DaTwo
862169807f
Update Cli.md
...
Updated CLI command in docs.
2015-05-07 04:46:59 -07:00
borisbstyle
da8bb6f6fc
Yaw Expo Feature
2015-05-06 22:23:40 +01:00
Dominic Clifton
e0af5f41ef
Merge pull request #697 from Supersopp/sonar_and_ADC_current_sensor
...
Updates sonar so that it can be used together with ADC current meter
2015-05-06 22:14:52 +01:00
Dominic Clifton
6f2b4f17f8
Merge pull request #849 from SteveAmor/Consolidated_developer_info
...
Consolidated development info into Development.md
2015-05-06 16:21:14 +01:00
Andrew Payne
c2f66b54f9
Clarify virtual current sensor documentation
2015-05-06 09:29:58 -04:00
Steveis
4f4f678f88
Consolidated developement info into Development.md
2015-05-05 20:15:37 +01:00
Dominic Clifton
3346d75f86
Merge pull request #805 from sherlockflight/getting-started-doc
...
Fix explanation of mincommand parameter (it doesn't relate to the Rx)
2015-05-04 09:28:08 +01:00
Dominic Clifton
d2ef645fbe
Merge pull request #823 from ethomas997/addPlaySoundCommand
...
Add 'play_sound' CLI command
2015-05-04 09:22:04 +01:00
borisbstyle
1dde2f4c2c
Update Cli.md
2015-05-02 00:35:29 +02:00
borisbstyle
ea7157dadd
Update Cli.md
...
Corrections to accidantally deleted blackbox_rate_denom values
2015-05-01 14:24:25 +02:00
BorisB
c3522882f2
yaw_fix default values
...
Pull request #802 has by default disabled yaw jump. That is fine on the
most of the configurations, but one of my multirotors had an angled
motor due to crash and this was causing weird behaviour.
It is also possible to configure very low values, which can even cause a
craft to not be able to stop after yaw and I am talking about the values
below 100 like 1.
Anyway this fix provides only valid configurable values what can't cause
any danger. Also default parameter is not unlimited anymore and is
configured to 200, which is a safe value to anybody who does the
upgrade.
cli.md is also edited
2015-05-01 13:45:22 +02:00
E Thomas
96de824f61
Add 'play_sound' CLI command
...
Added 'play_sound' CLI command; improved ACC_CALIBRATION_FAIL sound (to
make it less like ACC_CALIBRATION sound).
2015-04-27 03:46:57 -04:00
Dominic Clifton
1d069ad738
Merge pull request #813 from Petfrogg/master
...
Fixed broken link to banggood
2015-04-25 17:30:06 +02:00
Andrew Payne
68aa0b6485
Update Battery.md w/ copy edits & typo fixes
2015-04-24 15:39:05 -04:00
Jonas Harnesk
6f3574790d
Fixed broken link to banggood
2015-04-24 20:58:25 +02:00
Andrew Payne
087adabea5
Merge remote-tracking branch 'upstream/master' into documentation-edits
2015-04-23 14:14:26 -04:00
Nicholas Sherlock
ec55efd5bd
Fix explanation of mincommand parameter (it doesn't relate to the Rx)
2015-04-23 16:31:17 +12:00
Dominic Clifton
519586a5ce
Merge branch 'refactoredBeeperCode_181_1' of
...
git://github.com/ethomas997/cleanflight into
ethomas997-refactoredBeeperCode_181_1
Conflicts:
src/main/flight/failsafe.c
src/main/io/beeper.c
src/main/mw.c
2015-04-23 01:21:27 +02:00
Andrew Payne
48aa67ca12
Merge branch 'documentation-edits' of github.com:payne92/cleanflight into documentation-edits
2015-04-22 18:11:41 -04:00
Andrew Payne
c1b93ff92a
Merge remote-tracking branch 'upstream/master' into documentation-edits
2015-04-22 18:10:29 -04:00
Nicholas Sherlock
391a884d1d
Fix line wrapping of "stick positions" section
2015-04-23 10:05:02 +12:00
Nicholas Sherlock
529141527c
Add explanation of yaw controllability at low throttle (tricopters)
2015-04-23 10:02:57 +12:00
Dominic Clifton
1dc066eb73
Merge pull request #795 from Q-Branch/Updated_battery_monitoring_docs
...
