* add defy
* pass params
* use ASSERT_TRUE/FALSE
* advance time
* remove ifdef from readPin
* try moving if
* move to separate func
* move extern
* move include
* try engine_test_helper
* am confuse
* move func to else
* include hal
* add efi prod check
* remove include
* try extern
* move include
* semicolon stupid
* move extern again
* include
* move mockPinStates
* size
* add if
* add comment
* clean on instantiation
2020-09-10 22:16:20 -04:00
dbb10e7c7d
Merge remote-tracking branch 'origin/master' into master
2020-09-09 17:25:09 -04:00
3a11ea7e31
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/Makefile
# firmware/hw_layer/smart_gpio.cpp
2020-09-09 17:19:41 -04:00
2bf3792c53
Debounce pin state function ( #1780 )
...
* add readpinstate
* wrong var name
2020-09-09 17:18:54 -04:00
a0aeeb4919
Hellen says merge #1772 smart gpio
2020-09-09 17:16:51 -04:00
e94631ad3d
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/hw_layer/digital_input/trigger/trigger_input.h
# firmware/hw_layer/hw_layer.mk
# firmware/hw_layer/ports/stm32/stm32f0/hw_ports.mk
# firmware/hw_layer/ports/stm32/stm32f1/hw_ports.mk
# firmware/hw_layer/ports/stm32/stm32f4/hw_ports.mk
# firmware/hw_layer/ports/stm32/stm32f7/hw_ports.mk
2020-09-09 16:55:27 -04:00
e1be439682
Hellen says merge #1772 helping merge - Kinetis?!
2020-09-09 16:38:18 -04:00
6e64d243da
Hellen says merge #1772 helping merge
2020-09-09 14:35:01 -04:00
07bc8100c7
Hellen says merge #1772 helping merge
2020-09-09 14:20:54 -04:00
59ecf525f5
Hellen says merge #1772 helping merge
2020-09-09 13:43:18 -04:00
500d73ef02
Hellen says merge #1772 more about ports
2020-09-09 13:39:51 -04:00
995795eeb6
Hellen says merge #1772 trigger h
2020-09-09 10:21:14 -04:00
6fdb54d0dc
Hellen says merge #1772 backup ram.h
2020-09-09 10:20:21 -04:00
ed38250fd5
Hellen says merge #1772 more about ports
2020-09-09 10:18:58 -04:00
38c4794ef0
Merge remote-tracking branch 'origin/master' into master
2020-09-09 08:58:54 -04:00
47b3ad0b9c
Hellen says merge #1772 more ports
2020-09-09 08:58:12 -04:00
729bf748eb
Hellen says merge #1772 more ports
2020-09-09 08:53:11 -04:00
0d26894154
Hellen says merge #1772 tle header
2020-09-09 08:52:14 -04:00
f5d9263ad1
switch start/stop to ButtonDebounce ( #1777 )
2020-09-09 08:22:15 +01:00
2312b0ae57
Adc improvements ( #1765 )
...
* ADC: move DMA buffer outside of AdcDevice (save few bytes)
* ADC: inlcude fast channels to debug output
* ADC: save some CPU ticks (disabled until fully tested)
* ADC: simplify
2020-09-08 17:20:55 -04:00
4ce758db88
use EFI_UNIT_TEST, add check ( #1774 )
2020-09-08 14:27:23 -04:00
cab4cd0df2
Debounce pin management ( #1760 )
...
* add linked list
* macros, and use in buttonshift
* unit_tests macros
* add extern
* add parens
* move extern
* move extern
* move buttonDebounceListHead
* move buttonDebouncePointerHead
* merge gore
* undo
* reduce unused size
* don't store pointer if already initialized
* few changes
* remove oldPin
* fix merge conflict
* merge in changes commited to wrong branch
* fix definition
* out of class?
* brute force programming
* fix few problemos
* am confuse
* am confuse
* am confuse
* am confuse
* oldPin snuck in
* move to public?
* define again
* try constexpr
* def in cpp
* remove constexpr
* fix def
* fix?
* update active
* fix a few things
2020-09-08 11:29:38 -04:00
9bea1190a4
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/algo/engine_configuration.cpp
2020-09-07 15:55:43 -04:00
c4cbdf0d77
Hellen says merge #1772 ADC flexibility
2020-09-07 15:50:37 -04:00
279482a298
Hellen says BOARD_DRV8860_COUNT
2020-09-07 15:38:34 -04:00
f33b3eda8a
Merge remote-tracking branch 'origin/Hellen_fork_point' into master
...
# Conflicts:
# firmware/controllers/algo/engine.h
# firmware/hw_layer/drivers/drivers.mk
# firmware/hw_layer/stepper.h
# firmware/integration/rusefi_config.txt
# firmware/tunerstudio/rusefi.input
# simulator/simulator/efifeatures.h
2020-09-07 15:02:11 -04:00
6a3d212370
Hellen says merge #1772
...
Hellen says stepper
(cherry picked from commit a2f26ac99b
2020-09-07 14:45:41 -04:00
a88e142df0
Hellen says misc
...
(cherry picked from commit 2390c3ae2b
2020-09-07 14:43:12 -04:00
a2f26ac99b
Hellen says merge #1772
...
Hellen says stepper
2020-09-07 14:41:04 -04:00
2390c3ae2b
Hellen says misc
2020-09-07 14:09:00 -04:00
38f480741f
Hellen says drivers
...
(cherry picked from commit 02573713f3
2020-09-07 12:02:40 -04:00
0aa76da9f2
Hellen says ports
...
(cherry picked from commit 4acea75cc8
2020-09-07 12:02:34 -04:00
02573713f3
Hellen says drivers
2020-09-07 12:00:16 -04:00
4acea75cc8
Hellen says ports
2020-09-07 11:57:20 -04:00
7d0c8b4870
microRusEFI used as Body Control Module BCM BCU
...
got stack too low warning with DBG_CAN
2020-09-06 21:45:17 -04:00
1f6b820a96
microRusEFI used as Body Control Module BCM BCU
2020-09-06 21:30:14 -04:00
39d09bc976
microRusEFI used as Body Control Module BCM BCU
2020-09-06 20:21:01 -04:00
0e14e51179
reorder ADC channel index ( #1763 )
...
* change config
* correct logic
* clearing these no longer needed
* test expected this to be set
2020-09-06 18:25:26 -04:00
95798a5246
fix broken master, inject engine ptr to rpmcalculator ( #1759 )
...
* fix
* oops
2020-09-05 18:49:42 -04:00
ca21d5b4c2
refactoring
2020-09-03 19:29:15 -04:00
499a430347
[TCU] GearController and TransmissionController base classes ( #1749 )
...
* add tcu ts outputs
* accidental change?
* add tcu base classes
* rearrange
* accidental change?
* add files
* missing backslash
* undo accidental change
* buttonshift includes, targets, and init
* Revert "buttonshift includes, targets, and init"
This reverts commit 1b0630511e1948f3d330d74be5bff6c087f118fb.
* use unused bit
* add return documentation
Co-authored-by: rusefillc <48498823+rusefillc@users.noreply.github.com>
2020-09-02 15:39:50 -04:00
182747e907
Adc cleanups ( #1743 )
...
* ADC: remove ADC_TwoSamplingDelay*
1. it is related to double or triple interlived mode only
2. it should be writen to CCR register, not CR1
* ADC: use designated initializers
2020-09-01 07:38:35 -04:00
5fc1b6902c
fix #1740 the right way ( #1741 )
...
* fix
* put that back
2020-08-31 21:05:04 -04:00
e3b41c2387
dead code
2020-08-31 20:52:25 -04:00
12efd2f6be
generated for pt2001 ( #1666 )
...
* generated for pt2001
* don't unicode
2020-08-30 15:38:56 -04:00
e1e9e2caf0
Mc33 ucode ( #1734 )
...
