fba2c3d5cc
safety check in altitude code
...
Make sure altitude is in expected range
2015-10-12 19:58:09 +01:00
b723f94c1f
improve code readability
...
it is possible to use traling comma, it does improve git diffs etc.
2015-10-12 19:58:08 +01:00
e8f0e0d97c
use `#defines` for ADC on stm32f10x
...
Make stm32f103 ADC more similar to stm32f30x
2015-10-12 19:58:07 +01:00
48cdf650d9
improve container_of macro
2015-10-12 19:58:06 +01:00
dc5a888633
cpm16 / cmp32 functions
...
used to compare timestamps with correct wrap. A bit more readable that typecasting in code. Only few uses replaced now
2015-10-12 19:58:05 +01:00
dbc2c15bf4
Update Binaries
2015-10-09 23:39:06 +02:00
5e87387e16
Code Cleanup // Defaults // Version Rename
...
No more version numbering. It's confusing.
Betaflight Bee Version
2015-10-09 23:33:00 +02:00
4cbff888df
D scaling adjusted to match normal Cleanflight
2015-10-08 16:34:11 +02:00
8d8d57a1f4
Set F1 target i2c to 800khz
...
Still 200us spare time left in luxfloat
2015-10-08 15:38:49 +02:00
3cdc4a23b5
Merge pull request #1370 from AustinSaintAubin/patch-1
...
Custom Airplane with Differential Thrust
2015-10-08 14:23:09 +01:00
fa2ac7fe86
Merge remote-tracking branch 'prodrone/improved_rx_failsafe_detection' into betaflight
2015-10-08 14:53:07 +02:00
f5b00031ea
Update Binaries (CF 1.11 Naze32 Rev6)
...
New Beta Binaries
2015-10-07 21:43:05 +02:00
476597ca5d
Enable GTUNE for NAZE32 target
2015-10-07 21:35:59 +02:00
1fc4f8601f
Fix MPU6500 Detect
2015-10-07 21:35:58 +02:00
9ddc12d257
Merge pull request #17 from henn1001/betaflight_cc3d_int
...
Betaflight cc3d interrupt fix
2015-10-07 21:35:26 +02:00
dbcfa5dc43
hack for cc3d interrupt
2015-10-07 21:17:12 +02:00
3f10c0c184
Update Binaries (CF 1.11 rev6 support)
...
Removed COLIBRI RACE as unsupported yet.
2015-10-07 17:40:35 +02:00
fb0b36158b
Fix MOTOLAB Target
...
Add Gtune to Motolab
2015-10-07 17:34:28 +02:00
11c3f4dd76
Correct datatype
2015-10-07 17:16:28 +02:00
12c9f65f43
Merge branch 'master' into betaflight
...
Conflicts:
Makefile
docs/Cli.md
src/main/config/config.c
src/main/drivers/accgyro_mpu3050.c
src/main/drivers/accgyro_mpu6050.c
src/main/drivers/accgyro_mpu6050.h
src/main/drivers/accgyro_spi_mpu6000.c
src/main/drivers/accgyro_spi_mpu6000.h
src/main/drivers/accgyro_spi_mpu6500.c
src/main/drivers/accgyro_spi_mpu6500.h
src/main/drivers/barometer_bmp280.c
src/main/drivers/sensor.h
src/main/flight/pid.c
src/main/mw.c
src/main/rx/rx.c
src/main/sensors/initialisation.c
src/main/target/CC3D/target.h
2015-10-07 17:12:54 +02:00
83a41565f6
Improved RX failsafe detection & handling
...
modified debug output (currently disabled)
To solve problem as indicated here:
https://github.com/cleanflight/cleanflight/issues/1266#issuecomment-135640133
and here:
https://github.com/cleanflight/cleanflight/pull/1340
and here:
https://github.com/cleanflight/cleanflight/pull/1342
Tested on FrSKY X4RSB with latest CPPM firmware (non-EU version).
Firmware filename: X4R-X4RSB_cppm_non-EU_150630
In both SBUS and CPPM mode.
2015-10-07 00:34:20 +02:00
233753009b
Disable GTune on CC3D build (code size).
2015-10-06 21:25:53 +01:00
57e5794ae1
Use the right mode (aka BOX) - replaces autotune mode. This will help
...
with migrations.
2015-10-06 21:25:40 +01:00
d04bf8abd7
Merge branch 'MJ666-Harakiri_PID_update'
2015-10-06 20:18:56 +01:00
123a4ccfc5
Merge branch 'GTune' of https://github.com/MJ666/cleanflight into
...