Update to Battery monitor docs
2015-04-23 00:02:10 +02:00
Dominic Clifton
4c02b6ef9e
Merge pull request #778 from JohnieBraaf/master
...
Move wiki pages to docs folder
2015-04-22 23:59:07 +02:00
Dominic Clifton
efe0acbd64
Cleanup getting started guide.
2015-04-22 23:53:12 +02:00
Dominic Clifton
23698daa48
Merge branch 'docs-proposals-chris' of git://github.com/cmavr8/cleanflight into cmavr8-docs-proposals-chris
...
Conflicts:
build_docs.sh
2015-04-22 23:41:16 +02:00
Dominic Clifton
07ff844725
Clarify tpa_breakpoint and tpa_rate documentation.
2015-04-22 23:29:48 +02:00
Dominic Clifton
3e3a197809
Merge pull request #757 from azaitsev/patch-2
...
Added information about TPA rate.
2015-04-22 23:25:14 +02:00
Dominic Clifton
d58f873bb7
Merge pull request #777 from modem158/patch-3
...
Update Rx.md
2015-04-22 23:23:47 +02:00
Dominic Clifton
407f71ce6e
Merge branch 'rework-failsafe'
2015-04-22 21:25:07 +02:00
Jonas Harnesk
ca1a1903f9
Removing the git references on request from Hydra
2015-04-22 13:15:08 +02:00
Rich
248e4accba
Update Battery.md
2015-04-22 09:11:28 +01:00
Rich
884e057a10
Update to Battery monitor docs
...
Added warning note to battery monitor docs to avoid Naze32 board destruction.
2015-04-20 13:50:27 +01:00
Jonas Harnesk
f955c3aad0
In order to make a CC3D.bin you need to add OPBL=yes.
2015-04-20 14:03:44 +02:00
Andrew Payne
76970411aa
Copy edits & cleanup
2015-04-19 20:12:20 -04:00
Andrew Payne
8edd51b1e2
Merge remote-tracking branch 'upstream/master' into documentation-edits
2015-04-17 16:48:41 -04:00
Dominic Clifton
022d6247cb
Add note to documentation regarding RX sending out channel data on
...
signal loss that would cause a disarm to be registered by the FC.
2015-04-16 12:52:06 +01:00
Dominic Clifton
e51b1b4b14
Updating documentation to reflect new CLI values
2015-04-16 08:59:18 +01:00
Jan Staal
a5c8c40751
Removed reference to wiki added video
...
changed reference to new .md file
2015-04-15 22:40:34 +00:00
Jan Staal
fd260d064a
Move Building in Eclipse page
...
Taken from wiki https://github.com/cleanflight/cleanflight/wiki/Building-with-Eclipse
2015-04-15 22:30:12 +00:00
Jan Staal
e9e4f4b525
Moved Hardware Debugging file
...
Taken from wiki https://github.com/cleanflight/cleanflight/wiki/Debugging-in-Eclipse
2015-04-15 22:27:28 +00:00
modem158
2aa8b2bd21
Update Rx.md
...
Just adding documentation to help with an issue that arose today.
2015-04-15 16:50:58 -04:00
Dominic Clifton
37e551db11
Updating led strip docs. Warn users that the HowTo may not be as up to
...
date as the documentation - documentation updates via pull requests are
preferred over blog posts/videos.
2015-04-14 20:24:25 +01:00
Dominic Clifton
0ff1599a07
Merge pull request #613 from dascons/patch-3
...
Update LedStrip.md
2015-04-14 20:19:48 +01:00
Dominic Clifton
d15505b2ed
Merge pull request #745 from dkisselev/patch-1
...
Update Autotune.md
2015-04-14 20:18:57 +01:00
Dominic Clifton
f9a5ca2743
Merge pull request #727 from t0mmg/master
...
Documentation update for cli.md
2015-04-14 20:18:45 +01:00
Dominic Clifton
d6e94da2f7
Fix formatting of documentation changes in
...
b34ec00dc5
2015-04-14 20:12:38 +01:00
Dominic Clifton
b34ec00dc5
Merge branch 'patch-3' of git://github.com/Hwurzburg/cleanflight into Hwurzburg-patch-3
2015-04-14 20:09:09 +01:00
Dominic Clifton
9a2177d231
Update LedStrip documentation and add link to WS2812 datasheet.