* mc33 flash check
* DI sanity checks for setting HV config
* mc33816 microcodee source code update for what we got running on the r0.4 board w/ pt2001
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-08-29 22:24:11 -04:00
2971230711
VVT support for VAG trigger #883
2020-08-29 18:13:00 -04:00
94daeb7922
OBD CAN sensors #1733
2020-08-29 14:36:23 -04:00
1a55085bb6
Software knock detection ( #1730 )
...
* s
* science
* set pin mode
* turn stuff off so it fits
* filtering maybe
* filtering actually works
* generate filter parameters internally
* shorter window
* guard behind enable flag
* use checked in filter
* add biquad reset
* tracing
* const
* exec order
* do it from a thread
* smaller buffer, comment
* configure with header
* only for proteus
* oops
* unused
* not needed
* guards
* pin config
* don't need that include
* precook filter steady state
* define sample rate
* config enable switch
2020-08-28 21:13:50 -04:00
7867e83e43
VVT support for VAG trigger #883
2020-08-24 02:01:50 -04:00
938f40cbef
more fixing build?
2020-08-21 22:07:55 -04:00
733008b9d0
Analog input filtering ( #1680 )
...
* improve biquad
* cleanup
* add filtering to subscriptions
* config sensors
* comment
* doesn't need to be that fast
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-08-21 19:47:12 -04:00
add49b0a5c
bugfix - PPS second channel was not initialized
2020-08-19 00:46:57 -04:00
068f21c616
vss_exti untested
2020-08-13 18:27:31 +03:00
f04149b489
disable trigger_hw_input should work for PAL and VVT
2020-08-09 00:20:01 -04:00
ba62727c25
trigger and VSS hw integrated testing #1668
2020-08-08 18:28:43 -04:00
512d7c2c49
TS SD integration #1653
2020-08-07 17:20:16 -04:00
3b8525b521
TS SD integration #1653
2020-08-07 16:37:36 -04:00
a8ba5311f2
TS SD integration #1653
2020-08-07 16:27:21 -04:00
6efcd3a474
TS SD integration #1653
2020-08-07 15:53:11 -04:00
cc35325eb7
TS SD integration #1653
2020-08-07 15:01:25 -04:00
8764693179
TS SD integration #1653
2020-08-07 00:59:00 -04:00
8192247175
TS SD integration #1653
2020-08-06 23:34:47 -04:00
526e02af53
TS SD integration #1653
2020-08-06 22:05:26 -04:00
ea7fed6a16
TS SD integration #1653
2020-08-06 01:15:41 -04:00
b208f592cd
TS SD integration #1653
2020-08-02 23:09:38 -04:00
10b8da525d
TS SD integration #1653
2020-08-02 22:31:11 -04:00
8f4aecf7ca
The Big Refactoring of 2019: folder structure #723
2020-08-02 20:46:40 -04:00
aa2ee8a776
TS SD integration #1653
2020-08-02 17:58:57 -04:00
55bf936cee
typo
2020-08-01 18:59:09 -04:00
cd696acbe2
init
2020-07-29 02:50:23 -07:00
8508be5ebd
dead
2020-07-29 02:49:37 -07:00
727f6e78ba
explicit
2020-07-29 02:49:31 -07:00
1f221043ed
shadowed
2020-07-29 02:49:23 -07:00
064c96836d
SD logging
2020-07-09 20:08:18 -04:00
0409087606
docs
2020-07-04 21:38:52 -04:00
6992a541f3
stm32/kinetis_pins.cpp: remove PORTS array - duplicates ports array ( #1527 )
2020-06-21 15:59:18 -04:00
048e910957
refactoring
2020-06-21 15:40:59 -04:00
03f4efa0b2
BMW E90 Kombi ( #1494 )
...
* second can bus, first steps
* added most important messages; no more errors
* cleaned up can messages
* second can bus, first steps
* added most important messages; no more errors
* cleaned up can messages
* post rebase/merge fixes
* more rebase/merge fixes
* even more rebase/merge fixes
* more fixes, removed auto-gen files
* removed more auto-gen files...
2020-06-14 16:59:43 -04:00
3a7c6f242b
Hardware pwm ( #1283 )
...
* hard pwm
* fix, comments
* PC6-9 and PD12-15
* PB6-9
* dynamic frequency
* f7 mcuconf
* format
* relocate to common, support variable frequency
* error handling
* oops
* fix test build
* noop kinetis
* better guards
* guard for bl
* guards don't work if they have typos
* more mapping
* oops
* don't use for slow pwm
* enable pwm
* guard properly
* save a little memory
* use less mem
* correct timers
* all your ram are belong to us
* update limit & comment
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-28 16:02:41 -04:00
a4329169e9
better file name
2020-05-25 13:02:05 -04:00
fc28692258
more readable error message thank you Matt!
2020-05-23 17:20:46 -04:00
f806ca091d
partial rollback
2020-05-23 17:13:46 -04:00
b11c5cd8c8
switch some firmware warnings to errors ( #1465 )
...
* warnings as errors
* throw instead of exit
* test massaging
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-23 10:46:28 -04:00
44b5e38d3a
"TLE8888 SR Unexpected response" does not work as intended fix #1466
2020-05-22 22:56:19 -04:00
a0a1a9f9bb
"TLE8888 SR Unexpected response" does not work as intended #1466
2020-05-22 08:23:49 -04:00
1387ea7582
helping build
2020-05-22 01:14:42 -04:00
c95a4c552b
more info into error message
2020-05-22 01:05:07 -04:00
09ff35918b
progress
2020-05-21 22:33:48 -04:00
af53939d84
Binary logging to SD ( #1461 )
...
* binary log
* remove old text logging
* change file extension
* just use a bare buffer
* more mem :(
* double ugh
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-21 15:52:58 -04:00
4f334c91d5
warnings ( #1462 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-21 01:08:07 -04:00
125701f514
free up timers for hardware PWM ( #1459 )
...
* free up timers
* put that back
2020-05-20 19:14:42 -04:00
725d2b816d
WBO
2020-05-20 19:01:55 -04:00
b71403de7a
Mc33 timings ( #1453 )
...
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 timings
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-05-20 02:35:18 -04:00
ee15560f3d
pass in write length ( #1447 )
2020-05-17 17:27:26 -04:00
5937ef8123
docs?
2020-05-17 17:08:04 -04:00
902b11fb5e
improve file format ( #1446 )
2020-05-17 17:02:22 -04:00
d43bc81c24
Mc33 vccp uv ( #1445 )
...
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 VccP (7v) under voltage detection - before and after DRIVEN, useful for regulator broken - or DC-DC logic converter broken
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-05-17 16:28:05 -04:00
af8de4c84f
Revert "Minor fixes ( #1442 )"
...
This reverts commit 0c095ddd
2020-05-16 19:28:49 -04:00
0c095ddd15
Minor fixes ( #1442 )
...
* exti trigger: mark pins used, handle errors
* MC33810 add to smart gpios
2020-05-16 19:15:49 -04:00
0c142921d6
don't register ID pin ( #1438 )
2020-05-16 00:33:47 -04:00
656acd1788
REVERT need to get master green
2020-05-15 20:15:34 -04:00
e3fd0a186a
Minor fixes ( #1437 )
...
* cmpilation warning cleanup
* exti trigger: mark pins used, handle errors
2020-05-15 18:03:18 -04:00
7500e44c8c
tle6240: fix crash in driver wake routine ( #1435 )
2020-05-15 15:54:41 -04:00
48aa40b344
smart gpios: remove dead code ( #1432 )
2020-05-14 16:15:55 -04:00
4e5a69891d
new LED logic: constant WARNING if VBATT is below 7v
2020-05-13 01:52:27 -04:00
257ed04fac
new LED logic: constant WARNING if VBATT is below 7v
2020-05-13 01:17:48 -04:00
52ad619b15
I think it's OK to crash very visibly if no proper SPI response
2020-05-13 01:07:11 -04:00
e10259de99
either newline at end of mk file either no backslash on last line ( #1425 )
...
This fixes following build issue under linux:
make: *** No rule to make target 'build/obj/.cpp cj125.cpp', needed by 'build/obj/ build/obj/cj125.o'. Stop.
make: *** Waiting for unfinished jobs....
