Stefan Kerkmann
|
3ef423ca8f
|
Remove otg stepping, continue rename registers usbfs
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
05a0aab253
|
Remove OTG definitions, those are present in gd32_otg.h
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
9dace8a9ce
|
Rename otg -> usbfs
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
3a51ec0bf3
|
Rename OTG1 -> USBFS
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
b8976b4fb5
|
Remove USB HS peripheral, start rename registers
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
11e6646370
|
Remove SD card interface defines
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
29be2ac3c3
|
Rename AFIO register definitions
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
2da7835bde
|
Rename GPIO registers
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
6a3caa697a
|
GPIO Remove obsolete ports, rename registers
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
adb9afc02b
|
Rename DMA CNDTR CPAR CMAR registers
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
5cec991524
|
Rename DMA CCR -> CTL
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
51b420e395
|
DMA rename IFCR -> INTC
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
186264dece
|
Rename DMA ISR register to INTF
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
962770882f
|
Rename DMA interrupt flags
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
1d3f664311
|
Add renumbered dma channel definitions
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
92646d6824
|
Rename DMA2 -> DMA1 and channels to start at zero
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
161449d7c3
|
Rename DMA1 -> DMA0 and channels to start at zero
|
2021-04-06 13:38:22 +02:00 |
Stefan Kerkmann
|
f53e5a8b44
|
Remove DMA features not found on gd32vf103
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
7d90a998bf
|
Sort and deduplicate trigger handlers
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
352a6021f1
|
Rename stm32_ to gd32_ , remove obsolete tim headers
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
73336cf3b6
|
Increase idle stacksize, add isr locking/unlocking
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
a9a4e46916
|
Replace STM32_ with GD32_
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
3467aa8ffe
|
Add STM32 HAL Drivers, already adjusted for eclic interrupts
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
ecf1e48c89
|
Add platform makefile
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
6b195cfc59
|
Add GD32 registry STM32 renames will follow
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
479375a731
|
Add eclic system reset
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
a44a68bf7d
|
Add eclic interrupt driver
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
5abb73e524
|
Migrate port and startup code to nmsis
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
bb7a299638
|
Add RISC-V ECLIC startup and port files
|
2021-04-06 13:38:21 +02:00 |
Stefan Kerkmann
|
b729125bdd
|
Add Nucleisys NMSIS sources
|
2021-04-06 13:38:21 +02:00 |
Michael Stapelberg
|
4df9abffc5
|
MIMXRT1062/LLD/PITv1: switch to internal SysTick clock (600 MHz ARM)
See the comment in the code for rationale.
|
2021-04-04 15:12:14 +02:00 |
a_p_u_r_o
|
9a861b0e8c
|
Merge branch 'chibios-20.3.x' into nuc123-kvs-example
|
2021-04-03 08:58:28 +09:00 |
Michael Stapelberg
|
9f939cec5a
|
MIMXRT1062/LLD/USBHSv1: implement hal_usb_lld for MIMXRT1062
|
2021-03-31 14:04:12 +02:00 |
Michael Stapelberg
|
119de824fe
|
MIMXRT1062/LLD/GPIOv1: implement hal_pal_lld for MIMXRT1062
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
22b4ec3b6b
|
MIMXRT1062: hal: port Arduino Teensy 4 Core startup code and linker script
The one oddity of this platform is that it requires using XIP (eXecute In
Place), which for us largely means setting up a few special sections at special
flash locations.
References:
https://www.nxp.com/docs/en/application-note/AN12107.pdf
https://github.com/PaulStoffregen/cores/blob/master/teensy4/imxrt1062_t41.ld
https://www.pjrc.com/store/teensy40.html#memory_layout
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
334fe4f499
|
enable USB1 peripheral clock in MCUXpresso v11.3.0
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
5cb023f629
|
branch mcux-sdk/boards/evkmimxrt1060/clock_config.[ch] from 66fdc6ff
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
b8c2392b13
|
MIMXRT1062: kinetis_registry: adjust IRQ numbers for i.MX RT1062
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
b11181c154
|
MIMXRT1062/LLD/UARTv1: implement hal_serial_lld for MIMXRT1062
|
2021-03-31 13:59:00 +02:00 |
Michael Stapelberg
|
a96c5d87d8
|
cmparams: set correct ARM version and number of vectors
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
1788a7468c
|
MIMXRT1062/LLD/PITv1: hal_st: set up SysTick like the Arduino Teensy 4 Core does
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
f19da3e183
|
replace file names to use MIMXRT1062
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
480534795c
|
copy LLD from KINETIS HAL (no changes yet)
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
b4b3579c86
|
branch startup (no changes yet)
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
92b862cdd0
|
copy os/hal/ports/MIMXRT1062 from ../KINETIS/MK66F18 (no changes yet)
|
2021-03-27 16:03:55 +01:00 |
Michael Stapelberg
|
7bb5555a06
|
branch PJRC_TEENSY_4_1 board from _3_6 (no changes yet)
|
2021-03-27 16:03:55 +01:00 |
Fabien Poussin
|
6683eaffb1
|
Update CRC for master branch
|
2021-03-20 23:20:15 +01:00 |
Matthew Kennedy
|
609b49a312
|
configurable MSD options
|
2021-03-04 17:08:41 -08:00 |
Fabien Poussin
|
e7cdad3d1a
|
Merge pull request #263 from mck1117/fix-msd-lun
don't deref null pointer on MSD LUN request
|
2021-02-24 20:27:49 +01:00 |
Matthew Kennedy
|
1ebdcca467
|
don't deref nullptr
|
2021-02-23 23:29:45 -08:00 |