2015-04-14 20:07:02 +01:00
Andrew Payne
6e629284fc
Clarify need to properly set the endpoints
2015-04-13 20:25:28 -04:00
Andrew Payne
06311dda39
Per feedback
2015-04-13 20:13:33 -04:00
Hwurzburg
f71c764c11
Update PID tuning.md
...
Add info on pid controller dependent behavior of RC, P/R, and Yaw Rates
2015-04-13 08:13:58 -05:00
Andrew Payne
80e3520f34
Update index.md
2015-04-12 20:56:57 -04:00
Andrew Payne
f32f90939f
Create index.md for an overall table of contents
2015-04-12 20:53:42 -04:00
Andrew Payne
8be92db41a
Copy editing, fixing grammar
2015-04-12 20:28:25 -04:00
Andrew Payne
b4b4924df7
Rewrite section about props spinning when armed
2015-04-12 20:26:30 -04:00
Andrew Payne
53f45b8795
Make references to doc pages links
2015-04-12 20:14:07 -04:00
Alex Zaitsev
2fa4932f47
Added information about TPA rate.
2015-04-11 23:11:48 +03:00
Chris Mavrakis
89131ecd4a
Added a how-to-setup-everything walkthrough guide as a README file. It explains the basic setup steps a CF noob should follow, linking to individual docs. The rest of the docs (the advanced ones) are listed and linked at the bottom. Incorporated thenickdude's, bhuism's and hydra's suggestions, too.
2015-04-11 17:49:41 +02:00
Denis Kisselev
f882750e49
Update Autotune.md
...
Typo
2015-04-08 12:31:14 -07:00
Dominic Clifton
87091802e6
Update autotune documentation.
2015-04-07 21:39:45 +01:00
Dominic Clifton
939773ce4f
Merge pull request #722 from modem158/patch-1
...
Update Cli.md
2015-04-07 21:03:42 +01:00
Dominic Clifton
687cc2823c
Merge pull request #716 from Lordnibbler/patch-1
...
Fix typos in Profiles.md
2015-04-07 21:03:04 +01:00
Dominic Clifton
caf253e4f8
Automatically disable `pid_at_min_throttle` when `retarded_arm` is
...
enabled. Closes #719 .
2015-04-07 20:59:38 +01:00
E Thomas
f02d7403af
Port of refactored beeper code 181_1
...
This the "Port of refactored beeper code #669" modification applied to
version 1.8.1 (4/4/2015) of the code.
2015-04-04 17:54:44 -04:00
t0mmg
a6939a4743
Documentation update for cli.md
...
Added descriptions for acc_lpf_factor, gyro_cmpf_factor and gyro_cmpfm_factor.
2015-04-04 12:03:38 +01:00
modem158
a2ab44c382
Update Cli.md
...
Removed part of a confusing sentence
2015-04-03 13:27:12 -04:00
pulsar
e6006232c8
using css overrides to restrict wide content resizing the pdf canvas
...
css overrides to restrict wide content resizing the pdf canvas
pdf manual building using ruby1.9, ci integration, cosmetics.
fixed typo
debugging travis build env
upload script bugfixes, fighting ruby env
fighting ruby env
fighting ruby env
fighting ruby env
2015-04-03 18:05:48 +02:00
Ben
15c2840779
Fix typos in Profiles.md
2015-04-02 21:39:52 -07:00
Dominic Clifton
9aa5753c03
Merge pull request #682 from dkisselev/patch-2
...
Fix vendor reference in GPS hardware table
2015-04-01 22:05:21 +01:00
Dominic Clifton
7dcb4d93e9
SmartPort - Updating telemetry documentation.
2015-04-01 21:52:24 +01:00
Paul Rogalinski
7899d3c38e
support for build artifact upload to a remote server
2015-04-01 16:04:30 +02:00
Alex Zaitsev
45edf752df
Update Cli.md
2015-04-01 16:46:20 +03:00
Dominic Clifton
8a9d2e3708
Updating port configuration documentation, closes #692 .
2015-03-31 13:41:00 +01:00
Per Magnus Auby
b83b9040f9
Updates sonar so that it can be used together with ADC current meter
...
Check if ADC current meter is enabled in sonarInit() and change
sonar pins to pwm 5 and 6 if it is. Same as when RX_PARALLEL is enabled.
2015-03-31 13:47:17 +02:00
Dominic Clifton
54419ef97c
Updating Sparky battery monitoring documentation.