Introduces in 8d35c35035
2020-05-12 09:55:43 -04:00
2e3c142993
Mc33 undervolt ( #1423 )
...
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
* mc33 clear driver status on startup
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-05-11 21:11:16 -04:00
8d35c35035
Aux serial ( #1422 )
...
* aux serial updates from last PR
* trying to guess
* wow that's old! also not working maybe?
* hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
* date
* Mc33 undervolt (#1421 )
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
* fixed {}
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: NOx-z <50815960+NOx-z@users.noreply.github.com>
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
Co-authored-by: kon <dev@triggerdevel>
2020-05-11 12:17:42 -04:00
7513b8ea5a
Mc33 undervolt ( #1421 )
...
* mc33 flash check
* DI sanity checks for setting HV config
* mc33 under voltage check
* mc33 under voltage check
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-05-11 01:52:20 -04:00
75781f1262
hiding diag code which was messing with GP2/GP3 i.e. TLE8888_PIN_22 TLE8888_PIN_23
2020-05-11 00:53:50 -04:00
633afc10c8
trying to guess
2020-05-09 20:45:20 -04:00
19a1ad05b1
tle8888 restoration
2020-05-09 16:59:54 -04:00
b88b1e4aa5
mre 050 compromise
2020-05-09 09:40:00 -04:00
8c3485a8dc
Revert "Tle8888 for mre 050 ( #1408 )"
...
This reverts commit ba1a606d
2020-05-08 23:58:34 -04:00
ba1a606d9a
Tle8888 for mre 050 ( #1408 )
...
* tle8888: fix tle8888_chip_init flow
* tle8888: set correct pin modes for mcu gpios in tle8888_chip_init
Direct drive, reset, inj_en and ign_en gpio should be outputs
2020-05-08 19:05:30 -04:00
d0d5cdd4dd
tle8888: on MRE 0.5.0 we can drive ING_EN and INJ_EN from STM ( #1407 )
...
Do it!
2020-05-08 17:47:41 -04:00
98bca0cb23
Tle8888 stage 1 ( #1404 )
...
* TLE8888: implement diagnostic
* TLE8888: add support for PP mode on OUT21..24
* tle8888: use helpers to extract register value from 16bit reply
2020-05-07 09:49:57 -04:00
5987fb8b88
[SAFE] Debug cleanups ( #1403 )
...
* electronic throttle: inprove debug
* idle thread: show debug info for configured idle driver
* gpio-chips: make private functions static
2020-05-06 20:06:50 -04:00
07e6e2c4ad
steps towards tle8888
2020-05-06 19:20:12 -04:00
858821ed66
proteus -> exti ( #1378 )
...
* proteus -> exti
* do frankenso pal the same way
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 18:52:15 -04:00
11a02b6395
class constructors are a great way to have simple initialization sequence
2020-05-03 10:58:52 -04:00
244d1ea7e8
docs
2020-05-03 10:41:48 -04:00
96ceae7d17
refactoring: using constructor life-cycle to simplify initialization sequence
2020-05-02 23:15:48 -04:00
d371af5b89
CJ125 PI commands
2020-05-01 20:22:49 -04:00
669322311f
cj125 progress
2020-05-01 19:42:09 -04:00
de519474ef
cj125 less verbose when running
2020-05-01 19:27:26 -04:00
d6db0d1013
bugfix
2020-05-01 19:19:29 -04:00
c39662b5c6
better state messages
2020-05-01 18:52:06 -04:00
fe25c8162a
Attempting cj125
2020-05-01 17:52:25 -04:00
865531193d
docs
2020-04-30 22:30:37 -04:00
7686ee271c
https://github.com/rusefi/rusefi_documentation/issues/37
2020-04-29 18:46:51 -04:00
0c5e41a36d
fix master #1375
2020-04-28 08:10:36 -04:00
cb668e5234
fix master ( #1375 )
...
* fix
* put back how it was
* missed a spot
2020-04-28 08:08:41 -04:00
fe4b531aeb
Move ETB control to a thread ( #1374 )
...
* switch to thread
* actually use default frequency define
* crank ADC too
* make space in RAM
* remove TS field
* this should work for test
* fix dt
* re-resize ram
2020-04-28 07:22:31 -04:00
1b84406e77
dead code
2020-04-26 17:40:12 -04:00
83cca6ec7a
allow overriding configuration ( #1341 )
...
* config overrides
* proteus too
* comment
* remove wno-error
* comment
2020-04-26 00:07:59 -04:00
474d5e64cf
Update chibios ( #1364 )
...
* Update ChibiOS
* Fix coexistance of ChibiOS and our flash drivers
* Add 'int' = internal prefix for all on-chip flash functions
This avoid conflict with ChibiOS functions available after
enabling HAL_USE_EFL
* Exclude ChibiOS flash driver from bootloader
* Makefile magic?
* Kinetis: fix build after ChibiOS update and switching to SMART_BUILD
* Bootloader now use SMART_BUILD too
2020-04-25 16:32:32 -04:00
a8db44d48a
Remove scheduler debug pins ( #1359 )
...
* trigger gen refactoring
* missed one
* remove microsecond timer debug pins
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-24 23:13:05 -04:00
f704bf22cb
use the linker! ( #1363 )
2020-04-24 21:21:04 -04:00
b6ee79327d
switch ADC to gpt ( #1343 )
...
* switch to gpt
* halconf
* fix kinetis
* fix kinetis
* fix guards
* comment cleanup
2020-04-23 22:50:18 -04:00
ac9ca1343a
tle8888 modes corrected
2020-04-23 19:49:22 -04:00
c52c7e2f1f
TLE8888 mode flexibility
2020-04-23 16:57:37 -04:00
638cb64b54
Can vss updates ( #1345 )
...
* Vss over Can implementation proposal
Working for BMW e46
* fixed Firmware CI?
* kinetis fix.
* minor fixes
* Added W202 + fixed broken configs
- w202 Vel decoded
- added dbc checks
2020-04-22 13:40:08 -04:00
fe3030bb23
Vss over Can implementation proposal ( #1340 )
...
* Vss over Can implementation proposal
Working for BMW e46
* fixed Firmware CI?
* kinetis fix.
* minor fixes
2020-04-21 20:48:37 -04:00
1ced7eafbc
Better handling in case of ETB idle without ETB #1332
2020-04-19 21:51:27 -04:00
2fdce936f0
deduplicate logic ( #1307 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-17 16:26:51 -04:00
82c3a7b2d4
minor fix
2020-04-16 16:04:38 -04:00
fde7acd16f
DI HV sanity checks ( #1306 )
...
* mc33 flash check
* DI sanity checks for setting HV config
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-04-16 16:04:09 -04:00
3a70700935
MC progress
2020-04-16 14:08:28 -04:00
0657e3aeac
MC33816 dram update ( #1305 )
...
* mc33 flash check
* update dram and set boost voltage function
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-04-16 07:32:08 -04:00
5c4eb10c52
multi-channel Tuner Studio tooth logger #1284
2020-04-15 19:10:54 -04:00
8190971fc8
mc33 fix
2020-04-14 19:36:25 -04:00
18c5fba979
MC restart
2020-04-14 19:23:53 -04:00
e32aa5266b
multi-channel Tuner Studio tooth logger #1284
2020-04-14 15:17:15 -04:00
0cce98793a
mc33 better error handling
2020-04-14 15:07:24 -04:00
90ecfb51fe
mc33 better error handling
2020-04-14 15:05:33 -04:00
2d663b844b
mc33 flash check ( #1296 )
...