MJ666-Harakiri_PID_update
Conflicts:
Makefile
src/main/blackbox/blackbox_fielddefs.h
src/main/flight/pid.c
src/main/io/serial_msp.c
src/main/mw.c
src/main/target/ALIENWIIF3/target.h
src/main/target/CC3D/target.h
src/main/target/NAZE/target.h
src/main/target/NAZE32PRO/target.h
src/main/target/SPARKY/target.h
2015-10-06 20:16:37 +01:00
d36da111b2
Delete autotune.
2015-10-06 19:38:02 +01:00
6e59eb235d
Bump version to 1.11.0.
2015-10-06 19:30:13 +01:00
ba2e22ab89
Add RMDO target.
2015-10-06 19:00:53 +01:00
456396b25a
Use fixed point calculation for BMP280 barometer
...
Substitute the floating point calculation for the comparably much faster
64-bit calculation recommended for a Cortex-M3 (floating point is
recommended only in PC applications with FPU) [1]. Even if we have an
FPU, we round the temperature to the nearest 1/100th of a degree and the
pressure to the nearest 1 Pa, both of which are within the limits of the
fixed-point algorithm's accuracy.
Conflicts:
src/main/drivers/barometer_bmp280.c
2015-10-06 18:33:23 +01:00
e5f3f1794f
Add tests for BMP280 barometer
...
Also get rid of the curved quotes for normal quotes (") and make
compensation computations static.
2015-10-06 18:25:59 +01:00
0f87d1ff87
Merge pull request #1326 from cleanflight/nazerev6
...
Naze32 Revision 6 support
2015-10-06 18:23:35 +01:00
9c0aff7e38
Updated Mixer.md with more Custom Airplane
...
Added Custom Airplane for 6 Pinout Boards and Custom Airplane with Differential Thrust documentation.
2015-10-04 14:41:34 -05:00
f15cedd057
Fixes after rebase
2015-10-04 18:37:24 +02:00
e42ed1ad70
Update to integrate with BorisB filters after rebase.
...
Documentation update
2015-10-04 18:37:23 +02:00
72ff296850
Enable G-Tune for CC3D (but not included in the OPBL version)
2015-10-04 18:37:23 +02:00
edf08648bc
Replace gyroData with gyroADC in gtune.c after rebase
2015-10-04 18:37:22 +02:00
31dd2fc223
G-Tune documentation update
2015-10-04 18:37:22 +02:00
4bed8bc78a
Add G-Tune for NAZE32PRO target
2015-10-04 18:37:22 +02:00
afed9a5bba
G-Tune fix for PID controller 2 (LuxFloat)
2015-10-04 18:37:21 +02:00
a8aad05c5a
Added additional yaw handling according to Spirre's PID2 testing.
...
Flight tested with PID3 and PID5 (still functional without negative side
effects)
Additional code style updates of gtune.c
2015-10-04 18:37:21 +02:00
53531224be
Make G-Tune more configurable
...
- add two new CLI paramaters "gtune_settle_time" and
"gtune_average_cycles"
- the settle time is not depending on looptime anymore
- updated default setting to cover e wider range of copters
- remove lower limit for P value for CLI (Zero P is now posible, but
schould be used with care)
- Documentation updates
2015-10-04 18:37:21 +02:00
ef5887856d
Enable G-Tune on Sparky
...
Fix code style
2015-10-04 18:37:20 +02:00
fe2f2f3053
Fix some BlackBox isues, remove redundant code from PID controllers.
2015-10-04 18:37:20 +02:00
e7e297ad53
Modified behavior of G-Tune switch and storing the tuned P values
...
G-Tune documentation update
G-Tune will only activated and deactivated when armed.
G-Tune should deactivated while the copter is airborne.
Tuned P values will only be stored when G-Tune is enabled while disarmed
and G-Tune was used before.
2015-10-04 18:37:19 +02:00
6c022455c5
Add BlackBox recording for G-Tune
2015-10-04 18:37:19 +02:00
daceb2db9a
Fix G-Tune for LuxFloat PID controller
...
G-Tune documentation fix
2015-10-04 18:37:18 +02:00
cb5f81ca98
G-Tune documentation update
2015-10-04 18:37:18 +02:00
43f5792a61
G-Tune port from Harakiri
...
Enabled for NAZE, ALIENWWIIF1 and ALIENWIIF3 targets
Implement G-Tune for all PID controllers
The G-Tune tuning results will be save if G-Tune mode will be disabled
during copter is disarmed.
Update PID controller and G-Tune documentation
2015-10-04 18:37:18 +02:00
b20dc77a74
Harakiri PID controller make hardcoded parameters configurable
2015-10-04 18:37:17 +02:00
02a252c53e
Update Binaries (Configurator 0.66 Support)
...
Remove more targets
2015-10-04 14:40:26 +02:00
Petr Ledvina
borisbstyle
Dominic Clifton
henn1001
ProDrone
Sean Vig
Austin St. Aubin
Michael Jakob