2015-03-30 21:49:07 +01:00
Dominic Clifton
d33e4e6afd
Merge branch 'Battery_monitoring' of git://github.com/MJ666/cleanflight into MJ666-Battery_monitoring
2015-03-30 19:44:33 +01:00
Matthew Evans
f13e936601
fixed docs pidadjust screenshot.
2015-03-30 12:53:56 +01:00
Dominic Clifton
1bac2830aa
Merge pull request #642 from ledvinap/doc-pid-internals
...
Augment/improve PID Internals
2015-03-30 11:37:08 +01:00
Dominic Clifton
6922857db0
Merge pull request #683 from sherlockflight/flash-N25Q064
...
Add support for Micron N25Q064 64Mbit SPI flash
2015-03-30 11:35:42 +01:00
Dominic Clifton
20fd7b8491
Merge pull request #565 from mosh1/new_failsafe_defaults
...
Default failsafe enabled and throttle off when no valid PPM signal is se...
2015-03-30 11:15:25 +01:00
Moshen Chan
d6db3dbf08
Fix grammar
2015-03-29 23:44:12 -07:00
Moshen Chan
e110a30efc
Update docs with incorrect info for rssi_channel and add the renamed functionality.
2015-03-29 23:42:55 -07:00
Nicholas Sherlock
85dc16f96d
Add support for Micron N25Q064 64-mbit SPI flash
2015-03-30 18:17:56 +13:00
Nicholas Sherlock
01b811cd8c
Add support for Winbond 64Mbit SPI flash chip
2015-03-30 12:04:41 +13:00
Denis Kisselev
3ba865cbe7
Fix vendor reference in GPS hardware table
2015-03-29 15:08:14 -07:00
Dominic Clifton
16fda38eba
Merge pull request #625 from OpCode1300/docs
...
Board recovery documentation.
2015-03-28 20:58:55 +00:00
Dominic Clifton
02d8313437
Additional cleanup of generic Flashing docs.
2015-03-28 20:48:01 +00:00
Dominic Clifton
ab30a208e1
Updating generic flashing instructions.
...
Removing link to docs, doesn't make sense when compiled to PDF and all
documentation links must be relative.
2015-03-28 20:46:14 +00:00
Dominic Clifton
499ca8b203
Merge pull request #656 from cmavr8/docs-installation-additions
...
Docs: Added detailed steps for flashing
2015-03-28 20:40:00 +00:00
Dominic Clifton
b40b35e162
Updating GPS tested hardware list. Closes #627
2015-03-28 20:37:43 +00:00
Dominic Clifton
0c82141472
Use preferred alternative formatting for code blocks in Cli.md docs.
...
See #650
2015-03-28 20:20:53 +00:00
Dominic Clifton
0d221bded9
Merge pull request #650 from mtrl/master
...
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-28 20:18:36 +00:00
Dominic Clifton
4e07899a06
Move the updated list of user-tested GPS hardware back into Gps.md - no
...
real reason to split it out to a seperate file. Additionally the
seperate file was not listed in build_docs.sh and therefore was not
included in the PDF documentation.
If there was a section of supported hardware as an appendix to the
documentation that we could move it back, but that should be done for
GPS, RX's, LED, Buzzers, etc and all at the same time.
2015-03-25 13:28:32 +00:00
Dominic Clifton
8c5050848d
Update telemetry documentation now that telemetry_provider is gone.
...
Closes #670 .
2015-03-25 13:23:15 +00:00
Dominic Clifton
497929816a
Merge pull request #652 from sherlockflight/docs
...
Add building instructions for Mac OS X
2015-03-22 21:25:27 +00:00
Dominic Clifton
472409e7e0
Merge pull request #659 from digitalentity/patch-1
...
Update GPS tested hardware
2015-03-22 21:23:24 +00:00
Dominic Clifton
1ca00bdb9e
Adding developer docs regarding configuration storage.
2015-03-22 09:41:37 +00:00
Konstantin Sharlaimov
ec6df122cc
Update GPS tested hardware
...
Added a GPS receiver I verified to be working with CF on my quad
2015-03-22 09:19:08 +10:00
Chris Mavrakis
78b8f8908d
Added detailed steps for firmware flashing
2015-03-21 19:03:18 +01:00
Dominic Clifton
31616dd010
Merge pull request #655 from skyflyer/master
...