Co-authored-by: Christopher W. Anderson <gitstuff@pswitch.com>
2020-04-14 00:57:19 -04:00
412fea4648
mc33 progress
2020-04-13 20:01:06 -04:00
33deca6c42
mc progress
2020-04-13 19:49:02 -04:00
0be8ff3357
copy/paste is evil
2020-04-13 19:14:30 -04:00
21c7efbf53
Merge branch 'master' of https://github.com/rusefi/rusefi
2020-04-13 19:01:34 -04:00
4cde884f1d
MC flag0
2020-04-13 19:01:22 -04:00
89736f85f7
allow different dlc ( #1294 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-13 17:05:52 -04:00
ced931c9b2
new attempt at better simulator
2020-04-13 13:12:55 -04:00
25b281c9e7
fixing build
2020-04-13 10:23:08 -04:00
a08a6cebff
progress
2020-04-13 09:14:48 -04:00
1d9355a05b
mc33816 driven to high, and a few additional checks
...
ven#
2020-04-12 18:09:57 -04:00
b56310195d
one place for default test config
2020-04-12 17:47:30 -04:00
ff867b9301
fix warnings ( #1282 )
...
* warnings
* don't need to template those
2020-04-12 09:39:14 -04:00
376ca47f12
DI progress
2020-04-11 21:48:04 -04:00
9d2249390f
cj125 diag
2020-04-09 00:17:29 -04:00
19184033dd
cj125 diag
2020-04-09 00:12:27 -04:00
89474adb63
cj125 progress
2020-04-08 23:14:21 -04:00
4056cf1022
extracting method
2020-04-08 22:36:18 -04:00
5931fdb915
refactoring
2020-04-08 21:23:49 -04:00
dae398d6cd
pin_repository: fix for boards with gapes in brain_pin_e
...
Some additional math should be done to convert brain_pin_e to index
and back in case board do not have all chips exist in enum.
ifdef hell is for Kinetis board that uses its own brain_pin_e enum
2020-04-06 14:30:14 -04:00
30ccaa4c24
pin_repository: fix compilation for devices without TLE8888
2020-04-06 14:29:02 -04:00
66570a0f28
smart gpio clean-up
2020-04-06 14:28:08 -04:00
d3745c0f9e
smart gpio clean-up
2020-04-06 14:13:29 -04:00
2f69beee31
a bit of header clean-up
2020-04-06 13:05:30 -04:00
2efa22f926
code style
2020-04-06 12:34:21 -04:00
ba9424f538
clean-up by Dron0Gus
2020-04-06 11:55:44 -04:00
3186741ddc
TPS Initialization Testing ( #1264 )
...
* test support
* stub for tests
* plumbing so we can test this
* add test
* comments
2020-04-05 09:10:08 -04:00
0ca63356c0
improve pin error messages ( #1252 )
...
* improve error msg
* emulator pin names too
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-04-03 15:00:59 -04:00
a193ae3e42
switch ( #1250 )
2020-04-02 16:26:06 -04:00
a47dce4025
code style
2020-04-01 21:32:21 -04:00
50cd6549a2
Fully switch acc pedal to new sensors ( #1212 )
...
* proxy sensor
* header
* idle
* can
* settings
* remove old mocking
* remove old impl
* etb
* oops, gotta actually register it
* fix test
* structured bindings ftw!
* driver intent for stepper
* tear out old
* oops too much
2020-04-01 20:21:03 -04:00
907b80efa9
code style
2020-04-01 19:00:56 -04:00
15c40ffb5b
Sensor-via-CAN ( #1241 )
...
* CAN sensor impl
* subscription hookup
* printing
* init
* inject stamp
* don't init const field
* clarify
* guard for non-CAN builds
* fix merge
* guard with EFI_CANBUS_SLAVE
* headers, guards
* include
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-31 23:21:05 -04:00
96828ae017
CAN progress
2020-03-31 20:57:52 -04:00
81211219f2
CAN progress
2020-03-31 16:49:19 -04:00
d541e04a7d
Friendlier pin names ( #1233 )
...
* enable TS error readout
* friendlier text for common errors
* improve comment
* friendlier ADC errors
* ign/inj names
* more pin names
2020-03-29 19:07:07 -04:00
8fd9842310
cleanup extern mess ( #1237 )
...
* cleanup
* move outside define
2020-03-29 19:06:03 -04:00
61ee03ee06
Show fatal error text in TS (the right way) ( #1232 )
...
* enable TS error readout
* friendlier text for common errors
* improve comment
2020-03-29 07:27:36 -04:00
d1b5a51400
progress
2020-03-28 20:56:58 -04:00
53679fab54
Finally rename injector_central to bench_test ( #1229 )
...
* bench test rename
* rename consumers
* good lord what are all of these externs doing
* fix tests
2020-03-26 08:03:55 -04:00
608cf45d26
TS cleanup pass ( #1225 )
...
* remove biquad config
* fuel pump clarity
* one code usage
* minimal generate for ci
* and don't build it either
* remove commented out code
2020-03-25 23:00:17 -04:00
2349d74f0b
Default to applyPinState ( #1219 )
...
* make applyPinState default
* consumers
* format
2020-03-25 18:14:09 -04:00
2c809e4475
Remove old monitoring timestamps ( #1217 )
...
* remove monitoring timestamps
* adv map
* fuel calc
* map avg
* printing
* spark logic
* hip 9011
* new traces
* s
* missed a few
2020-03-24 20:19:19 -04:00
392c3a1d0c
random code from Ola
2020-03-24 19:14:16 -04:00
dc769e7a2a
progress
2020-03-23 23:15:44 -04:00
31ef10fe1c
start/stop progress
2020-03-23 10:32:41 -04:00
4740f525ee
save some ram ( #1211 )
...
* remove dead stuff
* why store those pointers twice?
2020-03-22 19:06:29 -04:00
0475348e4c
start/stop
2020-03-20 20:45:35 -04:00
ef28f394a9
At least read all TPS inputs
2020-03-20 09:53:45 -04:00
7b44f618e7
custom verbose can format ( #1200 )
...
* config
* ts
* default cfg
* hand generate
* tx struct helper
* add data sending
* wire up
* value_or helper
* add file
* more sensors
* header
* compactify
* add status frame
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-19 17:58:46 -04:00
30cdeb0d7f
split out can tx logic ( #1197 )
...
* move to can folder
* split out can rx
* only print in debug mode
* guard on feature flag
* split out tx
* headers
* headers
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-19 14:01:07 -04:00
aeee5a1391
split out can rx logic ( #1196 )
...
* move to can folder
* split out can rx
* only print in debug mode
* guard on feature flag
* headers
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-19 08:43:37 -04:00
194bf2e0bf
Add new CanTxMessage class, consume in OBD2 ( #1186 )
...
* relocate
* include path
* simulator makefile
* fix mre while we're at it
* it would help if I fixed it right
* add can_msg
* convert obd2
* guard properly
* better include order
* docs & headers
* inject CAN device
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-18 22:07:41 -04:00
09c4def495
proteus-f4 was requested
2020-03-18 11:37:53 -04:00
bb9c851a07
Deduplicate mpu_util headers ( #1187 )
...
* this flag did nothing
* header dedupe
* mre fix again
* get all dependencies in mpu_util.h
* guard can/spi
* more dedupe
* pragma once
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-13 18:48:22 -04:00
fc051fd2ca
remove ( #1188 )
...
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-03-13 17:19:29 -04:00
5fc82e21f8
Move can_hw.cpp in to drivers folder ( #1184 )
...
* relocate
* include path
* simulator makefile
* fix mre while we're at it
* it would help if I fixed it right
2020-03-13 09:50:43 -04:00
c19f3e4caa
Control stepper with dual H-bridges ( #1121 )
...
* divorce stepper from hw
* oops
* ptr not ref
* hbridge stepper
* typo
* hook up twin h
* hook up hardware
* use config field
* hook up motor repo
* guard tests
* whoops
* ok fix for real
* ok that's the right thing
* do full stepping
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.stagpad.local>
Co-authored-by: Matthew Kennedy <matthew@mck-mbp-15.local>
2020-03-10 15:18:29 -04:00
9f26e6d894
fix icu trigger polarity ( #1177 )
...
* fix polarity
* fix confusing names
2020-03-08 08:57:21 -04:00
c1319342d5
don't use standard sprintf/snprintf ( #1174 )
2020-03-07 10:28:18 -05:00
40b0783205
Split out EtbHardware ( #1168 )
...