References cleanflight/cleanflight#631 - revised docs
2015-03-21 14:29:15 +00:00
Nicholas Sherlock
23908f9dd4
Add building instructions for Mac OS X
2015-03-21 19:12:47 +13:00
Mark Williams
8b3a5dbb73
Put CLI commands in code blocks so they appear in the markdown correctly
2015-03-19 21:17:56 +00:00
Mark Williams
a94d73ad3b
Typo fix for rate export commands in cli.md
2015-03-19 20:50:30 +00:00
Miha Valencic
aedb666909
References cleanflight/cleanflight#631 - added feature FAILSAFE and spellchecked
2015-03-19 09:47:50 +01:00
Petr Ledvina
e15322868e
Augment/improve PID Internals
2015-03-18 19:51:25 +01:00
Michael Jakob
0c0b2e8461
Enable battery monitoring for Sparky and ALIENWII F3
2015-03-17 21:35:10 +01:00
Administrator
934adfc613
Merge remote-tracking branch 'cleanflight/master' into docs
2015-03-15 19:55:13 -04:00
tracernz
0f3c4afcc4
Add note on passthrough mode
2015-03-15 17:11:49 +13:00
Administrator
f6ef4273b4
Markdown touchups
2015-03-14 23:50:32 -04:00
Administrator
4baec3eed2
Wrap ASCII board in code block to correct display formatting
2015-03-14 23:46:51 -04:00
Administrator
1747f621d4
Better formatting and more verbose
2015-03-14 23:31:34 -04:00
Administrator
c38611191d
Add 5V pad warning, and configurator setting.
2015-03-14 23:21:05 -04:00
Administrator
ae83189085
Board recovery documentation.
2015-03-14 21:34:34 -04:00
Dominic Clifton
0e2356bf00
Updating failsafe documentation.
2015-03-14 22:14:39 +01:00
Dominic Clifton
9b092a841b
Merge pull request #621 from OpCode1300/docs
...
GPS support and hardware split
2015-03-14 21:20:51 +01:00
Dominic Clifton
4cf6fe6571
Rename 'frsky_hiprec_vfas' to 'frsky_vfas_precision' and introduce enum
...
for FRSKY_VFAS_PRECISION_LOW and FRSKY_VFAS_PRECISION_HIGH.
Improves naming for humans. 'hiprec' was meaningless and
untranslatable. See
https://cleancoders.com/episode/clean-code-episode-2/show
2015-03-13 23:49:24 +01:00
Dominic Clifton
d82fc6b9be
Merge pull request #477 from projectkk2glider/projectkk2glider/issue_316_frsky_voltages
...
Fixes #316 : better arithmetics for FrSky CELL voltages, VFAS battery vol...
2015-03-13 23:40:24 +01:00
Dominic Clifton
626bd29dae
Merge pull request #592 from sherlockflight/blackbox-serial-baud
...
Support new 230400 baud rate which allows >750Hz Blackbox logging
2015-03-13 23:24:57 +01:00
Dominic Clifton
ecc6645783
CC3D - Adding instructions on how to restore the OpenPilot bootloader
...
via JLink.
2015-03-13 23:06:27 +01:00
Administrator
028d616169
GPS support and hardware split
...
Moved supported hardware to new doc. Added support for Ublox Neo-M8N
2015-03-13 14:06:20 -04:00
dascons
6f7f1d7430
Update LedStrip.md
...
Minor changes stating that the leds can now be configured by the GUI and a link to http://blog.oscarliang.net/setup-rgb-led-cleanflight/
2015-03-12 23:36:57 +13:00
Dominic Clifton
764b1ecc18
Merge pull request #576 from tracernz/vcm-doc
...
Fix error in VCM docs
2015-03-11 20:19:09 +01:00
Dominic Clifton
bf95cbcaf4
Merge pull request #602 from dkisselev/patch-1
...
Fix default value on updated pid_at_main_throttle
2015-03-11 20:17:29 +01:00
Dominic Clifton
f62b5c883d
Merge pull request #601 from tricopterY/tricopterY-patch-1
...
Update serial_msp.c
2015-03-11 20:15:24 +01:00
Dominic Clifton
3a0a4e70f9
Merge pull request #608 from icdark/patch-1
...
Fix typo in "PID tuning.md"
2015-03-11 20:11:04 +01:00
Brnadon Miller
036fa9c049
Added custom mixer examples and documentation
2015-03-11 14:20:45 -04:00
Brnadon Miller
eccdca9262
Merge remote-tracking branch 'remotes/cleanflight/master'
2015-03-11 14:04:12 -04:00
icdark
e1be456b3c
Fix typo in "PID tuning.md"
2015-03-11 12:36:54 +01:00
Nicholas Sherlock
cee021706b
Merge remote-tracking branch 'upstream/master' into blackbox-serial-baud
2015-03-11 13:31:30 +13:00
Denis Kisselev
1eae5e3ac3
Fix default value on updated pid_at_main_throttle
...
The code was updated changing the default to 1 with the last commit but that change was not reflected here
2015-03-09 19:25:38 -07:00
Dominic Clifton
44b36107a6
Documenting the ID's used for modes by the CLI.
...
See #509 , #510 , #518
2015-03-09 23:41:08 +00:00
tricopterY
fe47223453
Merge pull request #2 from cleanflight/master
...
Update from Original
2015-03-10 10:11:07 +11:00
Dominic Clifton
ed434fe47b
Use a positive named setting and variable instead of a negative one to
...
simplify the logic and aid understanding.
2015-03-09 22:50:27 +00:00
Dominic Clifton
acabbf41db
Previously, at minimum throttle, the quad would do absolutely no self-leveling
...
and simply run the motors at constant minthrottle. This allowed the chance
for the quad to lose control during flight if the throttle was set to minimum,
say, to drop from a high altitude to a lower one.
With this edit, the quad will still self-level at minimum throttle when armed,
allowing for safe decents from altitude. To prevent motors spinning when
arming/disarming, the yaw input is ignored if the throttle is at minimum and
we're using the sticks to arm/disarm.
Conflicts:
src/main/flight/mixer.c
2015-03-09 23:44:53 +01:00
Damjan Adamic
517d38c94f
Re #316 : Battery voltage calculation converted to integer arithmetic, unit tests updated to account for proper rounding of voltage
...
Added frsky_hiprec_vfas configuration option that selects how VFAS is sent
Better arithmetics for FrSky CELL voltages, VFAS battery voltage send with other ID that allows 0.1V resolution
2015-03-09 20:43:04 +01:00
Alex Gorbatchev
7331bdbd4f
Update Inflight Adjustments.md
...
Adds separators between example images so that it's possible to tell what's what.
2015-03-06 21:08:22 -08:00
Nicholas Sherlock
3b5d2b6a16
Change recommended Blackbox baudrate to 250000
...
This is because the AVR's 230400 baudrate is very inaccurate, while the
250000 baudrate is spot-on.
2015-03-07 13:07:03 +13:00
Nicholas Sherlock
644db9b8fa
Add baud rate identifier docs for new 230400 & 250000 speeds
2015-03-07 02:01:44 +13:00
Nicholas Sherlock
5e917090b6
Merge remote-tracking branch 'upstream/master' into blackbox-serial-baud
2015-03-07 02:01:03 +13:00
Nicholas Sherlock
54acc67767
Add notes about the performance of Sandisk Ultra cards
2015-03-06 23:44:05 +13:00
Nicholas Sherlock
8df0d03f44
Update docs for new Blackbox baud rate options
2015-03-06 20:31:33 +13:00
Moshen Chan
55d2ef684d
Update with failsafe_throttle default. #488
2015-03-05 18:30:05 -08:00
Brnadon Miller
7366ecf60b
Updated for colors in plain English.
2015-03-05 11:47:41 -05:00
Dominic Clifton
8e29afd167
Document baud rate identifiers.
2015-03-05 11:14:10 +00:00
Dominic Clifton
d4dd1f6a58
Merge pull request #571 from fusterjj/docs_servotune
...
Servo tune documentation
2015-03-05 00:31:31 +00:00
Dominic Clifton
94e499f9aa
Serial port documentation update.
2015-03-03 22:52:56 +00:00
Dominic Clifton
dca984ff88
Merge branch 'master' into serial-cleanup
...
Conflicts:
src/main/telemetry/hott.c
2015-03-03 17:21:43 +00:00
Brnadon Miller
e5f23669c0
Added documentation for predefined light colors for orientation and flight modes
2015-03-02 18:12:01 -05:00
Brnadon Miller
aed170f1a9
Add table for LED Strip Colors
2015-03-02 18:03:15 -05:00