* start tear out motor
* fix
* nuke reconfig
* guard for test
* test fixing
* format, condense headers
* fix todos
* undo todo
* format
2020-03-03 17:56:50 -05:00
986b80671b
warnings ( #1169 )
2020-03-03 08:37:02 -05:00
8c38bd5ad1
verboseTLE8888
2020-02-27 02:11:20 -05:00
397907a06f
Support disabling most/all features ( #1162 )
...
* this flag did nothing
* guard features properly
2020-02-26 18:16:35 -05:00
6c747ebbbe
this flag did nothing ( #1161 )
2020-02-26 17:30:02 -05:00
ada5d5fee7
insert dsb on flash write ( #1160 )
2020-02-25 23:52:11 -05:00
c35f4aa2e3
more mc33816
2020-02-25 22:38:08 -05:00
ce2ec3d544
TEST_33816
2020-02-25 21:35:21 -05:00
b84971cc6a
code style & pleasing LGTM
2020-02-18 08:16:19 -05:00
333a7a6608
TLE8888 watchdog #917
2020-02-12 19:32:40 -05:00
deb73f505b
#917 progress
2020-02-12 17:37:45 -05:00
efc8d69085
and fixing build now!
2020-02-12 17:23:22 -05:00
6c843e6954
tle8888 refactoring already - extracting method
2020-02-12 17:19:58 -05:00
abf0f950e7
Merge branch 'master' of https://github.com/rusefi/rusefi
2020-02-12 08:54:41 -05:00
01855b9c85
more commands
2020-02-12 08:53:50 -05:00
3b61334714
tle8888: disable diagnostic for outputs ( #1144 )
...
DS is not clear, may be tle8888 clears OE bit in case of error on
output.
2020-02-12 08:53:35 -05:00
74ead04e84
tle8888 dump at init
2020-02-12 08:34:26 -05:00
86b3332cfe
have nothing else to do :(
2020-02-12 08:24:24 -05:00
4dbff5ff30
tle8888 output fix
2020-02-12 08:15:55 -05:00
5665e43954
tle8888 output fix
2020-02-12 08:04:33 -05:00
2eec13007e
FATAL error running MRE blinking test #1137
...
typo
2020-02-11 17:52:01 -05:00
1e010c8e82
Merge branch 'master' of https://github.com/rusefi/rusefi
2020-02-11 17:49:49 -05:00
8c1536dd0e
FATAL error running MRE blinking test #1137
...
still not the fix?
2020-02-11 17:49:39 -05:00
82e33e45af
Tle8888 wd ( #1143 )
...
* tle8888: watchdog: debug over TS: remove tailing register address
* tle8888: ann console command to dump all regs
2020-02-11 17:49:14 -05:00
678c3525b8
tle8888: watchdog: debug using TS ( #1142 )
2020-02-11 16:56:52 -05:00
95ce978c23
tle8888: watchdog: use FWDRespSyncCmd for last response ( #1140 )
2020-02-11 15:49:17 -05:00
7bd68beae9
tle8888: watchdog: do not overwrite defaults, response table fix ( #1139 )
2020-02-11 15:36:53 -05:00
6b874c12c0
TLE8888 watchdog #917
...
still no luck. responses 0x85c and 0xa5c
2020-02-11 00:54:15 -05:00
cd9c291e3e
WdDiag
2020-02-10 21:28:55 -05:00
41253b88b8
TLE8888 watchdog #917
...
time to start working?!
2020-02-10 18:32:32 -05:00
a29d6fc241
TLE8888 watchdog #917
...
maybe better start-up sequence
2020-02-10 17:08:37 -05:00
0b8c1e69dc
TLE8888 watchdog #917
2020-02-10 14:37:52 -05:00
59eb424ba0
TLE8888 watchdog #917
...
window watchdog progress
2020-02-10 13:24:09 -05:00
b3bc3325b9
TLE8888 watchdog #917
...
first steps
2020-02-10 11:11:00 -05:00
cb8612a15c
code style
2020-02-10 09:29:11 -05:00
551273a336
FATAL error running MRE blinking test fix #1137
2020-02-09 21:16:31 -05:00
51cfc6bcf1
tle8888 start-up clean-up
2020-02-09 20:41:25 -05:00
2add78b242
we already have a timestamp, don't take another one ( #1133 )
2020-02-08 17:48:15 -05:00
8c118f2fbe
Stricter compile options ( #1132 )
...
* stricter
* don't warn on that one
* this code was dead
2020-02-08 08:05:40 -03:00
52c710bb62
move flash addr in to mpu_util ( #1123 )
...
* move flash addr in to mpu_util
* this _may_ work
* don't use offsetof
* proper header + defines
2020-02-05 08:06:38 +05:30
4b4e683957
Boost pr ( #1114 )
...
* boost control
* cleanup
* Delete rusefi_config.txt
* Add files via upload
* Delete rusefi_config.txt
* Add files via upload
* Update rusefi.input
* Update boost_control.cpp
2020-02-02 03:56:21 -05:00
ff3329655a
Dont cache dma buffers ( #1110 )
...
* add no_cache
* don't disable cache
* conventions
* formatting
2020-01-29 00:32:43 -05:00
6e128a341b
code style
2020-01-26 13:58:47 -05:00
1817b8654e
SCB_DisableDCache rollback
2020-01-25 21:30:19 -05:00
fea2394c7b
F7 SPI challenges
2020-01-24 23:52:56 -05:00
aabc50e7a9
refactoring trigger
2020-01-24 13:42:09 -05:00
8a88c90f3b
code style: trying to get used to this syntax
2020-01-22 00:45:09 -05:00
ba0c48e0ac
use NT_PER_SECOND instead of convert from microseconds ( #1107 )
...
* add NT_PER_SECOND
* missed a few
* inject tooth logger timestamp
* inject
2020-01-19 22:23:41 -05:00
7da4196f9c
NT not US not MS
...
thank you Matt
2020-01-19 03:49:35 -05:00
2ae53d1681
better constraint validation
2020-01-19 00:28:58 -05:00
b377e1f2f0
better variable name & docs
2020-01-19 00:16:19 -05:00
fa5b5b76fb
Separate stepper control logic from hardware ( #1101 )
...
* divorce stepper from hw
* oops
* ptr not ref
* ptr not ref
* whitespace
* null check
2020-01-15 02:18:15 -05:00
bb217b01dd
happy new year unification
2020-01-13 21:57:43 -05:00
618d6f5a5e
Gpio diagnostic ( #1100 )
...
* enums: add brain_pin_diag_e enum for pin diagnostic
* gpio core: add pin diagnostic call
* gpio: mc33810: add diagnostic support
* gpio: mc33972: add diagnostic support
* gpio: tle6240: add diagnostic
* pin_repository: output diagnostic data for gpio chips
* enums: kinetis: add brain_pin_diag_e enum for pin diagnostic
2020-01-12 10:20:10 -05:00
ecd240d6f2
AEM X-Series CAN Wideband Support ( #1096 )
...
* aem xseries
* parens to avoid operator precedence issues
* put in cfg
* disable that too
* fix sim/unit
* enough generated for ci
* this will guard correctly
2020-01-12 03:44:37 -05:00
d3d088676b
Add timeout + raw value access for sensors ( #1098 )
...
* timeout
* inject stamp
* allow getting raw value
* plumb timeout
* fix tests
2020-01-12 03:25:23 -05:00
85a460f2ba
hw: gpio: use unsigned int as pin number inside gpiochip drives ( #1097 )
...
Not brain_pin_e. Drivers like to see pin number within current
chip.
2020-01-11 10:29:41 -05:00
a6a1335adb
Require tooth reference time for scheduleByAngle ( #1091 )
...
* injection
* injectors
* add edge timestamp to ShaftPositionListener
* scheduleByAngle require edgeTimestamp
* schedule with nt not us
* oops, these were missing from this branch
2020-01-09 23:45:13 +03:00
851c6041b1
Inject timestamps in to hwHandleShaftSignal ( #1090 )
...
* injection
* injectors
2020-01-09 21:19:11 +03:00
859ef97607
stepper as thread task ( #1089 )
2020-01-09 09:03:23 +03:00
b83a5310be
happy new year
2020-01-08 00:02:40 -05:00
95a7a9a8e1
Strongly typed action constructor ( #1087 )
...
* strong typing
* maybe we needed that one
2020-01-07 18:10:31 -05:00
9f0d84f338
Gpio fixes ( #1086 )
...
* drivers: gpio: add MC33810 driver (skeleton)
* pin_repository: debug: do not show absent chips
2020-01-07 07:55:50 -05:00
a2fdc1128e
triggers: fix coexistence of ICU and EXTI trigger drivers ( #1085 )
2020-01-07 03:42:08 -05:00
5c85d53e16
Pass action_s instead of callback/param ( #1084 )
...
* change action
* consumers
* fix test
* didn't mean to add those
* simplify
* fix simulator
* fix sim for real
* oy
* maybe this time the simulator will actually be fixed, for real
* don't rely on undefined behavior
2020-01-07 00:41:18 -05:00
1b42748e60
Spi fixes ( #1083 )
...
* spi: add support for SPI4
* mpu_util: spi: add 8BIT mode definitions for F4, F7 and kineris (?)
2020-01-06 08:44:23 -05:00
eabde7079a
icu trigger: do not crash on incorrect brainPin ( #1082 )
...
* icu trigger: do not crash on incorrect brainPin
* Update trigger_input_icu.cpp
2020-01-03 09:13:55 -05:00
4192de8fcc
TL,DR
2019-12-26 23:07:15 -05:00
a9229d08cb
MC33816 default firmware
2019-12-26 23:06:31 -05:00
8bc2dba054
would URLs work?
2019-12-26 22:30:18 -05:00
d575ffe5c1
enabling TIM8 ICU
2019-12-25 09:28:51 -05:00
cb9fc19f92
that's not a worth a file
2019-12-24 00:03:53 -05:00
868a2bb8ef
Split CAN in to separate threads for rx/tx ( #1078 )
...
* rewrite can
* default parameters
2019-12-22 12:17:53 -05:00
9645130527
Shrink output channels, now with passing CI ( #1077 )
...
* reorder fields
* temporary tle8888 fix
* comment, simplify
* hand tweak generated
* oops, those are reciprocal
* fix engineLoadAccelExtra
* aggressive priority order
* fix output size
* comments
* reorder fields, no sizes yet
* should've been signed
* simplify constructor mess, hook up scaling
* notes
* typo
* if -> switch
* rev signature
* correct map offset
* handle unsigned properly
* RPM is unsigned
* vss isn't scaled
* extract magic
* required generated for build
* de-scale rpm
* field type cases
2019-12-22 08:12:45 -05:00
fde9a449cf
random refactoring: hopefully not changing byte size of any variables but clarifying/fixing type between ticks, US and MS
2019-12-21 21:11:09 -05:00
871f86967f
Revert "DRAFT Shrink output channels, again ( #1074 )"
...
This reverts commit 562ce6cc
2019-12-21 15:02:49 -05:00
562ce6ccaf
DRAFT Shrink output channels, again ( #1074 )
...
* reorder fields
* temporary tle8888 fix
* comment, simplify
* hand tweak generated
* oops, those are reciprocal
* fix engineLoadAccelExtra
* aggressive priority order
* fix output size
* comments
* reorder fields, no sizes yet
* should've been signed
* simplify constructor mess, hook up scaling
* notes
* typo
* if -> switch
2019-12-21 08:55:19 -05:00
22f2739764
Revert "Shrink output channels, use scaling ( #1069 )"
...
This reverts commit 89405014
2019-12-19 22:35:06 -05:00
89405014cf
Shrink output channels, use scaling ( #1069 )
...
* reorder fields
* temporary tle8888 fix
* comment, simplify
* hand tweak generated
* oops, those are reciprocal
* fix engineLoadAccelExtra
* aggressive priority order
2019-12-19 20:37:42 -05:00
eb27bcf3d6
Terrible ADC3 hack for Proteus vbatt support ( #1066 )
...
* this is a great idea!
* typo
* simplify
* simplify, cache coherency
* enable adc3 in board file
* copyright
* fix tests, probably
2019-12-17 08:34:56 -05:00
a1f6b358ef
Merge branch 'master' of https://github.com/rusefi/rusefi
2019-12-14 09:36:46 -05:00
ae55eaad67
Re-shrink stacks ( #1060 )
...
* small stacks
* giant servo stack
* reclaim ram
2019-12-14 09:31:13 -05:00
521b27ff35
codes clean-up
2019-12-14 00:14:36 -05:00
9403b2a8fc
fixing build is my most favourite time!
2019-12-13 18:02:24 -05:00
af4f20551b
getting rid of boardConfiguration / binary compatible change
2019-12-11 17:48:55 -05:00
37473bd26e
Move slow ADC to thread #630 ( #1042 )
...
* adc with thread
* enable
* check result
* stacktual embiggenment
* tracing
* let's be type safe
* improve assert
* format, comment
* remove EFI_INTERNAL_SLOW_ADC_PWM fully
2019-12-11 09:28:11 -05:00
c5cfd21a70
just a trivial massive rename: TriggerState > TriggerWaveform
2019-12-08 01:09:39 -05:00
6c76c5fcd6
PAL repair
2019-12-05 21:10:29 -05:00
2b49fc31ea
steps towards fixing PAL inputs
2019-12-05 21:04:24 -05:00
c0450ebd9b
following the pattern
2019-12-04 07:33:56 -05:00
2a39c69f51
iacPidMultTbl + EFI_IDLE_PID_CIC + kinetis_hysteresis ( #1043 )
...
* rename EFI_IDLE_INCREMENTAL_PID_CIC -> EFI_IDLE_PID_CIC
* Impl. IacPidMultTable
* Kinetis: Trigger Comparator Hysteresis settings (+adaptive mode)
2019-12-04 00:37:32 -05:00
0dd517bcc7
The Big Refactoring of 2019: folder structure #723
2019-12-04 00:22:34 -05:00
bd841b6ca2
docs
2019-12-03 23:55:18 -05:00
82fab0282c
lovely write-out-of-bounds in case of invalid configuration bugfix
2019-12-02 20:32:21 -05:00
6555e4b305
"sensor chart" for aux fast analog input
2019-12-02 20:31:49 -05:00
2eab39d3ff
auxFastSensor
2019-12-02 17:49:01 -05:00
87143bef9f
fixing build
2019-12-02 09:59:53 -05:00
0b4f624b2a
cj125 unit test progress!
2019-12-02 01:52:54 -05:00
3b352f6a3a
5V-compatible adcVcc + trigger_input_comp + Kinetis COMP driver impr. ( #1036 )
...
* adcVcc is not only for 3V STM32
* update ini files
* Kinetis: improve COMP driver
* Improve trigger_input_comp.cpp (hysteresis)
2019-12-01 12:08:55 -05:00
b04166d173
that's how we can move all fields one by one from boardConfiguration to engineConfiguration
...
my approach is to move fields from the bottom of BC struct
2019-11-30 10:24:37 -05:00
a78dc22bf1
better state validation, better error codes
2019-11-29 23:41:26 -05:00
fd4412a2cd
refactoring
2019-11-29 22:09:08 -05:00
ff3fbffd80
extracing constant & more information for HW CI
2019-11-29 21:57:59 -05:00
175a18b9ec
steps towards dual ETB
2019-11-28 23:51:47 -05:00
1808642af1
Starter relay + Hardcoded 'FSIO' + simulator fix ( #1032 )
...
* Starter Relay: gui + built-in FSIO impl.
* Hardcoded 'FSIO' replacement for RAM-limited boards
* fix simulator
2019-11-25 20:08:01 -05:00
97884dc677
Kinetis: fix ENABLE_PERF_TRACE and trigger_input_comp ( #1031 )
...
* Kinetis: fix ENABLE_PERF_TRACE
* Kinetis: fix trigger_input_comp
2019-11-25 00:22:26 -05:00
9a0b66791b
unregisterOutput() + isPinOrModeChanged() + Stepper::stepPin+enablePin + Kinetis fix ( #1029 )
...
* Fix isConfigurationChanged() for EFI_ACTIVE_CONFIGURATION_IN_FLASH
* unregisterOutput() -> unregisterOutputIfPinOrModeChanged()
* clutchUpPinMode for unregisterPin()
* Fix Kinetis: EFI_ACTIVE_CONFIGURATION_IN_FLASH & EFI_MAIN_RELAY_CONTROL
* Stepper: enablePin & stepPin with modes support
2019-11-25 00:02:53 -05:00
e7559db170
Sporadic error: FATAL error: handleCycleStart #1030
...
more details
2019-11-24 21:59:29 -05:00
cfcfc851f5
Sporadic error: FATAL error: handleCycleStart #1030
...
more details
2019-11-24 21:45:32 -05:00
04f6913d56
MapAveragingCallback schedules all cylinders at once #974
...
saving pennies
2019-11-24 20:48:25 -05:00
4305b4ce2f
not needed since included in common_headers.h
2019-11-23 18:16:41 -05:00
93d24dfc0b
Merge remote-tracking branch 'origin/master' into perf-tracing
2019-11-19 16:28:58 -08:00
7dfdfc6378
docs & code formatting
2019-11-19 18:17:03 -05:00
08e3dd835d
reducing warnings
2019-11-17 08:44:07 -05:00
b533ff68e8
Revert "OK trying partial revert now"
...
This reverts commit 4a8b8336
2019-11-13 22:56:43 -05:00
071b1acb8e
refactoring: time to unify digital pin API
2019-11-13 22:50:37 -05:00
e33798c214
looks like this part of refactoring is good?
2019-11-12 23:38:02 -05:00
c23cb5693a
re-applying change
2019-11-12 22:56:56 -05:00
4b1c1e72ab
time to panic and revert more
2019-11-12 21:42:44 -05:00
4a8b8336c4
OK trying partial revert now
2019-11-12 21:05:51 -05:00
e29f993487
I have no idea what's broken
2019-11-12 20:35:07 -05:00
8ac4bc40da
ops that's not what I mean
2019-11-12 19:58:14 -05:00
0af0190468
what's the probability of efi::size breaking build?
2019-11-12 19:40:33 -05:00
e6abba09a9
refactoring: time to unify digital pin API
...
trying to fix build
2019-11-12 19:04:33 -05:00
b6b8c001cd
refactoring: time to unify digital pin API
2019-11-12 01:08:45 -05:00
6bcf7a438d
refactoring: time to unify digital pin API
2019-11-12 01:08:31 -05:00
0ae6084301
refactoring: time to unify digital pin API
2019-11-12 00:56:51 -05:00
6fee1a5f9d
refactoring: time to unify digital pin API
2019-11-12 00:25:10 -05:00
3c57c3d216
refactoring: time to unify digital pin API
2019-11-11 23:32:09 -05:00
f082ac48b1
refactoring: time to unify digital pin API
2019-11-11 23:04:27 -05:00
15a571fb3e
this is not great :(
...
#639
#971
2019-11-11 22:19:35 -05:00
bb7cc14d27
fixing unit tests build
2019-11-11 21:45:15 -05:00
a4a618b6bd
different take on #971
2019-11-11 21:26:09 -05:00
f3b8fba38a
different take on #971
2019-11-11 21:25:40 -05:00
1a78b994b2
Compile warning clean-ups.
...
Removed mistakenly-added README~
(cherry picked from commit 84b30c992ac77a1563f7449e45b9fa353612fba9)
2019-11-11 20:35:20 -05:00
30f07fa14c
evil manual cherry
2019-11-11 20:34:09 -05:00
410391598e
Strange INJ1 signal behavior (when the frequency of scheduler's timer is less than 1MHz) fix #996
2019-11-10 23:54:08 -05:00
79e049a5f8
Strange INJ1 signal behavior (when the frequency of scheduler's timer is less than 1MHz) #996
...
new advanced debugging: hardware pins
2019-11-10 12:39:47 -05:00
1ed2711c02
consistency
2019-11-07 15:22:17 -05:00
962a879a7d
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-06 20:01:53 -05:00
8525c48036
evil manual merge of https://github.com/DonaldBecker/rusefi
2019-11-06 18:26:50 -05:00
eb4ceda52b
refactoring: removing unused parameter
2019-11-05 22:49:11 -05:00
449df85f8f
move to slow adc ( #997 )
2019-11-04 17:03:21 -05:00
63702dbeeb
TLE6240 outputs fix ( #994 )
2019-11-01 15:49:55 -04:00
e8fa6135f4
Kinetis: smarter SPI_CS control ( #993 )
2019-11-01 10:50:22 -04:00
ee5ee1942c
Kinetis & TLE8888 compatibility & fixes... ( #991 )
...
* TLE8888: More compatibility & postTunerStudioState
* activeConfiguration & EFI_ACTIVE_CONFIGURATION_IN_FLASH fix
* Kinetis: jump_to_bootloader() impl.
* Kinetis: UART baudrate safety check
* Kinetis: OMG!..
2019-10-31 16:06:34 -04:00
4d095d4844
60/2 VW trigger has running issue on 19/10/19 snapshot fix #986
2019-10-30 20:51:20 -04:00
2f3ccb8125
ADC sample time & rate #976
2019-10-19 08:01:28 -04:00
490733ccad
half-solution would not pass CI, have to merge full solution without real HW test
...
#975
2019-10-19 07:35:21 -04:00
627f73502b
steps towards #975
2019-10-18 19:45:32 -04:00
d9401fbdbc
steps towards #975
2019-10-18 19:39:06 -04:00
0e01355c15
steps towards #975
2019-10-18 18:54:32 -04:00
d76670d946
trace all the things
2019-10-14 23:34:12 -07:00
f52bdecb80
profile all the things
2019-10-13 13:14:08 -07:00
763b17fb50
experiment
2019-10-11 17:43:21 -07:00
62577c47da
preparation for #961
...
more unified access to pre-calculated value
2019-10-10 08:25:58 -04:00
29804cbc8a
move tsOutputChannels to header ( #970 )
2019-10-08 21:02:51 -04:00
9c2dd10734
low hanging performance fruit ( #969 )
2019-10-08 20:44:59 -04:00
42dc9e3662
fancy C++ s/NULL/nullptr/
2019-10-08 01:26:35 -04:00
ee5643f1bf
Hmm, that didn't quite work right ( #955 )
...
* maybe that wasn't a good idea
* we don't need a copy because you can't clear the func after setting it
* no longer a template - move logic to cpp
* fix tests
* rename to avoid object collision
2019-09-25 07:26:56 -04:00
3bd1ddcc1f
Sensors: composition >> inheritance ( #953 )
...
* functional sensors
* format
* tests
* sim makefile
* eol
* format tests
2019-09-24 21:11:41 -04:00
8c108f8362
HardFault related to auto r = convertFromInputValue(inputValue); #948
2019-09-23 02:02:42 -04:00
2bacf53c0d
HardFault related to auto r = convertFromInputValue(inputValue); #948
...
wow, it's a miracle anything ever worked!
2019-09-23 01:55:23 -04:00
bce63b112a
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 16:52:22 -04:00
b3b8d8607c
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 16:41:10 -04:00
f600bbc6d7
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 10:02:07 -04:00
533087f475
ETB target is using integer values #945
...
refactoring - ADC mocking is a mess
2019-09-22 09:56:06 -04:00
d5ef749761
s/NULL/nullptr/
2019-09-22 08:22:35 -04:00
e29318b939
ETB target is using integer values #945
...
first we will write a unit test
2019-09-22 00:36:13 -04:00
9ad82b03b5
fixing build
2019-09-21 15:33:13 -04:00
f629ec038b
add sensor framework, tests ( #929 )
...
* add framework, tests
* move oil pressure to new way
* add init logic
* brackets on the same line
* spaces -> tabs
* spaces -> tabs for tests
* bracket on same line
* hook up sensor mocking
* add nan check
* fix nan check
* I wrote an essay
* casing
* only init if we have a sensor to init
* style, actually call init
* format
* fix casing
* typo
* implement linear sensor
* wire up producer
* smarter limiting
* setup comments
* add reporting
* doxyfile
* oops
* add adc subscription
* clarity
* fix logic
* multiply voltage
* test styling
* test guards
* remove dependencies
* linear sensor test
* remove unused
* fix merge
* format, implicit convert op
* explicit
* format tests
* fix merge
2019-09-21 14:33:38 -04:00
a08d0734dc
SD card: trying to automatically unmount and trying to re-mount
2019-09-21 12:41:17 -04:00
bd5159da20
refactoring - better method name
2019-09-21 11:34:28 -04:00
6505b0cb12
refactoring
2019-09-21 11:20:04 -04:00
2ce6e900a3
fixing bug from yesterday
2019-09-21 11:09:03 -04:00
ac0467308a
maybe logging performance improvement maybe not
2019-09-21 01:55:27 -04:00
0e59029541
spelling
2019-09-21 01:49:46 -04:00
3ac801f9c5
configurable SD card logging speed
2019-09-20 20:18:22 -04:00
221ef7d9bb
unit tests progress
2019-09-19 22:10:39 -04:00
c59d8164c6
unit tests progress
2019-09-19 21:41:52 -04:00
a604eade6f
pedal ADC should be faster #931
2019-09-13 19:54:28 -04:00
5d8e1f6c73
tle8888 reinit command
2019-09-05 10:30:27 -04:00
e4566ba6aa
TLE8888: NB2 solution + reset counter
2019-09-05 10:01:59 -04:00
51db88de18
TLE8888: track reset event by cleared OE bit in status register ( #918 )
...
As tle8888 suposed to be reset master and reset MCU there is no
flag showing POR reset. So try to poll OE bit.
2019-09-05 08:55:17 -04:00
c9241b89da
Hall mode for TLE88888 - VRSConfig1 VRSM #915
2019-09-04 20:02:32 -04:00
6262a5e84e
Hall mode for TLE88888 - VRSConfig1 VRSM #915
2019-09-04 09:24:01 -04:00
07cc3cffff
Hall mode for TLE88888 - VRSConfig1 VRSM #915
2019-09-04 00:27:19 -04:00
f73d18fd38
Merge branch 'master' of https://github.com/rusefi/rusefi
...
# Conflicts:
# java_console/models/src/com/rusefi/config/generated/Fields.java
2019-09-03 18:54:54 -04:00
9f50f9a4f7
EFI_CJ125_DIRECTLY_CONNECTED_UR should be a runtime parameter fix #914
2019-09-03 18:44:05 -04:00
1b8219432c
Live Data for hw VVT signals
2019-09-02 21:02:08 -04:00
7a7dbb8c30
refactoring: engine sniffer magic constants
2019-08-18 15:04:02 -04:00
b09ab8a57f
TLE8888 should be re-initialized every time we get +12 volts fix #901
...
fuel pump test passed, also longer start-up timeout is needed for reliable start
2019-08-16 23:21:03 -04:00
51902c12c5
TLE8888 should be re-initialized every time we get +12 volts #901
...
moving SPI initialization to thread - still works on real hardware
2019-08-16 22:56:06 -04:00
7eb3c7122f
TLE8888 should be re-initialized every time we get +12 volts #901
...
refactoring: extracting method
2019-08-16 22:41:19 -04:00
ed854a3828
refactoring
2019-08-16 22:01:32 -04:00
9d32f2c40a
refactoring: ChibiOS now offers native 'lockAnyContext' pattern
2019-08-11 15:23:15 -04:00
f393c5e2de
low side channels on MRE #900
...
this kind of makes a bit more sense like this?
2019-08-10 15:53:03 -04:00
074c99fab7
low side channels on MRE #900
...
this should NOT work but it works?
2019-08-10_15_19_19_770: EngineState: injection #1 @ ext:TLE8888.OUT22 led1
2019-08-10_15_19_19_771: EngineState: injection #2 @ PE10 led10
2019-08-10_15_19_19_773: EngineState: injection #3 @ PE12 led5
2019-08-10_15_19_19_774: EngineState: injection #4 @ PE14 led4
2019-08-10_15_19_19_775: EngineState: injection #5 @ ext:TLE8888.OUT24 led7
2019-08-10_15_19_19_775: EngineState: injection #6 @ PE11 led6
2019-08-10_15_19_19_777: EngineState: injection #7 @ PE9 led9
2019-08-10_15_19_19_777: EngineState: injection #8 @ PE8 led8
2019-08-10_15_19_19_779: EngineState: injection #9 @ PE13 led3
2019-08-10_15_19_19_780: EngineState: injection #10 @ ext:TLE8888.OUT23
led2
2019-08-10 15:23:41 -04:00
4ddf0ba5a2
low side channels on MRE #900
...
getting closer but still issues
2019-08-10 14:53:57 -04:00
ef79fb15ba
low side channels on MRE #900
...
progress - now all 10 BLINK, but two are blinking together
2019-08-10 13:45:00 -04:00
5503de12fb
low side channels on MRE #900
...
progress - at least something is blinking now
2019-08-10 13:25:08 -04:00
ee41d37c08
code style/type safety/docs/typos
2019-08-10 11:13:41 -04:00
c29a6bb323
MRE hangs up on bench fix #899
2019-08-10 00:53:16 -04:00
fd7353ee26
default pinout nightmare
2019-08-07 00:36:54 -04:00
dece505dec
fixing build?
2019-08-06 22:33:27 -04:00
d5451a7b4f
NA6 & trigger
2019-08-06 22:17:18 -04:00
36a8cf8ad4
CI instability: FATAL error: warn stream not initialized for 6039
...
also some refactoring
fix #798
2019-08-04 13:48:10 -04:00
21c61bfaec
software jump to DFU #809
...
very very dark magic it is
2019-08-04 00:21:44 -04:00
4d508693c4
software jump to DFU #809
...
different assembly magic between F4 and F7
2019-08-03 22:38:59 -04:00
7a6f933563
software jump to DFU #809
...
bugfix - looks like all the magic was not really happening
2019-08-03 20:45:15 -04:00
d6daeaa77f
DFU command & refactoring
2019-08-03 19:58:38 -04:00
91f9a50b3f
F7 nucleo does not work?
...
funny, it was about some very unused feature
2019-08-02 01:36:02 -04:00
72ad77879c
Reducing the change of no_event fatal error #894
2019-07-29 22:47:39 -04:00
2c99bf035d
software jump to DFU #809
2019-07-28 12:33:47 -04:00
339603229e
docs
2019-07-28 11:46:41 -04:00
11167dcfed
helping build
2019-07-28 01:52:14 -04:00
6f0c545e19
build repair
2019-07-28 00:36:47 -04:00
42ed1440e0
docs
2019-07-28 00:02:34 -04:00
0d994cc356
random changes related to
...
software jump to DFU #809
2019-07-27 20:33:50 -04:00
b7f398e14b
refactoring
2019-07-27 20:29:49 -04:00
810916fa34
refactoring
2019-07-27 20:18:20 -04:00
3a2e1c9990
Ola 960 made some progress towards software jump to DFU #809
2019-07-27 19:51:54 -04:00
1e73b830ac
Kinetis files (pre-alpha) ( #890 )
2019-07-27 09:52:01 -04:00
1d2d94236a
Can message ( #887 )
...
* Can
* Can
2019-07-21 08:17:09 -04:00
rusefillc
shadowm60
Matthew Kennedy
rusefi
Andrey G
David Holdeman
andreika-git
David Holdeman
NOx-z
Andrei
kon
rusEfi
Christopher W. Anderson
960
DonaldBecker